Airport Extreme wired or wirelessly ?

Hi,
I have an Airport Extreme (AE) that is connected to my iMac G5 by an ethernet cable. AE is also connected to my cable modem and a laser printer.
I connected a USB drive to the AE. Does the drive communicate to my iMac by the ethernet cable or wirelessly ?
Thanks in advance.

{quote} You wrote: ... provided that the AirPort Extreme is creating a wireless network and you have AirPort turned on at your iMac.{quote}
... only if I want to create a wireless link between my AE and my iMac. As for the wired connection, the ethernet cable is the only condition required.
Is my understanding right ?
Bob is correct, but to be completely accurate in Network Preferences > Show "Network Port Configurations", Built-in Ethernet should precede AirPort in the ordered list. That way, if both connections are available, your iMac will give preference to Ethernet over a potentially slower Airport connection.
The iMac constantly attempts to use any available port, but it uses only one at a time.

Similar Messages

Airport extreme wired AND wireless at the same time?

Very sorry for this newbie question. Can i have my iMac wired to my computer with ethernet and wireless at the same time?
If so, what ports to i plug what into?
My guess is modem-wan port on extreme and a cable going wired from the ethernet port on the extreme to the iMac?
Do i need to do any configuring?
Thanks!

The operatibe word here is EXPRESS
To the best of my knowledge the ethernet port on the express is for ethernet IN not out
http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf The pertinent diagrams are like page 20 - 25
Now you can actually do what you are talking about with an extreme.. an extreme can, in theorey operate as an remote/relay taking incoming signal giving you one - four out bound ethernet ports
that info can be found in the manual on setting up a WDS
the only thing to remember is .. the weakest leg controls.. if your wireless signal to the relay is poor. any thing using the relay for access will also be poor
I have found out the hard way about that
hey you can get good price on bulk cat 5

Best configuration for Time Capsule & Airport Extreme running one wireless network?

We just moved to a house that does not have Ethernet pre-wired so I've had to re-setup the wireless network in a different configuration and it seems we're experiencing deteriorated wireless signal for devices like laptops. It will work perfectly fine (and fast! wheee!!!) but then it will slow to a crawl and mostly timeout. before I reset everything and start from scratch, I'd like some help. As an FYI, when connected via Ethernet to either of these, Internet is blazingly fast… so my problem here is the Wireless portion.
As some background, here is how we had the network set up in the previous house which was working great (although it was wired for Ethernet which made things A LOT easier):
Airport Extreme (4th Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Location: Upstairs Utility Closet (with Smartbox and cable modem)
Time Capsule (1st Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above, but also connected to the Ethernet jack
Location: Upstairs Office
Here is the current set up we have running:
Time Capsule (1st Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Radio Mode: 802.11n (b/g compatible)
Location: Upstairs Office
Airport Extreme (4th Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above with NO incoming Ethernet connection
Location: Downstairs Family Room
My understanding is that the Airport Extreme should pick up and relay the signal downstairs, as well as provide the router for the devices downstairs that need Ethernet (TiVo, Apple TV, etc).
So, my question is (and thank you in advance for helping me sort this out!), what would be the best configuration to optimize the Wireless performance in the house?
Also, for whichever device is the one picking up the existing network and providing the router capabilities for the Tivo and such, is it possible for it to pick up but not rebroadcast the signal? I think in this new house we may have a good enough signal from the office, without the need to rebroadcast it. My theory is that in this house, they are too close together and interfere with each other and/or devices aren't sure which to choose so they bounce back and forth endlessly. Again, just a theory.
Many thanks again for your help! If I've left out any information, please ask and I can provide.

