Airport Extreme: Using USB to send music to a USB-DAC

Has anyone tried this? Can I send music data through the USB Port on the extreme to an external USB DAC (digital to analog converter)?
Would I still be able to use a USB hub and attach an external hardrive as well as a DAC?
Any help would be appreciated.
Thanks.

No there is no way to output music via the USB port on the AirPort Extreme base station (AEBS).

Similar Messages

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

I bought an Apple Airport Extreme used and it did not come with any software disks. how would make it work without the software disk?

Bought an Apple Airport Extreme used and it did not come with any discs. Do i need any discs? or is there another way to setup this airport without using a software disc?

You can download the setup manual and software that you need.
Look on the bottom of the AirPort Extreme for the Model Number. It's A....... something.
Post back with the model number and the exact operating system you are running on your Mac or PC.

I am installing airport extreme using my pc what is the latest version of software i should use

I am installing airport extreme using my pc what is the latest version of software for airport extreme should I use?

AirPort Utility 5.6 for Windows.
http://support.apple.com/kb/DL1547

Unable to access shared USB Disks on Airport Extreme using Leopard

I have a Mac Book Pro, iMac and Mac Mini all running Leopard with all of the latest updates. I use an Airport Extreme (also patched to the latest updates), and it has a 100 GB USB drive attached.
When I was running OS X Tiger, all of my devices could connect to the shared USB drive and store files. Now that I've upgraded all of my platforms to Leopard, none of them can access the USB drive. If I try to open the disk using Finder I get the following error:
"The operation cannot be completed because the original item for "Shared Disk 1" cannot be found."
Anyone have a clue as to how to fix this?
Thanks...

I have a Mac Book Pro, iMac and Mac Mini all running Leopard with all of the latest updates. I use an Airport Extreme (also patched to the latest updates), and it has a 100 GB USB drive attached.
When I was running OS X Tiger, all of my devices could connect to the shared USB drive and store files. Now that I've upgraded all of my platforms to Leopard, none of them can access the USB drive. If I try to open the disk using Finder I get the following error:
"The operation cannot be completed because the original item for "Shared Disk 1" cannot be found."
Anyone have a clue as to how to fix this?
Thanks...

Airport Extreme - Use a Printer and Ext. Harddisk via USB hub same time?

I would like to purchase a Wireless Router that would allow me to use a printer (Dell All in One 962) and an External Hard Disk (yet to buy)simultaneously. I liked the Netgear WNDR 3700 router, but it does not support printer sharing!
Would Airport Extreme Router allow me to use both at the same time via high speed USB hub? Are all USB printers and USB external hard disks compatible with this router - any compatibility guide available?
Message was edited by: JJacob

You won't know for sure until you try, but you can get some indication by trying the following "test".
Plug the Dell device into the USB port on the AirPort Extreme and make sure it is powered up.
Open System Preferences (gear icon) on the dock and then open Print & Fax. Click the + (plus) button at the bottom of the printer list box.
Does your printer name show up in the next box? If so, click on the printer name to highlight it, then click the Add button at the lower right to install the printer at that location.
Keep in mind that if your device is compatible, only the print function will work when your all-in-one is connected to the AirPort. Scan, copy, maintenance and other functions are not supported when the device is connected to the AirPort, so if you need these services, you'll have to connect the all-in-one directly to your computer when you need them.

Sharing Internet via Airport Extreme using a USB wireless modem

I have had to go to NextG access using a USB modem (only option). We previously succesfully had the second iMac sharing the internet connection on an ethernet-connected wireless service. Now, I cannot get the other iMac to share the connection, because there is no option to choose the USB modem.
Another problem is the USB modem is top-dog - it won't connect unless I turned off anything else using anything remotely looking like wireless (even when I have my bluetooth phone connected to another USB hub). I can connect to the NextG network after disconnecting everything else and THEN reconnect, but I just can't get the Internet sharing going. I have also had the iMac freezing, demanding a power-off-power-on (unheard of in my experience!).
Is there any remedy for the Internet sharing at all? Configuring a different channel or something on Airport? Using one of the other config options?
I think there are something like USB-to-Ethernet adaptors (pretty costly here in Australia) and don't want to shell out for one if it doesn't work. Same with a third-party router. I also wondered if I should just forget about using Airport completely and run a few metres of crossover cable?
Any help would be greatly appreciated, thanks.

Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

How can I set up airport extreme using my existing 11.g router

My existing router (ZyXEL - supplied by Telefonica with my land line) is an 11.g type and does not allow me to use iPad/iPod in certain areas of my home. Yesterday I bought an Airport Extreme and was told that I could either connect my existing router's ADSL line directly into the Extreme and connect to my Mac and other peripherals using USB or ethernet cable, or connect from the existing router.
I tried each method using Airport Utility in each case and also trying the different options offered in the set-up. It doesn't seem to want to work.
Can anyone help me please.

Further to my earlier (and first) posting, I have been playing with the airport extreme and it now works via my existing router but, it's range is less than 15 metres and that is no better than my existing 11.g router.
Does anyone know how I can increase this range?
p.s. any help in the simplest terms please.

Advice on Airport Extreme with both Mac and PC network and usb drive

I have my airport extreme connected via ethernet to my two windows xps and wirelessly to my macbook pro and apple tv.
I want to store my media (music, videos, etc) on an external hardrive accessible to all devices.
Should I format my 1tb external harddrive as HFS+ or FAT32? I understand I will have to do the formatting using OSX Drive Utility since XP can not format more than 32 gigs in the FAT 32 format.
Suggestions?

Do you have to format as fat32 if the external hard drive is connected directly to the Airport Extreme and you want to access the disc from both Windows and Mac computers?

Airport Extreme: Using USB to send music to a USB-DAC

Similar Messages

Maybe you are looking for