Airport Extreme with Bluetooth 2.0 Wireless Card

Can anyone recommend a feasible solution to the Airport Extreme with Bluetooth 2.0 + EDR card? I can only find it at Mac-Pro.com and they want a whopping $217 for it - ridiculous. I assume the cost is so high because no one else has them, but alternatively, I may just go with a Wireless 802.11g Compact Wireless USB Adapter and see if it connects.
Anyone had any luck finding this particular Airport card under $100 or tried alternative means to get a good connection with their wireless router on a PowerMac G5 (Late 2005)?

The Airport/Bluetooth upgrade kit that you're looking at from Mac-Pro.com is only sold as a replacement part, which is why it's so expensive. Same reason why the replacement video cards are also so expensive.
Welovemacs.com also has them, but the price is pretty much the same since you need the Airport/Bluetooth card, the runway card, and the standoffs (all provided together in the kit).
There isn't any selection in PCIe wireless cards for Macs, that I'm aware of. MacWireless.com has a USB stick that'll work and offers 802.11n speeds.

Similar Messages

  • Airport Extreme with Bluetooth 2.0+EDR card question

    Does anybody know what Apple charges for the Airport Extreme with Bluetooth 2.0+EDR card and the install. I've tried to find out at my local Apple store and was told I'd have to make an appt. at the Genius Bar and they are booked solid today. This is going in my PowerMac G5 duel so I can run Apple TV with the Airport Extreme.

    Thanks! for the quick response!
    I'm hoping Apple will coming up with a cheaper option though.
    With everything I need to get Apple TV to work, my best estimate on cost is around $600. Yikes.

  • AirPort Extreme with Bluetooth 2.0+EDR Card for Apple Dual Core

    Hello everybody,
    Where can I buy the AirPort Extreme with Bluetooth 2.0+EDR card for a new Apple PowerMac G5 2.3 Dual core? What websites or locations in Los Angeles sell this card?
    What workarounds are out there?
    Thank you all for your answers.
    Apple G5 Dual Core   Mac OS X (10.4.3)   HD Cinema Screen

    The new Dual Core G5 machines do indeed come shipped in the base models without Bluetooth or Airport Extreme. There will be a solution available through the local ASP's (Apple Service Providers) and Apple Genius bars in the Apple owned Retail stores. Many of the store employees are not fully aware of the situation, however, they should be able to look up the issue in the Knowledge Base.
    There is a service part (PN 661-3692), that should likely be available for future upgrades. At present, the part is constrained, and therefore restricted to exchange only repairs. You may want to contact a service provider or Apple Retail location to inquire on availability as an upgrade part, as it is currently not planned as a DIY (do it yourself) activity and would have to be obtained and installed by one of these service providers.
    G5/2.3 ghz Dual Core   Mac OS X (10.4.3)  

  • Using Airport Extreme Base Station As A Wireless Card?

    Hi,
    I don't know if this is even possible but here's what I'd like to do:
    I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
    Here's my real question:
    I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
    I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
    If this is possible, how can I do it?
    Thank you in advance for any help with this.

    Ernest Lohrer wrote:
    Hi,
    I don't know if this is even possible but here's what I'd like to do:
    I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
    She has an "integrated" modem/router/access point.
    So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
    Here's my real question:
    I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
    I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
    If this is possible, how can I do it?
    Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

  • How Do I Connect An Airport Extreme With Password to another Wireless Devic

    We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
    The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
    If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
    My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

    Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
    Open AirPort Utility.
    Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then click Wireless.
    Choose a password scheme from the Wireless Security pop-up menu.
    Enter the password all users will need in order to join this wireless network.
    AirPort Utility 5.1 Help: Password-protecting your wireless network
    Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
    There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
    There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
    If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
    Follow the procedure above but disable wireless encryption instead of enabling it.

  • Airport Extreme with AT&T Uverse Wireless Gateway

    I have a first generation airport (i think, it is one of the rounded white ones) that i have used for quite some time as my main wireless internet connection. i also have an airport express that i use with the extreme. Recently, we upgraded our at&t internet service to uverse max. We had to be shipped a new "UVerse wireless gateway" that not only works as a modem but also as a wireless router. In the past, we had just connected our modem to our extreme. The issue is that the new wireless router can only have up to ten devices, while we have about 15 wireless devices in our house. also, i am having trouble connecting the airport express that i use with my xbox to the connection. I am wondering what would be the easiest way to just connect the gateway back to the extreme and use that as my wireless connection spot.

    Thanks for the quick reply. I "turned off" DHCP on the Uverse RG by creating an address pool and assigning it to a MAC on a disabled NIC (ATT pushed a firmware update to RG's the removed the "disable DHCP" option).
    I have a Win2K8 Domain server with DNS and DHCP that handles the entire network. I have also disabled the Uverese RG wifi service.
    My RG goes to a Gb switch that then goes to each room in the house. The Set-Top Boxes are connected from the room ports, most of which have additional Gb switches to accommodate gaming systems and other computers with wired connections.
    Up to here, I'm golden.
    The issues start when I introduce wireless. If I use my recently-returned Cisco M20 Valet wireless N router I observe two things:
    1. When I connect LAN port from Wifi to LAN port of home switch---I get a packet storm that consumes 100% of my wireless bandwidth and none of my wireless devices can connect when Uverse is in operation (watching TV/recording). --If no Uverse traffic is going on I can get on the wireless and do things like connect my iPhone to my apple TV via the remote app.
    2: If I connect the home switch to the wifi WAN port, the packet storm goes away completely, but I cannot connect to my apple TV from my iPhone or any other wireless device.
    My Home LAN is 10.10.10.0/24
    My Wifi devices are 192.168.1.0/24 (when WAN port is used--otherwise DHCP is disabled when using LAN ports only)
    I am hoping the AirPort Extreme is capable of either filtering multicast from the wireless traffic or allowing me to use my iPhone to control my Apple TV when my iPhone is on the wireless subnet (192.168.1.0/24) and my apple TV is connected to my wired 10.10.10.0/24 network via the WAN port.

