Airport Extreme with iPod Touch?  But 2 floors of concrete & Brick Walls??

Qwik-Question: Can Airport Extreme penetrate brick and 2 floors of thick concrete to reach my iPod Touch on the upper floor??
_FULL DETAILS:_
Hello! I have been using Macs since 1989 and should be a pro by now-- but things have advanced so much that...
...that I use Apple Discussions regularly!
+OK I have a wired ethernet with a cable modem going to a D-Link Router, going to a switch with a MacBook, G4733 and PBG4-12" (i.e. PB-Helium!)(Loveit) plus 2 ethernet printers-- in my basement office, then nothing on the "ground" floor, but another "switch" on the next floor above (in the US this would be the second floor; but in Europe it would be #1, with Ground Floor "0" and basement "-1").+ On the upper floor is an iMac (2005) and cables to attach other Macs/PC's as needed.
Primarily I want WIRELESS so that my iPod Touch with the January 2008 software update is able to access the www for eM and weather and stocks etc. I've tried this via borrowing a neighbor's WiFi (with his permission) last week-- worked fine! (His PC wireless was located on an upper floor, not the basement!)
Other reasons for going wireless-- (i)using my PB or MB on the "ground" floor (no cable there); and (ii)when my daughter visits-- with her VISTA PC (although we've had problems when she uses a cable in my home network-- VISTA kicks-out the Macs after a while and I have to re-initialize the D-Link Router!!!)
(NOTE: I plan to keep my printers and the current MB / PB / G4733 primarily on the wired network - I assume I can do this, i.e. have both wired and wireless and choose which I want when I want it?)
_AND NOW THE KEY QUESTION IS:_ *WILL THE 2 LAYERS OF CONCRETE AND BRICK IN THIS BELGIAN HOUSE ATTENUATE THE SIGNAL SO MUCH THAT I CANNOT USE WIFI WITH THE ITOUCH FROM THE TOP FLOOR??*
And if so, what is the best solution?
1. Just install an Apple Extreme in basement and pray?
2. Somehow attache the Apple Extreme to the upstairs switch (is that possible??)
3. Someone said that an "airport" may be better for this than an Apple Extreme? Why??
4. Other-- a repeater i.e. Apple Extreme in basement with a "repeater" somewhere (ground floor?)
I really am not sure-- and would be disappointed if I spent $200 (is that the price? Likely more in Europe in Euros!) for an Apple Extreme in the basement and then find the signal is not available on the top floor...
Thanks for any comments, references etc.
Best regards,
Steve Saturday 8 March 2008

...is the iPod Touch 802.11n capable?
No
www.apple.com/ipodtouch/specs.html
What about my May 2006 MacBook?
If it has a "Core Duo" processor the answer is no.
If it has a "Core 2 Duo" processor the answer is yes.

Similar Messages

  • I tried to download a movie on my iPod touch but due to limited space, it did not download.  Then, I checked my credit card online, and I found the money was already taken.  How will I get it to download on another device with the same account?

    I tried to download a movie on my iPod touch but due to limited space, it did not download.  Then, I checked my credit card online, and I found the money was already taken.  How will I get it to download on another device with the same account? Also, I was wondering why they took my money even when it did not finish downloading let alone get downloaded?

    Welcome to the Apple Community.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

  • I have an iPod touch and an iPad4. iTunes lets me work with the iPod Touch but won't show me what's on the iPad. Any ideas?

    I have an iPod Touch and an iPad4. iTunes recognises both items and lets me work with the iPod Touch but won't work with the iPad. In fact iTunes does not respond to clicking on anything in the iPad window even though it knows that it's connected. Any ideas?

    Look her and it may give insite on what is missing. Otherwise:
    Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Repair it yourself if you are up to it
    iPod Touch Repair – iFixit

  • I had an iPod touch, but it was stolen or lost. Now that I have a new one with a new Apple ID, is there someway I can access and download all my old photos and data from my old Apple ID to my new device? I still remember my old Apple ID and password.

    I had an iPod touch, but it was stolen or lost. Now that I have a new one with a new Apple ID, is there someway I can access and download all my old photos and data from my old Apple ID to my new device? I still remember my old Apple ID and password.

    Restopre from backup
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also,
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • I have connected to the wi-fi with my ipod touch but it wotn let me browse safari,app store and itunes

    i have connected to the wi-fi with my ipod touch but it wotn let me browse safari,app store and itunes

    Sounds like it might be something more to do with your network rarther that the iPod its self.
    Try reseting the iPod networking connections by going to:
    Settings > Genreal > Reset > Reset Network Settings
    After this you will need to re-join your wireless network agian
    If this doesent work you could try reseting your wireless router/modem
    Syther101

  • HT4972 I want to upgrade my iOS 4 to 5 on my Ipod Touch but I no longer have the original computer I used to sync with so it keeps saying I will loose all of my apps and stuff on my new computer

    I want to upgrade my iOS 4 to 5 on my Ipod Touch but I no longer have the original computer I used to sync with so it keeps saying I will loose all of my apps and stuff on my new computer..... SO how do I tell it that my new computer is now my regular computer so that I can upgrade my iOS on it without it wiping all of my music, films and apps on it??? HELP please I am desperate to know what to do.

    http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Commercial software utilities for transferring songs from i-device to Mac:
    Senuti - http://www.fadingred.com/senuti/
    Phoneview - http://www.ecamm.com/mac/phoneview/
    MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. What can be done?

    Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?

    follow the steps in this article first
    =http://support.apple.com/kb/HT1451
    after that restore your ipod and resync it
    hope this helps:)

  • HT1351 I'm trying to manually sync all my music to my iPod touch, but whenever I click the sync button it counts to 5 then stops. Is this because I have to check all 3055 songs individually? If so then I'm quitting with apple as a whole....

    I'm trying to manually sync all my music to my iPod touch, but whenever I click the sync button it counts to 5 then stops. Is this because I have to check all 3055 songs individually? If so then I'm quitting with apple as a whole....

    Sync and manually manage are two entirely different things.  You either sync or manually manage.
    Manually manage is drag and drop.
    Sync is when you select what you want and then sync.

  • HT4356 I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    Rufus Cat-
    Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
    I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers.  <iOS: AirPrint 101>  Therefore you need to take another approach.  To start, I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing with your existing setup.
    There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
    Your best option may be to share your computer's printer as AirPrint over WiFi.  Programs that are reported to do that well are Printopia and FingerPrint.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • HT1541 i purchased mission impossible ghost protocol from hmv store with a free digital copy. I have redeemed it on itunes and downloaded it to my ipod touch but no matter what i do I cannot download it to my ipad, any advise please.

    I purchased mission impossible ghost protocol from hmv store with a free digital copy.
    I have redeemed my free copy from itunes.
    I have dowloaded it to my ipod touch, but no matterwhat I do I cannot download it to my ipad2.
    Any advise please?

    I am having a similar problem.  I can't get the digital copy to sync to the ipod touch.  The "Create iPod version" under the Advanced menu is grayed out.  Any other tips?

  • No problem with iMac, MacBook Air, but no joy with iPod touch

    I switched ISP last week, and while I was able to link Mail with a MacBook Air, I hit disaster when I tried to do likewise with iPod Touch. I have my email with one ISP, but the new ISP gives me better broadband, and so I must use their SMTP. At first I had no problem as I inserted the correct Incoming and outgoing settings. Now I can't get past the first step of the new account box. That box throws up a webmail address I never had, and an Stmp I dispensed with last week. When I proceed to insert the correct settings, I get a message that my email service won't work. At my wits end with this. Can anyone help? Please.
    Pat (Dublin)

    Do the incoming and outgoing mail server settings match those of what is shown on your MacBook Air? 
    Have you seen this page?
    http://www.etailor.ie/support/email-support/pop3-and-smtp-settings/
    B-rock

  • Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or  as a Time Machine backup drive.
    Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After  you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
    Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
    Roger

  • My itunes won't reconise my ipod touch but does with my nano any help plz

    my itunes won't reconise my ipod touch but does with my nano any help plz

    - First see if resetting the iPod will make it visible in iTunes so you can restore the iPod.
    - Next see if placing the iPod in recovery mode will make it visible.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I did a factory reset on my ipod touch, but now when i try turning it on it just goes to the apple screen with the loading sign

    i did a factory reset on my ipod touch but now when i try turning it on it just goes to the apple screen with a loading sign, ive let my battery die and tried reconnecting but it still wont work. it doesnt even come up on itunes.

    Why won't it let you sync?  What happens when you try to sync it? Any error messages from iTunes?  How is your iPod configured to sync music from your iTunes library?  In other words, what options do you have selected from under the iPod's Music tab in iTunes?  To access this tab, plug your iPod in, select it under Devices in the left hand pane of iTunes, and over to the right locate and select the Music tab along the top.
    Or are you trying to manually manage your iPod's contents?  In other words, is the Manually manage music and videos option enabled from under the iPod's Summary tab?
    B-rock

Maybe you are looking for

  • Resource Bundle being overwritten

    Hello, We are upgrading from jhs 9.03 to jhs 9.0.4.4. A new feature is resource bundles and that is were we are having problems with. We have two jhs subapplications and I want to use the same resource bundle class for both applications. The problem

  • Tablename for formula tech. name

    Hi Gurus, I created a formula in transformation. I need to know which table have formula informations, means in which table I could see the formula technical name. Thanks Liza Edited by: Liza on Mar 14, 2008 8:59 PM

  • Info on "Redo Entries" and "dirty buffers"

    Hi all, as per my knowledge, dirty buffers will have changed information and the information related to changed data will be stored in redo entries and these redo entries will be stored in archivelog if archivelog is enabled . my question is, what is

  • Where can i watch the live event today (oct. 4th)

    Where can i watch the live event today (oct. 4th)? I knwo it's going on now. All the links i have tried will not open, even in different browsers. Maybe i am trying the wrong ones. Any ideas? -Thanks

  • F help for objects

    Hi all,       can any body tell to get F4 help for object attributes in table controls.   actually i got f4 help for object using SWO_DIALOG_OBJTYPE_VAL_REQUEST. like this i want function module to get f4 help for attributes.