Airport extreme verschwindet nach hinzufügen von Express

Gestern neueste Extreme und Express gekauft und installiert. Zunächst Extreme und mit Express erweitert. Jedesmal wenn die Express hinzukommt, bringt die Extreme einen Fehler und das Netz (2,4 oder auch 5) sind nicht mehr erreichbar. 10.7.5, 6.2, 7.6.3 auf den Airports.
Danke für die Hilfe

German Apfel wrote:
After that I looked in the System Profiler / Network / Airport (it is still listed) and there it shows only this:
Softwareversionen:
Menüerweiterung: 6.2 (620.24)
configd Plug-in: 6.2 (620.15.1)
System-Profiler: 6.0 (600.9)
Netzwerkeinstellung: 6.2 (620.24)
Airport-Dienstprogramm: 5.4.2 (542.23)
IO80211-Familie: 3.1 (310.6)
From the looks of this....you do not have the Airport Network adapter installed on your machine. If so, it would have another line just below the Software version that says:
Interfaces:
en1:
Card Type: AirPort Extreme (0xXXXX, 0xXX)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: FCC
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Off
You should contact the vendor and get it replaced or have the airport network adapter installed

Similar Messages

Premiere Pro CC - automatisches Hinzufügen von Audiospur der Quelle

Hallo zusammen,
mein Azubi hat mir gerade eine Frage gestellt, und mir fällt keine Lösung dazu ein.
Er hat den ganzen Tag Rohmaterial gesichtet und via Quellmonitor in eine Sequenz überschrieben. Hat aber vergessen den Audiotrack in der Sequenz zu aktivieren, so dass er jetzt 100 Clips ohne Audio in der Timeline hat. Ziemlich ärgerlich.
Mehrere Clips in der Auswahl bestehen zudem aus demselben Rohmaterialclip (mehrere Takes in einem Clip), weshalb die In und Outs in der Quelle nicht immer mit denen vom Clip übereinstimmen. Sonst wäre es ja zu einfach^^
Jetzt suchen wir also nach einer Möglichkeit, das Audio von der Quelle schnellstmöglich zu dem zugehörigen Video in der Timeline zu verknüpfen. Wenn ich auf den Clip doppelklicke, öffnet er sich zwar im Quellmonitor, aber ich habe keine Möglichkeit mehr das Audio da heraus zu ziehen. Nur noch einmal das Video.
Es wäre natürich sehr zeitaufwendig und ärgerlich, immer die In und Outs zu kopieren, im Projektfenster die Quelle zu suchen, erneut einzugeben und dann das Audio einzufügen.
Lange Rede, kurze Frage: Kennt jemand sowas wie eine magisches "Füge zugehöriges Audio zu diesem Clip" Funktion? Oder hat jemand eine andere gute Lösung?
Ich bin überfragt. Danke für eure Hilfe.

So,
ich habe jetztz selbst eine Methode gefunden, mit der es realtiv unumständlich geht. Zwar gibt es leider keine magische "Füge zugehöriges Audio zu diesem Clip" Funktion, aber mit der Funktion "frame angleichen" geht das doch ganz gut.
Einfach mit dem Scrubber/Positionszeiger/Abspielkopf auf der Timeline über den entsprechenden Clip gehen, Sequenz>frame angleichen (kann auch als Tastaturbefehl eingespeichert werden und ist Standardmäßig auf "f"). Nun sucht Premiere den entsprechenden Clip aus dem Projekt heraus und legt ihn mit allen Inhalten (Audio und Video) und den entsprechenden In und Outs in das Quellfenster. Jetzt einfach die Audioinformation schnappen und unter den entsprechenden Clip legen. Fertig.
Das geht leider nicht, mit mehreren Clips und ist auch nicht das, was ich erhofft habe zu finden - aber wesentlich besser als alles per Hand erneut zu suchen.
Vielleicht wäre es eine Idee für das nächste Update, "automatisches hinzufügen von audio zum clip" ... Support?

AirPort Extreme 802.11n (2nd Gen) no Guest Network capability?

