Airport extreme with harddrive sharing?

I set up a hard drive to my Airport Extreme through the Airport Utility. So where do I find access to the
harddrive? Shouldn't there be a drive Icon somewhere to access it? Running Lion on Intel Imac.
Thanks

Click here and follow the instructions. The drive must be formatted to FAT32 or Mac OS Extended.
(62033)

Similar Messages

How to configure Airport Extreme AFP disk sharing to host multiple users' home-directories (Lion, using autofs)

I have this working, but only by completely bypassing access control, using guest access with read+write permissions.
Do I need to buy Lion Server, to do this. All my past unix/linux experience says Lion Server should _not_ be necessary.
This seems like a simple & obvious setup objective, but it is proving to be harder than I would imagine.
Setup:
multiple users, sharing two mac mini's running OSX Lion
connected to an Airport Extreme (4th gen) with a USB disk shared (either via disk password, AEBS password, or using AEBS user's passwords).
After much experimentation and web research, I finally have managed to get the mini's to auto mount the Airport Extreme's AFP shared USB disk. Well almost... It only works if, on the Airport, I set the guest access permissions to read+write and select the "Secure Shared Disks" method to "With disk password" or "with Airport Extreme password". In other words, it only works if I essentially bypass/disable access control by using the guest authentication mechanism to the AFP shared disk.
On the Lion side of this, I am automounting the users directories via "autofs". The config files for this are
/etc/auto_master:
# Automounter master map
+auto_master            # Use directory service
/net                    -hosts          -nobrowse,hidefromfinder,nosuid
/home                   auto_home       -nobrowse,hidefromfinder
/Network/Servers        -fstab
/-                      -static
/-                      auto_afp
/etc/auto_afp:
# Automounter AFP master map
# https://discussions.apple.com/thread/3336384?start=0&tstart=0
/afp/users -fstype=afp afp://;AUTH=No%20User%[email protected]/Users/
Then, after rebooting and verifying read+write access to the /afp/users directories, I change each user's home directory: In System Preferences > System > Users & Groups, I right-click over the users to access the Advanced Options, changing the Home directory field to point at the AFP-mounted /afp/users/Users/* home directories.
I experimented with alternate UAM specifications, as well as both OSX and AESB users & passwords. Using guest access is the only thing that has worked.
Any pointers would be appreciated...

Based on lots more experimentation which confirms the information in a parallel discussion (cf. Automount share as non ROOT or SYSTEM user! https://discussions.apple.com/thread/3221944), I have concluded that the Lion 10.7.2 implementation of AutoFS mechanism is broken. I submitted a bug report via apple.com/feedback.
Work arounds..?
Earlier I wondered if installing Lion OSX Server was necessary. The more I contemplate this, the more I am convinced it _should_not_ be necessary. The client-server architecture is clear: my mac's are the file-server client's and the Airport Extreme is supposed to act as the file server. The only thing instaling Lion Server would do (besides enriching Apple.com) is enable me to configure one of the mac's as the file server. This would require it to be "always on" (thus enriching my electric utility as wel). Okay, an additional benefit would be configuring software RAID disks attached to the Lion server, but Time Machine has worked fine for me in the past, backing up to disks mounted on the Airport Extreme.
One solution is to create a disk partition for each user and instruct each user to connect / authenticate to the Airport Extreme AFP share at login. The multiplicity of partitions is necessary since the first user to mount the AFP share, takes ownership of it, blocking other users from accessing that disk partition. A user can "steal" ownership by reconnecting, but this will leave the other user's applications & open files dangling.
This disfunctional situation really *****. Before instaling Lion, I put a 64 GB SSD (solid state disk) in each of our mac's. I did this expecting to easily configure the /Users/* data on external networked storage. I'm having a dejavu "Bill Gates"-ware moment; problems like this were why I abandoned Windoz.
I will make a few more experiments using the depreciated /etc/fstab mechanism. Maybe that will bypass the broken-ness of AutoFS...? Alternately, I guess I could also try to run Kerberos authentication to bypass whatever is broken in AutoFS, but that would require a running a Kerberos daemon somewhere. Possibly I could configure a Kerberos service to run on both my mac's (without installing Apple's Lion Server)...?
Stay tuned...

AirPort Extreme with 3T time capsule file security question

Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- john

Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.

What is the best way to hookup my airport extreme with my time capsule ?

what is the best way to hookup my airport extreme with my time capsule ?

It sounds like you have the AirPort Extreme configured as the "main" router on your network.
If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
Power up the Time Capsule
Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule, then click Manual Setup
Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
Click the Internet icon, the click the Internet tab
Insure that the setting for Connect Using = Ethernet
Insure that the setting for Connection Sharing = Off (Bridge Mode)
Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
Then power cycle the entire network by powering everything off....order of power down does not matter
Wait a minute
Power up the modem first, and let it run a few minutes by itself
Power up the AirPort Extreme next and let it run a full minute
Power up the Time Capsule next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
Open System Preference (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backups or Use Disk and backups should begin again in a few minutes
If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

Airport extreme with time machine

Airport extreme with time machine bought in September 2007 can it be reformatted to use as a back up drive for other than time machine and how. It is 1TB but can only seem to get two disk images of e

Airport extreme with time machine
This sounds like you have a Time Capsule, correct?
can it be reformatted to use as a back up drive for other than time machine
You can place other type of files and folders on the Time Capsule hard drive. No additional formatting is required for this.
and how
Use the Finder to click on the Time Capsule under the SHARED heading on the left side of a Finder window
Click on the Time Capsule icon, then double click on the folder named "Data" (unless you have renamed the drive), and "Data" will mount on the desktop.
You can drag/drop or copy/paste files to "Data" just like any other hard drive
t is 1TB but can only seem to get two disk images of e
The disk images contain all of your backups. Leave them alone.

