Airport Extreme with Ubee D3.0 - cannot download large files.

Hello all Macoids!
Here is my issue...
I am on Charter Cable Network using Charter's provided modem Ubee D3.0 It is connected to an AirPort Extreme "main base" vie ethernet cable. That AirPort Extreme that I call "main base" distributes the WiFi throughout the apartment to other AirPort devices. And it all works.
However...
I cannot download large files on Wi-Fi using iMac or even while connected to the AirPort Extreme main base via ethernet cable on my MacBook. What is interesting that inside of iTunes I can download large files with TV shows episodes just fine, but the update to an iPhone or an iPad will stop after 10 or 100 megs with error message "Unknown Error 9006" occurred. Interestingly enough, if I will drag the Download window in iTunes around while it is downloading 1.4 gig iOS update file for iPhone 5 - it will complete fine. So it looks like Airport main base (or whichever Mac is used) looses the connection to a download server or Ubee D3.0 modem, unless I constantly "renew" it by dragging the Download window around.
That is quite annoying to do for 15-20 minutes… Same happens on MacBook Pro that is actually connected to an AirPort Extreme main base via ethernet cable...
Macbook running OS 10.9
iMac running OS 10.8.5
Same thing.
I would've call Charter but knowing well they have usually no idea what is up I thought to ask here if anyone has the same problem….?
Any smart suggestions not based on experience?
Anything appreciated very much!

I ended up reformatting with HFS and the problem was solved, sort of. The AEBS can now handle large files. But that allowed me to expose yet another serious firmware bug (version 7.6.1), namely that if you use "account" style fileshares, the fileshares are not reliably accessible anymore, and frequent rebooting of the AEBS is needed to bring them back. A quick test for whether this has happened is just attempt at ten-minute intervals to create a file on a read-write share. You'll find it can work for up to a few hours, but at some point it will fail. Makes the AEBS essentially unusable for account-based fileshares. I
With firmware 7.5, I'd noticed a variation of this problem, which was that editing the fileshare permissions on the AEBS resulted sometimes in a corruption of the fileshare rights. When this happened, you needed to reinitialize the AEBS completely. So I hoped that in 7.6 they fixed the probems. They fixed that one but added the new one.
For now, the workaround seems to be using a device-based password for the fileshares, and forgetting about account-based shares. The huge problem presented by this approach is that all users have full access, so I await Apple's next attempt at stable firmware with great anticipation. If only they had a beta test program, other than their users, we would not be in this near-constant state of working around serious bugs.

Similar Messages

Problem with ipad 2 safari cannot download the file for windows live photo gallery

on ipad 2 safari cannot download the file for windows live photo gallery

What you can download via Safari on the iPad is very limited - you can only download apps from the iTunes app store on your computer to sync to the iPad, or from the App Store app directly on the iPad

Can I replace an older Airport Extreme with a newer one by importing configuration file

Can I import the configuration file from an older Airport base station into a newer replacement Airport base station? It would seem this would save me a lot of extra work. First, it would hopefully save time by automatically configuring the new base station without me having to fiddle with the settings. Second, it might hopefully save some more time if I would not have to re-enter the network parameters for all the devices currrently connected to my Airport (wi-fi) network.
Read on for more details.
My old Apple Airport Extreme Base Station (AEBS) is not a gigabit one. Moreover, it's been experiencing some hardware failures recently. So, I recently purchased a new Apple Airport Extreme (base station) that is a gigabit one (Model# ME918LL/A with 802.11ac Wi-FI). Now, I'd like to replace the older base station with this newer one with the MINIMAL amount of disruption and manual work possible.
Regards,
Tony

I relaced an older AEBS with the new one, recently, and did not need to import anything, but if you can save the configuration file from your old one, then you can import it to the new one. I've never tried that when I switched, and it didn't seem to matter which suggests the configuration file may be on disk somewhere.

After some running time I cannot download large files via any browser.

I am running OS X 10.9.2 on a 27inch iMac 2013 model.
If I keep it running (without sleeping) for some time, perhaps a week, I can no longer download any large files via any browser. It will start and after a very short time go down to 0 B/s, stall there and at the end aboft with an "Unknown network error" or something similar.
Has anyone seen similar problems?