I have an "AirPort Extreme 802.11n (2nd Gen)" according to a serial number lookup here.
I am not sure if this is the same as MB053LL/A which is mentioned is this archived thread. (Couldn't find a way to lookup the part number + couldn't find the tech specs at apple.com.)
I was wondering if this base station has the capability to setup a guest network in addition to the primary network.
According to the above mentioned Apple Discussions thread, the base station needs to have simultaneous dual band operation capability to make this possible. (Since I couldn't find the tech specs, I'm not sure what this base station has.)
I would assume from this Knowledge Base Article that the 2nd generation AirPort Extreme is one generation too old:
http://support.apple.com/kb/HT3477
Am I correct?
(It's set to "Share a public IP address" under Connection Sharing.)

Hi, flips01. You are correct. Simultaneous dual-band was introduced with the 3rd generation.

Airport Extreme 802.11N (5th Gen) frequent crash

I had bought an Airport Extreme 802.11N (5th Gen) that died a few months after purchasing it. I had the unit replaced via Applecare in May 2013.
The new unit's firs recorded crash was in August 2013. After that, it crashed sporadically, these instances were not recorded. In May 2014 it crashed twice in one day. Every time of a crash, I've had to effect a hard reset to factory presets and upload a saved configuration. This last time I reconfigured from scratch and saved the new config. Now it crashes regularly, every month since September. I have no idea what to make of it.
Considering that I had one of the original Silver units running for years (and upgraded with a more capable Orinoco card—if you know what I'm talking about, you know that's old!). I expected to get reliable service from this more advanced unit. So far, It's a bit of a dud.
Any ideas? Any diagnostic tools I can use to see what's happening? Does this run of Airport Extremes have "issues"? Should I bother getting one of the new tallboy unit?
Thanks.

I have found the Gen5 AE to be very reliable.
I would have blamed a dud unit.. except that you have had two of them.. So I would be tracing where the problem is apart from the AE.
What modem do you run? How is the AE setup in the network?
The older utility is of far more use than the one in Yosemite. So do you have available an older OSX version or even windows.. you can see the logs from the unit.. just like you could in the original B and G versions.
(and upgraded with a more capable Orinoco card—if you know what I'm talking about, you know that's old!
Know exactly what you are talking about.. Orinoco were most desired for their use with wifi scanners.
How is your power?? Apple stuff does seem to use stuff that is highly susceptible to spiking. I keep my network stuff on UPS. (or battery direct feed).
I also do not like 7.6.4 firmware.. I know others here might find it ok but I can clearly demonstrate worse performance with it. Direct A-B testing.
Take the firmware back to 7.6.1 and factory reset and see if you get any improvement.
To actually need to restore firmware settings is not normal.. so something major is wrong and in unusual way.. I think power is one key part of it.

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Airport Extreme 802.11AC + 5th Gen and guest network access

I have the current gen Airport Extreme 802.11AC with a 5th Gen extending the network. With this setup, I am unable to login using our guest network setup. I have tried using guest network with a password and one without but its the same results. When a guest logins, it stuck attempting to login with no error messages.
So is it possible to have this configuration and still have guest network access?

Please review what I said originally.......that the guest network function on the AirPort Extreme is designed to work with a simple modem......so the AirPort acts as the main router for the network..
Another way of saying the same thing is that the AirPort needs to be "in charge" of your network for the guest feature to work correctly. The AirPort cannot be in charge if it is connected to another device that is already configured to be the main router on your network.....your Actiontec modem/router.
The Actiontec device combines the functions of a separate modem and a separate router in one package. This type of device is known as a modem/router, or also known as a gateway.
Some folks call a modem/router or a gateway......a modem. So, things can get confusing.
I do not know if it is possible for the Actiontec device that you have to be configured to act as a simple modem.....so the routing functions of the device are completely turned off. (Turning off the wireless on the Actiotec does not turn off the routing function).
If you turn off the wireless on the Actionec, it becomes a modem and a wired router. And that wired router is still in charge of your network.
The guest network feature will not work correctly unless the AirPort is in charge of your network.
My suggestion was for you to ask your Internet Service Provider (ISP), if they could supply you with a simple modem. That is all that you need. You don't need two routers....and the Actiontec that you have now is not allowing the guest feature to work correctly.

Can I use Airport Express to extend signal from my Airport Extreme and then run Ethernet from Express to my TV which requires ethernet to access internet?

