Airport extreme utility update won't install

any reason why i can't install the latest version of airport extreme utility? i have installed it 3 times, and each time, when I go into my utilities folder, the old version of airport admin utility is there, with no update.

That doesn't make any sense unless you somehow got it in a different place than it normally downloads.
It should be under HD/Applications/Utilities/Airport Utility.
You can also try using finder to locate it.
I vaguely remember one other person having a similar problem but I think he caused his own problem and then could not correct.

Similar Messages

  • Airport extreme firmware update screwed up my IP sharing and internet

    I am having all the same problems -
    1) I upgraded to the 7.1 firmware
    2) I got the 'double NAT' error, but no problems connecting to the internet
    3) When I turned the bridge mode to off, I lost my internet, so I
    4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
    5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
    6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
    (If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
    Now I'm afraid to touch anything!!

    kayek wrote:
    I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
    I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
    Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
    Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
    {quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
    1. Open AirPort Utility.
    2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
    3. Select the specific firmware version you require.
    4. Click Download.
    5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
    6. Choose Base Station > Upload Firmware.
    7. Select a firmware version and click OK.{/quote}

  • Airport Extreme Firmware Update 7.3.2 no longer connects to internet

    Automatic Updates recommended Airport Extreme Firmware Update 7.3.2, which I accepted (BAD). The Airport Extreme does have a green light, but CANNOT connect to the internet. Cannot "Check for Updates" with Airport Utility (option key down) because I cannot access the internet. Airport Utility shows 7.3.2, but nothing lower. Is there a location on the mac where the older driver resides?
    Numerous restarts, resets, etc with both the Cable Modem and Airport Extreme and my MacBook do not help.
    How do I download 7.3.1? Can I? How can I revert?
    I can access the internet from another network, hence this email.
    Any suggestions would help!

    When I updated to the Airport Extreme to 7.3.2 firmware it was dropping wireless connections randomly, Today I reverted back to 7.3.1 and looks like it is staying up for now but I am still shell shocked. To revert back in Airport Utility:
    1) Hold down the option key(Mac), the Control key for Windows at the same time clicking on Check for updates
    This will open a popup window with the previous versions, select the Airport Extreme Firmware 7.3.1 update and click download.
    2) After the download is done, from Base station file menu drop down select Upload Firmware, you will get a choice to download different firmware updates, select 7.3.1.
    That should install the 7.3.1.
    There you go enjoy.

  • Airport Extreme/Time Capsule won't connect to internet

    When my 10-year old Linksys router died 10 days ago, I bought an Airport Extreme 802.11n. I installed it and got internet access (My operating system is Mountain Lion and I have Comcast Cable Internet). I could access a USB-connected hard drive, but couldn’t get Time Machine to work.  I was able to get my wireless printer to work when connected by USB to the Airport Extreme.
    Then, a few days ago, Apple suddenly introduced the new Airport Time Capsule 802.11ac with built in 2 TB hard drive.  Since I could still return the previous Airport Extreme, I bought the 802.11ac, unplugged the previous version, and followed the directions to install the new 802.11ac.  I used the same network name, and – I thought – the same network password.  But I could not connect to the internet.  Kept saying that I did not have the right password – even though Keychain seems to confirm the password I used. 
    So, I unplugged the 802.11ac and plugged in the older 802.11n and that instantly restored internet access (my wife uses our network and needs internet access).
    What to do? Probably return the 802.11ac. But does anyone have any thoughts on some sure-fire way to install the 802.11ac and get internet access? I see there is an app for installing via my iPad2.  Perhaps I could install it and set up a separate network/internet connection and then log on to that with our other devices? 
    I installed the 802.11ac using the Airport Utility in updated Mountain Lion (Version 10.8.4). The Apple “Software Update” on my Macbook says no updates available, but perhaps there is some separate updated Airport Utility I should use.  If so, where is it?  Would appreciate any help from someone familiar with the new 802.11ac.

    I did the power recycle, as the airport utility recommended, several times.  Also, when I reconnected the earlier 802.11n, it locked onto the internet immediately.  So, the problem does not appear to have been with the cable modem or the internet provider.  It could have been with the router (Time Capsule) but I repowered it too.  Most likely I made some mistake with the configuration.  When I tried to log onto the internet, it said my password was incorrect.  But as I mentioned, keynote confirmed the password I was using.
    When I switched from the 802.11n to the 802.11ac, I used the same network name and - I thought - the same password.  Perhaps I should have set up the network with a new name and password.  The Apple set-up instructions are pretty vague about the steps to take in switching from from a pre-existing network or changing network names and passwords.  Anyone have experience with this, which I assume would be the norm in most installations?

  • 10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

    10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

    Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

  • New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    Hello SandyJeanne,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Do I need Airport Extreme FW update?

