Airport extreme utility cannot find any wireless device. i have a tmobile web connect manager installed in the same machine.

When I run AIrport utility in my windows xp after connecting the airport base station, it tries to scan but it does not find any device. But when I connect my TMobile air card anf connect via Wifi it find the airport base but it does not have a feature to name my network and protect with a password. please help.

Finally got it working.
I think I was holding the reset button too long, and it wasn't actually resetting.
I would hold it until the light started blinking, hold it a little longer and then let go. As soon as I would let go the light would stop blinking.
However I eventually held it and counted 1 one thousand 2 one thousand etc all the way to 10 and let go when I got to 10. When I did it THAT way the light continued to blink for a bit after I let go...and since then the computer has been able to recognize it.
I think if the light stops blinking the second you release the button the thing hasn't actually reset. Woulda been great to put that in the freakin' manual...

Similar Messages

Airport Utility cannot find Apple Wireless Devices, yet I'm online!

I'm trying to enter in my SSID number for my kid's Wii to get it online, and I've tried to run through their tutorial. It tells me to go to Airport Utility and find my base station. Here's the deal, it says it cannot find my wireless device. And yet here I sit, complaining about it online.
How can I be online yet the computer not recognize it?

I finally just hooked up an ethernet connection and it works fine. I think the problem all along was the airport card in my iMac. I currently have my question about my airport card as a reply to another post from someone having a similar issue.

Airport Utility cannot find Apple Wireless Devices.

I have had my 1 TB TC for 8 months with an older AX upstairs for the Internet. I have been having many error messages come up about the WDS, but then it would fix it automatically. Then I noticed that it had not had a successful backup since 10/20. I went to go look at the settings and it has not been the same since. The Airport Utility can no longer find the TC or the AX. I have tried every kind of resetting technique I have read online. I have cleared caches and rebuilt all sorts of stuff. I have downloaded several softwares to verify items and clean house. Nothing! I even went to the Apple Store today and purchased a new AX. It found it a few times but it never stuck. The only time it can find the TC is when I plug it directly into the computer. Is it possible the wireless portion of the TC has gone bad or could my iMac wireless have gone out? The lights on both the TC and AX just keep blinking. I have been struggling with this for 7 days now when I come how from work. On the rare occasion it would actual find it it would never make it through the set up process. It either couldn’t join the network or it never restarted after clicking update. Thanks.

I finally just hooked up an ethernet connection and it works fine. I think the problem all along was the airport card in my iMac. I currently have my question about my airport card as a reply to another post from someone having a similar issue.

HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
"Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
I have clicked Rescan like 10 times
I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
I have pulled the Time Capsule plug out of it and restarted it
I have turned of my airport on my computer and turned it back on again
I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
Resetting an AirPort Base Station or Time Capsule FAQ

My Windows XP AirPort util and Bonjour can't find any wireless device

I have both macbook and a PC laptop.
I just started using my TimeCapsula and all features (Internet gateway, access to the USB printer and the external harddisk) are visible and working fine when using my macbook.
My PC wireless card seems to be working fine too and I can access the Internet using the Airport gateway.
My problem is that Airport Util and Bonjour on my PC "can't find any wireless devices" (even though It is clearly working fine) and therefore don't detect/mount the external drive or the Printer.
Thanks!

How do your Extreme and Express connect to one another? Wired Ethernet between the two, or wirelessly?
Try unplugging the Express. Does that change anything?
Wireless interference could cause the symptoms you're describing. Even though you did nothing to your wireless network, the presence of other wireless networks or introduction of nearby devices will bring interference where there was none before.
AirPort and Bluetooth: Potential sources of interference for wireless devices and networks
Try changing wireless channels; use "automatic" unless you have reason to use a specified channel. Try checking "interference robustness". Altering these settings may help, but they could make things worse.
If you are unable to configure a device over Airport, or changing a setting leaves you unable to configure it wirelessly, connect its Ethernet port to your computer's Ethernet port and Airport Utility should find it.
As a last resort, try a "hard reset" followed by re-configuring the Extreme, Express, or both. Start by removing your Express from the network. Re-configure the Extreme and see if that fixes things. If it does, add the Express to your network and re-configure it as well.
AirPort troubleshooting guide
I open airport utility ... can not locate any of my wireless devises, airport extreme base,, airport express, apple tv, wifi printer.
AirPort Utility will only detect Apple AirPort base stations (Extreme, Express, Time Capsule) for purposes of configuring them. It is not designed to detect or configure other wireless devices like your printer.

I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine

I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine - files too big
Please assist

You need to download it on one of the iMacs via App store but not install since after it installs the installation download gets deleted.
After it is downloaded you can copy to a USB device. You can also make a bootable USB install device by:
downloading and using DiskMaker X

Wifi works but Airport Utility cannot find Time Capsule Device

I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go. Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.
However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.