As stated in title. I want to access Netflix but my TV requires ethernet connection. I would like to use Express to repeat Exreme sigal and then to TV via Ethernet. I only have one access point in house for cable modem so I'm using Extreme to broadcast though house. Will need to be able to input network key for Extreme secure network. Thank you.
Mike

Are both your AirPort Extreme and AirPort Express 802.11"n" devices?
If yes, you can configure the Express to "extend a wireless network" and it will provide more wireless coverage and the Etherent port will be enabled so that you can connect an Ethernet device.
This assumes that the Express is located where it can receive a strong signal from the AirPort Extreme.

Airport Extreme: Can it be linked with express?

I like the airplay option that comes with express. I am surprised that the Extreme and Time capsule do not come with this simple option. I already have express and I want to be able to use my hard drive(s) wirelessly.
Also, can I directly wire my desktop to the Airport extreme with an ethernet cable?

I like the airplay option that comes with express. I am surprised that the Extreme and Time capsule do not come with this simple option.
Actually, it is NOT a simple option as it would require a complete redesign of either the Extreme or Time Capsule to include the audio hardware provided in the Express. However, I would agree with you that it would be nice option to have this feature with all Apple routers.
I already have express and I want to be able to use my hard drive(s) wirelessly.
Unfortunately, you won't be able to use the USB port on the AirPort Express for this as it doesn't support external USB HDDs.
Also, can I directly wire my desktop to the Airport extreme with an ethernet cable?
Yes. You can connect your desktop, via Ethernet, to any of the available LAN ports on the AirPort Extreme.

Using Airport Extreme 802.11n (5th Gen) router attached to local cable modem (time warner) I am trying to cover about 11,000 sf wirelessy but only get coverage in 75%-how can I increase my distance?

Thank you for pointing me to these articles. Please keep in mind that I am a total novice...this may be a dumb question: If you setup using the "preferred method" of a roaming network, how does having two wi-fi base stations connected to each other via ethernet extend the range to allow wireless access at a greater distance from the room you have this in?
Also, if you do the extended or the roaming network, are both units required to be "airport"? I have the Airport Express but I also have a Cisco Dual-Band Wireless-N Router - could I use this with the Aiport Extreme or do I need to purchase another Airport Extreme?

If you setup using the "preferred method" of a roaming network, how does having two wi-fi base stations connected to each other via ethernet extend the range to allow wireless access at a greater distance from the room you have this in?
When two or more wireless base stations are configured in a roaming network, they are all interconnected by Ethernet. Each base station will retain a unique base station name, but will use the same Network Name (also called SSID), wireless security type, & password. As far as wireless network clients are concerned, this type of network will appear as a single wireless network. You can literally walk (roam) with a laptop between routers and still be connected to the "same" wireless network.
In my case, I have a main Internet router that provides an Ethernet network (backbone) throughout my 2-story home. On each floor I have placed an AirPort base station that connects back to this main router. Both AirPorts are configured for a roaming network. This configuration allow me to be in any room on either floor and still get wireless Internet access.
Also, if you do the extended or the roaming network, are both units required to be "airport"? I have the Airport Express but I also have a Cisco Dual-Band Wireless-N Router - could I use this with the Aiport Extreme or do I need to purchase another Airport Extreme?
For an "extended" network, both units will need to be AirPorts. For a "roaming" network, they can be units provided by different manufacturers. Again, in my example, the "main" router is a Cisco RVS4000.

If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

I operate an old airport extreme base station 802.11n (3rd gen).
There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
I get a sense that the iphones may/will be useless the new airport.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
Thank you.

I get a sense that the iphones may/will be useless the new airport
They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

Airport extreme connects to router fine, but express doesn't

Hi,
So here is my setup:
Router -> Ethernet cable -> Airport Extreme = Wifi
This works absolutely fine. My problem is that I use an airport express to boost the extreme signal, and it's not working.
I get two errors, "Internet connection" and "No DNS Servers".
But after reading up on this, people are saying it's a problem with the communication between the express and the router.
But the airport extreme is communicating perfeclty fine with the router.
Any ideas would be very helpful,
Thanks

Welcome to Apple Discussions!
I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
Good luck!