    I use Airport Express as a transmitter for wireless LAN. I have airport cards in all three computers and the network works fine. I do not have physical airport base station.
    I have updated the Airport Express with new firmware without problem.
    In airport utility I do show base station which can be configured although there is only Airport extreme card.
    When I tried to update Airport Extreme firmware no base station showed up to be updated.
    Am I correct assuming that I don't need the Airport Extreme firmware update since I don't have the physical base station and the network is run from Airport Express?
    Milan

    I use Airport Express as a transmitter for wireless
    LAN.
    That is an Airport Express Base Station (AX) and will show up in Airport Admin Utility as a Base Station with whatever name you have given it (hopefully not Airport extreme card!).
    That's similar but different from the Airport Extreme Base Station (AEBS).
    Am I correct assuming that I don't need the Airport
    Extreme firmware
    Yes. The Express should be listed in Admin and when selected show at the bottom Apple Base Station V6.3.

  • Windows updates won't install

    Hello,
    I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
    any more information.
    I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
    anything in Even Viewer or Reliability Monitor either.
    What could it be?
    Thanks. 
    Chris Hansen

    Hi Chris,
    Firstly, please check if those Windows Update have already installed:
    1. Open Windows Update by clicking the Start button. In the search box, type
    Update, and then, in the list of results, click Windows Update.
    2.In the left pane, click View update history.
    3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
    If there is no any Windows Update installed, try to
    reset the Windows Update component to check if it could resolve the issue.
    Karen Hu
    TechNet Community Support

  • Windows Updates won't install - Error 0x80072EFD

    Question 
    Windows Updates won’t install.  I’m receiving Error 0x80072EFD.  What can I do to solve this?
    Answer 
    This particular error means that your computer was not able to connect to the Internet when it tried to install updates.  First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
    Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    To complete this method, follow these steps.
    Step 1: Make sure that Windows Firewall is turned on
    To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
    Click Turn Windows Firewall on or off.
    Click On (recommended), and then click OK.
    Step 2: Temporarily disable third-party firewalls
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
    Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
    Step 3: Try to install the updates again
    If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
    If this method did not resolve your issue, continue with Method B.
    Method B: Temporarily disable third-party antivirus software
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Locate and temporarily disable your third-party antivirus software
    Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
    Look for the antivirus software in the list of programs on the Start menu.
    Type the name of the software or the publisher in the Search box on the Start menu.
    Look for the software in Action Center:
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    If Windows can detect your antivirus software, it will be listed under Virus protection.
    If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
    Note You may have to look in the application documentation to determine how to do this.
    Step 2: Check for Windows Updates
    As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
    If this method did not resolve your issue, continue with Method C.
    Method C: Disable software accelerator programs
    Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
    Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Disable software accelerator programs
    To do this, select from the following options:
    See the documentation that was included with the program.
    View the Help files for your program.
    Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
    http://support.microsoft.com/gp/vendors
    Step 2: Install Updates
    As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
    If this method did not resolve your issue, continue with Method E.
    Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
    Start Windows Internet Explorer.
    On the Tools menu, click Internet Options.
    Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
    Click the Security tab, and then click Trusted Sites.
    Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
    In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
    http://update.microsoft.com
    http://windowsupdate.microsoft.com
    Click OK two times.
    Try to install the updates again.
    If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
    For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

    Mark, I've just been through this update issue with two installations.  In my case, it seemed intertwined with authentification and indexing not working, either.    Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it.  Which is why I did a clean install of Win7 ultimate 64bit on my T61p.  The install (including update) worked great until I ran the intel matrix storage manager update.  This broke windows update.  If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update.  I tracked this down to a driver, iastor.sys, in windows\system32\drivers.    I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed.  To be clear: I couldn't get windows update or indexing to work.  I overwrote* the "bad" iastor.sys with one that worked on another computer.  Rebooted.  Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated.  I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p?  Not listed anywhere on site, links on the web referring to it are all broken.  Is the System Interface Driver now part of another driver program?  Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

  • 10.4 update won't install

    latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.

    I'm having the same problem with Windows 7 and cannot download direct from the website. 

  • Updates won't install,billing info wrong

    Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.

    You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl .  It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!

  • Illustrator update won't install, even after uninstalling and retrying multiple times.

    Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
    The error message I get in Application Manager is:
    "Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
    Help!

    Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
    If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers.  This should then remove the Adobe Application Manager folder also inside Utilities.  Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

  • Jam Pack 4 update won't install

    I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
    Any help out there for this?

    try repairing permissions:
    http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

  • Which airport extreme utility download to use with pc?

    What airport extreme utility download to use on pc?
    802.11n wi-fi
    The one that reads for PC has a file extension .DMG?
    thanks

    You need to download the correct version of AirPort Utility based on the operating system that the PC is using.
    For XP SP3 and Vista SP2 use AirPort Utility 5.5.3 for Windows
    For Windows 7 use AirPort Utility 5.6.1 for Windows
    Both downloads are Windows .exe files

  • IPhoto 9.1 update won't install

    I just bought a new MacBook Pro.  It came with iPhoto 11.  The iPhoto 9.1 update won't install.  It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11.  I have not moved iPhoto from its default location.  My computer is only 2 days old.  I've seen others with this problem, but no real solution.  Anyone have any suggestions?

    Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer.  I registered my computer, but you can't register a product without a serial number.  I don't have the iPhoto 11 serial number because it came installed on my computer already.  I tried re-installing iPhoto 9.1 after registering my computer and got the same error message.  However, I did find out that I hae 90 days of complimentary phone support.  So I will be giving Apple a call.

Maybe you are looking for