Should they be running on the same channel (as with the "Extend" option previously? Or just both on Automatic channels?
I would recommend the Automatic setting on both devices because this will allow each router to scan and choose an open channel automatically. If you want to set the channels manually, keep them separated by at least 4-5 channels. You would not want to ever use the same channel for both devices in this type of "roaming" setup.
Is there a way to limit bandwidth per device (or action) so that it doesn't monopolize the network and keep other devices from using it?
Nothing that I am aware of. It sounds like you have some young users who are likely visiting Bit Torrent sites, which will really gobble up the bandwidth with big, heavy downloads. The Time Machine has to back up the same files again when it makes the next pass, so that clogs things up again.
Backups would go 3-5 times faster, on average, if the computer(s) could connect using Ethernet, but I understand that wires are not cool with the younger crowd.
should BOTH the TC and AE be set up in Bridge mode?
The AirPort Extreme should be set up in Bridge Mode.
The Time Capsule...it depends. If the TC is connected to a simple cable modem...then the correct setting for Connection Sharing would be "Share a public IP address" on the TC. That is because a simple modem has only 1 IP address to deliver. The TC takes that address and "shares" it with other devices by setting up a local network for all your other devices.
If the TC is connected to a gateway....a combination modem/router in the same box that usually has 3-4 Ethernet ports on the device....then that device would be considered the main router on the network and the TC would be configured in Bridge Mode in that case to function correctly on the network.

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?

I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?

Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?

If it "joined" my network is it extending the coverage of my wifi network ?
Please review my previous answer in the post above......
But, the Express does not "extend" or "repeat" the wireless signal when it joins a network. In other words, wireless devices cannot connect to the AirPort Express the way that you have it set up.
If so can my Airport Extreme be set up to "join" my network and also extend the coverage of my network ?
Again, please review my previous answer in the first reply above......
The AirPort Extreme does not have this type of capability.
If you have both an AirPort Extreme and an AirPort Express.....my suggestion....again, found above in a previous post.....
It takes a minimum of two Apple routers to extend a signal using wireless.
You could do this by connecting the AirPort Extreme to your cable router using a permanently installed Ethernet cable and then configuring the AirPort Extreme to "create a wireless network".
Then add an AirPort Express in a location where it can pick up a strong wireless signal from the AirPort Extreme and configure the Express to "extend a wireless network".
You would not use the wireless on your cable router at all, unless you wanted to reserve that network for guests or something similar.

Can I use my Airport Extreme as a wireless bridge?

Can I use my Airport Extreme as a wireless bridge?

When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
But, the AirPort Extreme cannot do this with a product from another manufacturer.
So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Does this article apply to OS X Lion and Airport Utility 6.0?
Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
You can't find the Airport Extreme then...
I woudl suggest doing a Factory reset....
http://support.apple.com/kb/HT3728
Then you should be able to set it up just as you did when it was new....
Factory default reset (using reset button)
If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
Unplug the AirPort Base Station or Time Capsule from power.
Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Yes, if the AirPort Extreme is joining a wireless network that has been created by another Apple router. In this case, it will be extending the wireless network and the Ethernet ports are enabled on the "remote" AirPort Extreme.
No, if the AirPort Extreme will be used with another router from another manfacturer.
Ironically, the less expensive AirPort Express can do what you ask about with virtually any wireless network using a special feature called ProxySTA. It won't extend the wireless with a non-Apple router, but the Ethernet port will be enabled.

Airport Extreme Base Station Wireless Woes

Hi,
I just bought this dual band Airport Extreme Base Station on 3/10/2010. After I setup the Airport, I have difficulties connecting my iphone 3GS to the base station. My iphone 3GS is able to see the wireless network but not able to join it. Only my macbook pro is able to connect wirelessly. My windows PC and iphone 3GS could not.
I wonder whats could be the problem?
Some logs from the base station:
Oct 06 23:00:04 Severity:5 Associated with station <mac address of iphone 3GS>
Oct 06 23:00:04 Severity:5 Installed unicast CCMP key for supplicant <mac address of iphone 3GS>
Oct 06 23:00:04 Severity:5 Disassociated with station <mac address of iphone 3GS>
Oct 06 23:00:04 Severity:5 Rotated TKIP group key.
Setting of Airport Extreme Base Station:
Wireless Security: WPA/WPA2
Wireless Channel: Auto
Creating a new network
Things I have tried:
1) Changing the wireless channel
2) Removing the wireless security
Thanks