Open router set up using http://192.168.1.1 .....you will see username & password .....leave username blank & in password use admin...............
Click status tab..........check firmware version .......download the latest firmware from http://linksys.com/download ..........
Udate the firmware ....reset the router for 20-30 seconds ........ later on reconfigure the router ........

HT4356 I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

Rufus Cat-
Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers. <iOS: AirPrint 101> Therefore you need to take another approach. To start, I suggest you download the free HP App, ePrint Home & Biz. It has limitations, but should get you printing with your existing setup.
There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
Your best option may be to share your computer's printer as AirPrint over WiFi. Programs that are reported to do that well are Printopia and FingerPrint. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

I have a Airport Extreme with a 1TB external HD connected to it. How can I password protect certain files?

I have a Airport Extreme with a 1TB external HD connected to it. I have it set up so my Macbook Pro and PC's in the house can access it. i have some files that i would like to protect(sensitive personal info.). Is there a way that can be done where as certain folders are password protected? Any advice is appreciated. Thanks!

Would a good workaround be to use disk utility to set up a password protected sparse image, of course being connected directly to the Mac, then connect the drive to the Airport Extreme?
Then, couldn't one use that drive and protected files as normal on the airport? It would just require one extra step of using a Mac to set things up first.
I disconnected my Airport so cannot check it out for myself.
Hugh

External Hard Drive on Airport Extreme with a PC

I am trying to setup my Seagate FreeAgent external hard drive through my AirPort Extreme with my PC laptop. The AirPort Utility recognizes the disk, and I have enabled file sharing, but I cannot see the drive on either of my PC laptops that are connected to the network. How do I make the drive visable?

With an AirPort Extreme, the PCs will "see" the HFS+ formatted drive on the network as a FAT32 volume, so there is no need to reformat the drive as FAT32, but the normal limitations of FAT32, like maximum file size of 4 GB, slow transfers, etc. will still apply.

AirPort Extreme with USB hard drive

Hi...I have an AirPort Extreme with a Maxtor OneTouch 250MB hard drive attached (via USB port). I have two computers which access the internet and the hard drive through the AirPort.
The first computer is a 1.8 GHz PowerPC G5 (with 3GB of SDRAM). The second is a 2 GHz Intel Core2 Duo IMac (with 4GB of SDRAM).
Both computers have full signal strength via AirPort and both computers have no connection/speed issues with the internet. It's when trying to copy to/from the USB disk that there are problems. The older Mac, the G5, has no problems at all. Great copy speeds in both directions, I can even work off of files on the USB disk without a problem.
The iMac, though, has a problem writing to/from the external hard disk. It connects without a problem, but after that, things come to a standstill.
For example, I can copy a 25MB file from the AirDisk to the G5 in about 15 seconds. If I try to copy the same file to the iMac, it takes as long as 5 minutes. I've tried every setting I can in AirPort Utility, including trying each of the channels individually, and nothing helps. I've disconnected the G5 from the network and that didn't make a difference, either.
Other info...the AirPort firmware is updated to version 7.3.2 and both Macs are updated to System 10.5.4.
If anybody has any advice, I will be eternally grateful.

I have a very similar problem. I have a 2.8 GHz iMac with 2GB RAM and am using OS X v10.5.4, and an Airport Extreme (v7.3.2), both updated to latest firmware. I have a 500 GB TrekStor external HD connected to the AEBS via USB. The TrekStor HD was pre-formatted in FAT32 and is visible on my iMac's desktop and in Finder but I cannot transfer files to it or see files on it. When I drag and drop a file on the TrekStor, it sometimes seems to go well but then the file is not visible via Finder, and sometimes I get an "insufficient privileges" message. I repair permissions on the iMac's internal HD without any change. I am logged in as the admin. All assistance is much appreciated!

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141

AirPort Extreme with 3T time capsule file security question

Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- john

Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.

Cannot download pdf files with adobe

I still have the same problem I had a month ago I cannot download pdf file from internet sites screen just goes black
I have recently upgraded software to lion I have the latest adobe software installed still no joy.
Was never a problem in the past on my IMac

In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
If a Finder window opens with that item selected, delete it, then quit and relaunch Safari. Otherwise post again.

Airport Extreme with Ubee D3.0 - cannot download large files.

Similar Messages

Maybe you are looking for