  • Airport extreme with comcast, very slow wireless connection

    well i am creating this new thread becuase after searching this board and trying others' suggestions all day nothing is seeming to improve my wireless speed.
    i have used the extreme base station with other internet providers and the wireless speed was amazing. however, i have just moved and we got the comcast 3-1 deal, so we get internet, cable, and telephone all over the same line. we have 6mb/sec and i did a line test and the speed from comcast was fine. so i think that it must be a setting on the base station.
    i have done a recycle of the power on the network wating about 30-45 minutes inbetween each power on (multiple times). modem, base station, computer. and still there is no improvement.
    i have done hard resests of both the modem and the base station, and still no improvement. i have also done soft resests of both.
    furthermore, i have taken the network security off and that did not improve the speed either.
    but...when i connect to the internet using the lan port of the base station the internet flys.
    what am i doing wrong??? any help would be greatlty appreciated.
    the comcast modem is an Arris telephony modem, i am using a mac book circa oct. 2006, with the airport extreme base station.

    Hello eisnachm. Welcome to the Apple Discussions!
    The only thing that you didn't mention doing was checking for Wi-Fi interference.
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing you from getting a good clean signal.
    I suggest you perform a simple site survey, using utilities like KisMAC, MacStumbler, iStumbler, or IPNetMonitorX to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • I have a Airport Extreme that is dropping the wireless signal alot (several times a day). The green light will go amber but the internet service (ethernet cable) will still be fine. The wireless icon on devices with go away.

    I have a Airport Extreme that is dropping the wireless signal alot (several times a day) The green light will go amber, but the internet service is still ok if your using an ethernet cable directly plugged in. When the light goes amber all devices that is using wireless will lose there wireless icon. The only way to get the green light back is to unplug the Airport device and replug it back in. I tried the reset on the back but still no luck. What is the fix?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Configure an older airport extreme with an ipad1

    I'm a complete noob regarding wireless. I bought an ipad1 and an older aiport extreme (the white round one) off of ebay and am not sure how to get it all up and running. My Mac Pro does not have a wifi card so I can't use that. I plan to connect the airport to my router via ethernet. I've read that you can't configure an airport extreme with the ipad. What do I need to do to set up the extreme so the ipad can see and use it?
    thanks

    If the extreme is already configured, can I edit it using the app?
    Sure, if AirPort Utility recognizes the AirPort Extreme. Otherwise, you have to perform a Factory Default Reset on the Extreme and start over from scratch
    Open AirPort Utility, select the Extreme, and click Manual Setup
    Click the Wireless tab below the row of icons to get to the wireless settings.
    You want Wireless Mode set to "'Create a wireless network"
    Wireless Network Name is your choice
    Radio Mode = Automatic or 802.11b/g
    Channel =Automatic
    Wireless Security = WPA/WPA2 Personal
    Password = Your choice
    Confirm Password
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Update to save settings.

  • How do I Set up airport extreme with existing fios wireles network

    Hello al, l I have an existing wireless network with an arcitonic  wireless router provider with my fios tv. Everything is working well. Now I want to add airport extreme to increase my network range and later add apple tv /net flicks  I,m not great with this stuff. Some wold be great.

    You will need to establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Fios router to the WAN port (circle of dots icon) on the AirPort Extreme and then configure the AriPort Extreme to "Create a wireless network".
    You can configure the AirPort Extreme to provide another separate wireless network if you wish, or if you assign the same wireless network name, and use the same security setting and password that the Fios is using, the Extreme will provide more wireless coverage....and you won't have to change wireless networks to connect to the wireless on the Extreme.
    Follow the guided setup using AirPort Utility to "create a wireless network". The setup will suggest that you configure the AirPort Extreme in Bridge Mode, which would be the correct setting when used with the Fios router.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

  • How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?

    Hello -
    I'm trying to use an Airport Extreme (1st Generation) as a wireless receiver for a Mac Pro but I can't figure out how.  My main modem / wireless router (non-Apple) is upstairs.  My Mac Pro is down stairs.  I'm looking to get internet connection for that Mac Pro downstairs.  Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
    Thanks for the help.
    Nathan

    Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
    Unfortunately, Apple designed their routers to work with other Apple routers. It would be extremely unilikely that the AirPort Exteme could be configured to work with a router from another manufacturer.
    The AirPort Extreme would need to be configured to "Extend a wireless network", but an error message is almost surely to occur when you try this.
    There are other alternatives, but they would involve more hardware. Post back if you are interested.

  • AirPort Extreme with 3T time capsule file security question

    Right now I am using a MacMini with an external HD as a file server.  I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
    With the Mac mini I have fine control over who gets to see and do what to which folders and files.  It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files.  That is extremely insecure. 
    Is my understanding correct?  Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
    - john

    Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
    For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
    For assigning user permissions using accounts, you will need to use the AirPort Utility.
    Run the AirPort Utility
    Select the Extreme, and then, click on Edit.
    Select the Disks tab.
    Select the HDD in the Partitions window.
    Choose "With accounts" as the Secure Shared Disks option.
    Click on the "+" button to add user accounts.
    For each account desired, enter the Account Name, Password, and File Sharing Access type.
    Click Save.
    Click Update to write the new configuration information to the base station and wait for the station to restart.

Maybe you are looking for