I think I manage to find the problem on why my airport extreme keep on dropping connection.
This is my connection.
Cable Modem -> Airport Extreme -> Aztech Gigabit Homeplug 1-> Aztech Gigabit Homeplug 2 -> Dlink DIR-825.
When I plug out the conenction from Airport Extreme to Aztech Gigabit Homeplug 1, I am able to connect to the wireless using iPhone 3GS. Once I plug back the connection and do a refresh the iPhone 3GS wifi connection, I am not able to connect the wireless.
Hmm, anyone faces the same problem?

I am using a verizion jetpack to wireless connect to an airport express next i want to connect a Airport extreme wired from toe express to create a second private network that has internet access via the jetpack

Thanks for the help after looking over your sugesstion I did some additional troubleshooting which i should have done in the beginning and heres what i found
Airport express is joined to and existing wireless network and i have internet access....all good
I set up my Airport Extreme as follows:
                    Connect using :ethernet
              Ethernet Wan Port : automatic
              Connetion Sharing : Share a public IP address
Tcpip      Configue IPv4: Using DHCP
DHCP                   Begin address: 172.16.22.200
                           Ending address: 172.16.22.254
Wireless    Create a wireless network
                         Wireless network name Test1
                          wpa2 security
This is needed due to set ip address of device on this private network did not address NAT
Conneted Express ethernet port to Extreme wan port
All wired devices have internet access and i get a double nat status which ignore
however my wireless device will not connect.... sometimes they will they want
any suggestions

Here are sceeen shots of the Express

Airport Extreme wired network can't assign IP address, but wireless works

*Problem details:*
We have three computers intermittently on, wired into the ethernet LAN managed by the Airport Extreme.
We have a few more computers that connect to the wireless network managed by the same Airport Extreme.
As far as I know, no fancy settings hijinks have been attempted. I manage the router, and I only plugged the Airport into the cable modem and connected all the wires to the computers. The WiFi setup went a similar way -- I just turned it on and it sorted itself out. This was eight months ago, mind you -- everything has been going quite well up until this weekend.
But! I got home from a trip this weekend to discover that all the machines that connected over the wired network could no longer get a connection to the internet. Any machine connected over the wireless network, however, was working just fine. Indeed, my macbook pros couldn't even see the Airport Extreme when I turned off their WiFi, connected them over Ethernet and opened the Airport Extreme configuration app!
The wired machines complain that they have a self-assigned IP address. Sometimes, after resetting everything, they look like everything's fine for a moment. Like I said, ordinarily my macbook pro does not even recognize the router over the wired network. However, after reverting to factory defaults and restarting the Airport, the laptop did see it (until a few minutes went by and it realized something was wrong).
I figured that renewing my DHCP lease would fix this problem, but it did not. Nor did turning off Passive FTP Mode (PASV) under Proxies in the Network configuration pane.
I have tried resetting the router to factory defaults, power cycling the modem and router in various configurations, etc. but nothing has worked. In addition, I have verified that connecting any machine to the ethernet directly from the modem will work, so the problem is definitely being introduced by the Airport Extreme.
So I guess my question is: what do I have to poke to return everything to normal? I'd like working wired and wireless networks again.
*Some last few details:*
The Airport is running 7.5.2, but downgrading to 7.4.2 produced no tangible difference.
I have an Ubee D3.0 modem. All lights are green and blinky except the DS light, which is solid amber (and it is green when the modem is wired directly to one of my computers -- it's only amber when connected to the Airport).
Some of the machines that can't connect to the wired network are PCs, so it's not just an OSX thing.
My roommate's XBOX 360 can connect to the internet over the wired port. It doesn't have WiFi, so I'm pretty sure there's no way it could be fooling me.
Thanks in advance for any advice you can muster.
EDIT FOR APOLOGIES:
I didn't realize I was posting this in the "Airport for Windows" section. While a Windows computer's connection is a concern, I would much rather get my Macs online and deal with that first. I can't figure out how to move the message myself.