I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go. Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.
However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.

Extreme no longer allows any wireless device (laptops, dvd, tv, printer, game concole, etc..) to connect to wireless network.

My Airport Extreme no longer will allow any wireless devices to connect to the internet. I have tried resetting and unplugging the device and the modem without any success. I only have internet access through a wired desktop connection. The desktop is running on windows 7 and 2 laptops are running on Windows 8. (This had been working for the past 8 or 9 months. The problem started last week.). I had my cable company reset the modem on their side and still no luck. Does anyone know how I can fix this issue. The Extreme has dropped the connection to the printer, dvd players, game consoles, ipads and iphones.

Open AirPort Utility, click on the AirPort Extreme, then click Manual Setup
Click the Internet icon, then click the Internet Connection tab
The setting for Connection Sharing should read Share a public IP address
If you change the setting, click Update at the lower right to save the new setting
Wait a minute for the AirPort Extreme to restart, then power off both the modem and AirPort Extreme
Wait at least 15 minutes
Power up the modem first and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it runa few minutes
Check the network

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

I have purchased Priemier Elements 12 for Windows and Mac. I need to download Pre 12 for my new Window 8. I cannot find any Adobe products I have purchased in my account. Please help, I don't have a backup CD.

I have purchased Premiere Element 12 for Windows and mac. I cannot find any Adobe products I purchased so I can download Pre 12 to my new Windows computer.

Hi,
Please use this link for downloading premiere elements 12 on windows.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Thank You
Arjun

How Do I Connect An Airport Extreme With Password to another Wireless Devic

We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
Open AirPort Utility.
Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a password scheme from the Wireless Security pop-up menu.
Enter the password all users will need in order to join this wireless network.
AirPort Utility 5.1 Help: Password-protecting your wireless network
Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
Follow the procedure above but disable wireless encryption instead of enabling it.

Airport extreme can't see any wireless networks.

Hi, I have an iMac that has always used an ethernet connection to the internet, but now I want to connect wirelessly. But it doesn't seem to "see" any networks, mine or otherwise, which work fine on my other apple devices. Does the fact that my wireless card was purchased (as was the imac itself) overseas make it incompatible with US wireless networks? Or is the card broken and I have to take the computer in for repair? Or is there some way I can resolve it myself?
Here is what my Airport card info says:
AirPort Card Information:
Wireless Card Type:          AirPort Extreme (0x14E4, 0x88)
Wireless Card Locale:          Asia Pacific
Wireless Card Firmware Version:          Broadcom BCM43xx 1.0 (5.10.91.22)
Current Wireless Network:          wireless network not available

Yes, it does. Still doesn't "see" any networks. If I need a new airport card, is this something I can do myself or does it have to be done at an apple repair shop?

Wireless Adapter Cannot Find Any Wireless Networks

Hi,
I have a problem with my Wireless Network Adapter. As the picture shows below (cannot post image yet), although my Wireless Network Adapter is not connected to the Internet (no red X next to it), but it looks like connected!
I've tried to enable/disable it, but no luck. I tried to re-install the driver, but the same!
So, what's the problem?
Notes:
- OS: Windows 7 installed in Toshiba laptop.
- WiFi Adapter is Intel, supports 802.11a/g/Draft-N.
- WiFi Adapter appears normally in Device Manager (no marks).

Thanks guys for your answers.
To clarify the issue, the network adapter isn't connected to Internet, but it seems to be connected (don't know connected to what!)
When I run the command "netsh interface show interface" in the command prompt, it displays:
Admin State State
Type Interface Name
Enabled Connected
Dedicated
Wireless Network Connection
So, it let me be confused, what Network this Wifi adapter is connected to?!!

I can see my airport extreme network, but none of my devices (vista, ipad, iphone, ipod) can connect to it. Why?

I have set up my apple aiport extreme after moving and I can see the airport extreme light is green and I can see the airport extreme network name, but when I select the network, the device cannot connect to it. No error message appears, the device simply is in a constant state of trying to connect to the network.
I can easily connect to the non Airport Extreme network.
Can anyone help?

Try factory resetting, it often helps when changing location.

The airport utility cannot find a configured base station. How do I connect?

I just bought a Airport Time Capsule and want to configure it. I plugged-in my broadband modem into the WAN port, but when I started-up the Airport Utility, it states the message ' No configured Airport base stations have been found'. How do I configure my Time Capsule?

It should show as new device in the airport utility..
If not, factory reset it and it will show up..
You do need a Mac with at least Lion and latest airport utility.. with wireless turned on.
Or you can download the airport utility for iOS and run it on your phone or ipad.

Airport extreme utility cannot find any wireless device. i have a tmobile web connect manager installed in the same machine.

Similar Messages

Maybe you are looking for