Airport extreme used in a bar/campsite - payment question

a friend who owns a campsite in france wants to install airport extreme in the bar and charge people to hook up wirelessly. Is it possible to assign a 'guest' machine for a limited amount of time eg 30 mins via a login code or once its open and the code is given out is it then open the whole time? Also is it possible to have multiple codes for 20 users or would they all need the same code?

Hello seasiderdave. Welcome to the Apple Discussions!
Is it possible to assign a 'guest' machine for a limited amount of time eg 30 mins via a login code or once its open and the code is given out is it then open the whole time?
I would think yes. This would be similar to what a number of hotels that provide Internet access do today. However, this would require something like a web portal front-end that would present a login screen.
From the 802.11n AirPort Extreme Base Station's (AEBSn) perspective, you could utilize the "Access Control" feature to limit a network device by either a time period or by working in conjunction with a RADIUS server to validate user credentials.

Similar Messages

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

I bought an Apple Airport Extreme used and it did not come with any software disks. how would make it work without the software disk?

Bought an Apple Airport Extreme used and it did not come with any discs. Do i need any discs? or is there another way to setup this airport without using a software disc?

You can download the setup manual and software that you need.
Look on the bottom of the AirPort Extreme for the Model Number. It's A....... something.
Post back with the model number and the exact operating system you are running on your Mac or PC.

I am installing airport extreme using my pc what is the latest version of software i should use

I am installing airport extreme using my pc what is the latest version of software for airport extreme should I use?

AirPort Utility 5.6 for Windows.
http://support.apple.com/kb/DL1547

How can I set up airport extreme using my existing 11.g router

My existing router (ZyXEL - supplied by Telefonica with my land line) is an 11.g type and does not allow me to use iPad/iPod in certain areas of my home. Yesterday I bought an Airport Extreme and was told that I could either connect my existing router's ADSL line directly into the Extreme and connect to my Mac and other peripherals using USB or ethernet cable, or connect from the existing router.
I tried each method using Airport Utility in each case and also trying the different options offered in the set-up. It doesn't seem to want to work.
Can anyone help me please.

Further to my earlier (and first) posting, I have been playing with the airport extreme and it now works via my existing router but, it's range is less than 15 metres and that is no better than my existing 11.g router.
Does anyone know how I can increase this range?
p.s. any help in the simplest terms please.

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

Connecting iMac to Airport Extreme using ethernet

OK, I feel like and idiot! Please help!
I bought an Airport Extreme so I could connect my iMac directly via ethernet and send a wireless signal out to an iBook and a Windows laptop. I connected the ethernet cable from the iMac to the Airport Extreme, but I cannot connect via ethernet. Also, no green light comes on when I connect the cable (in the LAN <...> port).
This seems like it should be so simple, but I can't find any help on this!

don't know if you are in the US or not but shared (IP/internet connection) doesn't seem to work unless you choose US in the settings as the country where you will use the base station.
i have spent the last 3 days pulling my hair out and trying to get my airport extreme to work with no luck. wizard, manual settings.. nothing worked. i could not get 'shared public IP address' to work.. no internet unless i used bridged mode and then only on the machine with the direct ethernet connection to the base station. yesterday i had given up and i went to the store and purchased a D-Link GigE wireless router (that i'm taking back today, unopened).
I decided to give it one more try to no avail... but just on a fluke i decided to switch the 'country to be used in' to US instead of Canada (where i live) and BOOM... went through the wizard amazingly everything worked fine!!! i couldn't believe my eyes.

Configuration of AirPort Extreme Using Third Party LAN Ethernet Adapter?

Hello;
I am trying to set up my own wireless connection, not without great consternation. Any help would be greatly appreciated. Here is my current situation:
Subscribed to DSL service - installation went well, and it works fine on two other computers (that are not wireless). Installed same in computer that will use airport extreme, and it shows a connection, but won't load the browser pages.
Airport Extreme Base Station is working, software installed, etc., but computer doesn't offer airport as a connection choice in system preferences, internet connect, Airport set-up assistant, etc. (because there's no airport card installed????). Consequently, I can't finish w/airport set-up assistant.
I'm using a third party LAN ethernet wireless adapter since I was told airport cards for my G-4 are no longer made. Adapter and software installed, and shown to be working.
What am I missing?
Thanks
KAS
PowerMac G-4 Mac OS X (10.3.9)
PowerMac G-4 Mac OS X (10.3.9)

Hello Duane
Thank you for your warm welcome and quick response. I will try the AirPort Admin Utility. Your help is greatly appreciated!
-K
PowerMac G-4 Mac OS X (10.3.9)

MC340LL/A Airport Extreme using a 128 bit 26 digit password.