*An update:*
Several days later, this issue seems to have fixed itself. I suspect there may have been Funny Business on my ISP's end (but then again, it's an ISP).

Wired Mac on Airport Extreme slowing down Wireless network?

I have an Airport Extreme 802.11n and a MacBook Pro 15" (unibody). I recently added a MacMini Core 2 duo as an iTunes server, and since it didn't have 802.11n (it's an older one), I shut off the WiFi and ethernet cable'd it to my Airport Extreme. It works great; I can see the Mini in Shared devices from the MacBook Pro, share the screen, and my Apple TV syncs beautifully as well.
Then today I noticed that the internet connection on my laptop was really slow. After some chasing I realized that the same speed tests from http://www.speakeasy.net/speedtest/ ran on the ethernet-Mini vs the WiFi-MacBook Pro were radically different. At any given time, the speed on the MacBook Pro was as low as 25% the speed on the Mini… sometimes even worse!
I discovered that if I shut down the Mini, the MacBook Pro speed increases. Not to the same point as the Mini, but I can attribute some loss to just being on WiFi and only getting about 60% signal strength (according to iStumbler -- even though the mac WiFi signal strength shows full bars… anyway). But in the past (before the Mini was added) I've run those speedtests and seen results like I'm seeing now only on the Mini.
So why would this tethered Mac be causing such a slowdown?
I'm about to upgrade to the new Time Capsule with separate 802.11 b/g and n antennas but would like to understand this problem before I make that upgrade. Something else feels wrong to me.
btw I did recently upgrade to the 7.4.1 firmware (at the same time I did the Mini addition… poor science, I know), and so I tried reverting it back to 7.3.2 to see if that made any difference, and it did not.

So I started poking around a bit more this morning, and ended up doing a slew of tests. A LOT of tests. I tested two different portables and the Mini, tested with the Mini off and on, and tested with Safari 3 or 4 (depending on what was on each system) and Firefox 3. I then tested the portable plugged directly into the wire.
I ran each test three times and averaged them.
There are some very interesting results.
Tests with Mini on vs. Min off makes a negligible difference on average on Safari. However Firefox performance consistently went down with the Mini off.
But here's the big shocker – performance of any wired computer was between three and TEN (!!!!) times that of the wireless! This is unbelievable.
Worth noting I was sure to disable all other wifi devices on the network, even the other portable, when performing the tests. Apple TV and iPhones were all powered down during these tests.
All my test results are visible here on iWork.com here: http://bit.ly/KYGTj (I think anyone can log in using an apple ID, if not then email me or post your email address here and I'll add you to the list)
Feel free to download the Numbers files and perform your own comparison charts.

Airport Extreme doesn't wirelessly connect to internet unless a wired connection exists

I have a 5-6 year old Airport Extreme that has started acting up. I have 5-6 devices (ipods/ipad/imac/windows pc) that normally don't have a problem connecting to the extreme wirelessly & have an xbox 360 connected via cable. Just recently I've found that none of my wireless devices can connect to the internet without the xbox 360 being turned on & signed into the internet ... the xbox doesn't seem to have any connection issues at all through the cabled connection. I hadn't updated the firmware or made changes to my network before this started, I just applied the latest firmware update to the extreme but it didn't solve anything. I've searched for solutions elsewhere but really couldn't find any solutions.
Any hints or is it time to retire this admittedly aged router?

If you have the HP 2605dn printer attached to the 802.11n AirPort Extreme Base Station (AEBSn) (or any router) by Ethernet, then the AEBSn is NOT performing as a Print Server. Instead, the printer itself would have to be configured to provide this service.
I don't have this particular printer, but I do have a network-ready HP Officejet model that I have my network clients (Macs, PCs, & even Linux) connect to. The key is either using the unit's interfact panel to configure the appropriate network settings specific for your network.

Airport Extreme wired or wirelessly ?

Similar Messages

Maybe you are looking for