External Hard Drive on Airport Extreme with a PC

I am trying to setup my Seagate FreeAgent external hard drive through my AirPort Extreme with my PC laptop. The AirPort Utility recognizes the disk, and I have enabled file sharing, but I cannot see the drive on either of my PC laptops that are connected to the network. How do I make the drive visable?

With an AirPort Extreme, the PCs will "see" the HFS+ formatted drive on the network as a FAT32 volume, so there is no need to reformat the drive as FAT32, but the normal limitations of FAT32, like maximum file size of 4 GB, slow transfers, etc. will still apply.

Configure an older airport extreme with an ipad1

I'm a complete noob regarding wireless. I bought an ipad1 and an older aiport extreme (the white round one) off of ebay and am not sure how to get it all up and running. My Mac Pro does not have a wifi card so I can't use that. I plan to connect the airport to my router via ethernet. I've read that you can't configure an airport extreme with the ipad. What do I need to do to set up the extreme so the ipad can see and use it?
thanks

If the extreme is already configured, can I edit it using the app?
Sure, if AirPort Utility recognizes the AirPort Extreme. Otherwise, you have to perform a Factory Default Reset on the Extreme and start over from scratch
Open AirPort Utility, select the Extreme, and click Manual Setup
Click the Wireless tab below the row of icons to get to the wireless settings.
You want Wireless Mode set to "'Create a wireless network"
Wireless Network Name is your choice
Radio Mode = Automatic or 802.11b/g
Channel =Automatic
Wireless Security = WPA/WPA2 Personal
Password = Your choice
Confirm Password
Click the Internet icon
Click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

Which to buy? Time capsule or Airport Extreme with USB drive(s)?

I'm getting either a TC or an Airport Extreme with an external drive.
Archive:
I noticed that TC can archive to an external drive. It seems this can be handy for creating off-site backups. Can I do this with a drive on Airport Extreme (with a powered hub and another drive)? Or do I need to move the drive to a Mac and copy there? Or should I use a network backup instead in either case? I guess this is my main question: Can archive work with Airport Extreme?
Mounting:
Is mounting the Airport Extreme for WiFi range any easier than the TC?
Drive failure:
Is the TC drive likely to fail over the next couple years? And the other way, if the TC breaks, is the drive something I can use elsewhere? I'm a little concerned about having all my eggs in one basket.
Other:
Anything I should be aware of in making this decision?

+Are there any constraints in the orientation of TC that the AirPort Extreme does not have?+
No, not really as long as you give either device plenty of airspace as they both tend to run warm to very warm. I thought mounting the AirPort Extreme might improve the signal strength a bit, but it made no measurable difference for me.
+Is the TC significantly heavier?+
The Extreme is under 2 pounds, the TC comes in a bit over 3 pounds.
+Is mounting on a pegboard bad for the HD?+
I think you may be asking if you can mount it vertically. That's not a problem and the Apple store even sells wall mounts for either device.
+Yikes. I got bad info. I read the "unsupported" constraint was dropped a couple versions ago. I thought all the comments on this were referring to the older versions of AirPort Extreme.+
Here's the Apple document. Nothing changed with Snow Leopard and I saw a specific Snow Leopard document about this...just can't find it at the moment. I'm sure other forum regulars will confirm as well if they see this post.
http://support.apple.com/kb/HT2038
+Is there a list of file servers that Time Machine is compatible with?+
Sorry, I don't have first hand knowledge on that and my policy is to only offer advice on things that I've done myself. That question might be worth a separate post since few people will see this question buried where it is.
Message was edited by: Bob Timmons

Wifi connection AirPort Extreme with IP-camera

I can't establish wifi connection Airport Extreme with IP-camera. At the same time cable connection is fine, but wifi not.
Please, give me an advise.

You need to create a wireless network on the AirPort Extreme, and then you probably will want to assign a compatible static LAN IP address to the camera so that you can port-forward from the router to the camera.

I have a Airport Extreme with a 1TB external HD connected to it. How can I password protect certain files?

I have a Airport Extreme with a 1TB external HD connected to it. I have it set up so my Macbook Pro and PC's in the house can access it. i have some files that i would like to protect(sensitive personal info.). Is there a way that can be done where as certain folders are password protected? Any advice is appreciated. Thanks!

Would a good workaround be to use disk utility to set up a password protected sparse image, of course being connected directly to the Mac, then connect the drive to the Airport Extreme?
Then, couldn't one use that drive and protected files as normal on the airport? It would just require one extra step of using a Mac to set things up first.
I disconnected my Airport so cannot check it out for myself.
Hugh

How can I access HDD on Airport Extreme with iPad

How can I access HDD on Airport Extreme with iPad

Without third-party software I don't think you can. An iPad has no user-accessible interface to a file system. Just what is it you're trying to do?

Airport extreme with harddrive sharing?

Similar Messages

Maybe you are looking for