Airport Extreme card for 1st Gen. Mac Pro

Hey guys. I have a 1st gen. (purchased Sept 2006) Mac Pro that doesn't have the Airport card installed. Which card do I need to buy and where I can find it? What is the model/service part number I need? I called two Apple stores in OK and they said they could install the part but they couldn't order it for me.
My serial number is G86**UPZ if that helps any.
Thanks!

http://www.macwireless.com/ may sell a PCI card you can use.
There are also ethernet to WiFi bridges you can use too.
If you are adventurous, Google revealed this result which was referred to by a Macnn thread:
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

Hinzufügen von Bilder in ein Hintergrundbild

Huhu
Für viele von euch ist meine Frage bestimmt lächerlich, aber ich habe noch nicht so viel erfrahrung mit dem Programm. Ich möchte gerne in meiner Com eine Unterwasserwelt machen. Ich habe den hintergrund und auch die Bilder die ich einfügen möchte, aber irgendwie bekomme ich das einfach nicht hin.Vieleicht kann mir jemand von euch einen Tip geben. Im Voraus schon mal danke.

Hallo,
lächerlich ist solch eine Frage nicht, aber um helfen zu können, benötigen mögliche Helfer auch einige Daten! Außerdem ist eine solche Frage im Print-Bereich besser aufgehoben (Da gibts auch mehr Leser).
Welches Programm + Version? (oder in diesem Falle vielleicht welche Programme stünden sonst zur Verfügung)
Welches Betriebssystem + Version?
demark

I have a 2nd gen airport extreme (no time capsule) and 2nd gen airport expresses: is there any new additons I can make to my existing network to improve reach and integrity of signal?

I have the older airport extreme and 2 2nd gen airport expresses in a large house. Lately I have been getting complaints about internet "drop out" and weak signal (orange signal - weak network) in one (oddly enough the nearest one to my extreme). What can I do to insure network and internet integrity going forward. Do I buy a new a. extreme and convert the old one (how is also a question)? Do I buy new expresses? (and why) Do I move the original express out of room and get longer internet cable? Extreme is upstairs in a split level and must remain there because of proximity to modem and its connection to security. The "working" express is all the way on the other side of the house through 2 concrete walls and does ok - though signal is understandable week. The nearer one with the "problems" is at the foot of the stairs less than 50 feet away, behind an always closed door (not tested-belongs to teenager voicing complaints). Incidentally the other bedroom directly across from the closed door one, houses a temporary adult child at home who has no problems with their lap top (2nd gen macbook) and signal.

There is no easy answer to your question, but here are some things to think about.
The newest generation of airport extremes and expresses are dual-band devices. they transmit on both 2.4 GHz and 5 GHz frequencies. the 2.4 GHz frequency penetrates walls better than the 5 GHz frequency which is faster in terms of data throughput. they also have improved antennas which may help your signal problems. unfortunately the only way to be sure would be trial and error you can also walk around with a laptop and monitor the signal strength to see where you have dropouts and consider repositioning your express devices to compensate .

Older Airport Extreme with new Airport Express

I have a new Airport Express and an older Airport Extreme (I think 1rst gen). I have been using the Extreme for a few years now and just got the express to help me extend the extreme. The Extreme's signal is very weak in some parts of my house. I cannot hook the two together via ethernet. Needs to be wireless. What's the best method? I only use the wi-fi for internet access and tv (netflix, HBOGO, etc). I do not share printers or hard drives. I'm wondering if the new express is better (range) than my older extreme? Should I use the express as my main base station?

Your Extreme should still provide better overall range over the 2nd gen 802.11n AirPort Express Base Station, so I would still recommend that you leave the Extreme as your "main" router.
You will want to use the following instructions to extend the wireless network from this Apple Support article.
The key to success if extending the Extreme is to place the Express within a 25+ dB SNR range of the Extreme as it can only repeat the signal with the same bandwidth that it receives it. If the signal is very weak the Express may not even be able to extend it at all.
Check out the following AirPort User tip for details on optimal base station placement. Please post back your results.

Airport extreme verschwindet nach hinzufügen von Express

Similar Messages

Maybe you are looking for