I may be asking the wrong question out of ignorance, but I'm confident if I am wrong someone will set me straight. I have an old cone shaped Airport Extreme, that one that looks like a flying saucer, using a WEP 128 bit 26 digit password and at least seven networked devices (two Tivos, an Apple TV, a Ceiva frame, a printer, an iPhone and a PC laptop running Vista). If I were to upgrade to a MC340LL/A Extreme, I would like to not have to reinstall those existing devices, i.e., use a different encryption. Several questions: Will I be able to install the MC340LL/A using my existing security setup and password? Is it possible to install the MC340LL/A with more "modern" security without reinstalling my existing devices? Am I asking the right question(s) or do I not comprehend the issue(s)?

Welcome to the discussions!
+If I were to upgrade to a MC340LL/A Extreme, I would like to not have to reinstall those existing devices, i.e., use a different encryption.+
I'll offer my opinion here and hope that you will get other varying opinions as well.
The simple answer here may that in order to meet your requirements, the Radio Modes on the new Extreme would have to be set down to the same "g" levels that you are using now.
This can be done, but other than possibly picking up a Guest network function, there would be virtually no wireless performance benefit with the change to the new Extreme. You will still be at "g" level wireless.
The exception might be if devices could use what is known as WEP Transitional Security, which would allow some "n" level wireless speeds. But, I'm not sure if your existing password would work in this arrangement, and I'm not sure that all of your devices would function at this setting.
If you have to make a switch, then it would make more sense to move to the much more secure settings offered by WPA2 Personal or WPA/WPA2 Personal security. (As you may be aware WEP is no longer considered secure and can be cracked by anyone with a modest toolkit).
But, I can't tell you whether the Tivos, the Ceiva, or the printer would handle this level of security. It will take some real research to learn whether devices might be compatible; and each device will need to be reinstalled with new passwords. Expect some frustration at best and probably an incompatible device or two.
The Apple devices will all handle the WPA settings and I think the PC running Vista would probably handle it as well. Can't say on the others, but if they are new...a year or two old...that would be an encouraging sign.
Please post back on your progress.

Unable to access shared USB Disks on Airport Extreme using Leopard

I have a Mac Book Pro, iMac and Mac Mini all running Leopard with all of the latest updates. I use an Airport Extreme (also patched to the latest updates), and it has a 100 GB USB drive attached.
When I was running OS X Tiger, all of my devices could connect to the shared USB drive and store files. Now that I've upgraded all of my platforms to Leopard, none of them can access the USB drive. If I try to open the disk using Finder I get the following error:
"The operation cannot be completed because the original item for "Shared Disk 1" cannot be found."
Anyone have a clue as to how to fix this?
Thanks...

I have a Mac Book Pro, iMac and Mac Mini all running Leopard with all of the latest updates. I use an Airport Extreme (also patched to the latest updates), and it has a 100 GB USB drive attached.
When I was running OS X Tiger, all of my devices could connect to the shared USB drive and store files. Now that I've upgraded all of my platforms to Leopard, none of them can access the USB drive. If I try to open the disk using Finder I get the following error:
"The operation cannot be completed because the original item for "Shared Disk 1" cannot be found."
Anyone have a clue as to how to fix this?
Thanks...

Airport Extreme - Use a Printer and Ext. Harddisk via USB hub same time?

I would like to purchase a Wireless Router that would allow me to use a printer (Dell All in One 962) and an External Hard Disk (yet to buy)simultaneously. I liked the Netgear WNDR 3700 router, but it does not support printer sharing!
Would Airport Extreme Router allow me to use both at the same time via high speed USB hub? Are all USB printers and USB external hard disks compatible with this router - any compatibility guide available?
Message was edited by: JJacob

You won't know for sure until you try, but you can get some indication by trying the following "test".
Plug the Dell device into the USB port on the AirPort Extreme and make sure it is powered up.
Open System Preferences (gear icon) on the dock and then open Print & Fax. Click the + (plus) button at the bottom of the printer list box.
Does your printer name show up in the next box? If so, click on the printer name to highlight it, then click the Add button at the lower right to install the printer at that location.
Keep in mind that if your device is compatible, only the print function will work when your all-in-one is connected to the AirPort. Scan, copy, maintenance and other functions are not supported when the device is connected to the AirPort, so if you need these services, you'll have to connect the all-in-one directly to your computer when you need them.

Airport extreme used in a bar/campsite - payment question

Similar Messages

Maybe you are looking for