Airport Extreme won't connect to new Vizio TV for internet apps

I have my passwords correct and yet my new Vizio TV says that "Download Not Available" when I try to connect to my wireless Airport Extreme so I can get apps on the TV. It shows my Apple Network number but with a closed lock new to the icon. Trouble shooting says I might need to "disable MAC address filtering in wireless router." Don't know what to do! The airport is set up correctly so I can use my laptop and iPod without trouble. Can anyone help? Thanks.

It shows my Apple Network number but with a closed lock new to the icon.
It sounds like your Vizio TV sees that the Apple network as enabled for wireless encryption ... is it? That is do you have it configured for WPA or WPA2 encryption? If so, you will need to configure the TV to be able to access the network, just like your laptop or iPod.
Trouble shooting says I might need to "disable MAC address filtering in wireless router."
By default, your AirPort Extreme does not have MAC address filtering enabled. Did you configure it for Access Control in the AirPort Utility? If so, you would need to add the MAC address of the wireless adapter used in the Vizio.

Similar Messages

Airport Extreme won't connect with my cable modem (Time Warner)

OK, I'm tired of staring at a blinking amber light. I'm reaching out to anyone out there who's had this problem. I've got everything connected right, the software loaded, the connections set on my laptop (Macbok Pro). But still my Airport Extreme won't connect to the Internet. I've tried different cables, rebooting both my modem and my Airport. For the record, I've had a Mac IT guy from my advertising agency come by my house and make sure that everything's installed and hooked up right. But it still keeps saying that my IP address is invalid, even though I can connect (wired) using the modem.
I suspect I'll just have to take it to the Genius Bar or something. But anybody got any ideas? I really want to join the 'n' generation....
-neil

atotheb, Welcome to the discussion area!
Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

Airport Extreme won't connect to network

I just replaced our old Airport Extreme with a new Airport Extreme. Now our Airport Express won't connect with our network. I've got the dreaded blinking yellow light and the Airport Express does not show up as an icon in my Aiport Utilities application. Any ideas? Thanks.

Whenever changing out networking hardware it is always a good idea to perform a complete power recycle of all of your networking gear to make sure that they are communicating properly. Once you re-established a working baseline between the new Extreme and the modem, we can assist you with the Express if you still have issues getting it to connect.

Airport extreme unable to connect to new router

We just received a new router from our cable company. The old router worked with our airport extreme just fine. After hooking up the new router the airport extreme could not connect to it. I received the following error "error occurred while trying to access the apple wireless device. Make sure your connection is valid Error -6753" So then I tried to power off and reset the Airport extreme. The button was stuck on my reset button. I did figure that out and was able to click the button. But even if I would hear the audible click when i held down the reset button the amber light never flashed rapidly? Not sure what else to do. I have turned off the modem, unplugged the router, plugged them back in. etc. I just don't know where to go from here.
Thanks!
jodi

Were you able to get the AirPort Extreme to reset back to factory default settings, as LaPastenague detailed?
The amber light needs to flash rapidly for about 6-8 seconds during the process to indicate that the reset is taking place correctly. Once you release the reset button, the light will stay solid amber for 15-20 seconds or so, then change to slow blinking amber.
We are a bit confused as well, since in your first post you mention that you received a new router from the cable company, then later in the post, you mention that you have a (separate?) modem.
In the most recent post, you mention that you have a new modem. Is the new router from the cable company the same device as the new modem? Or, do you have a new modem and another new router in addition to the AirPort Extreme?
Can you clarify on exactly what devices that you have? Make and model numbers would help. We know that you have an AirPort A1408.

Airport extreme won't connect via Ethernet to BT homeHub v2.0

Hi
here's what I want to do:
1. Homehub is connected to the phoneline and will provide a b/g network for my iphone/xbox/laptop1
2. I want to connect my airport extreme to this (from what I can tell this must be done through an ethernet cable) so that I can have a separate N network which only 1 laptop will connect to.
So the problem I have is that no matter what options I select in the airport extreme when it's connected via ethernet it tells me that nothing is connected to the Ethernet WAN port. I've tried two different cables different ports on the back of the hub etc. nothing works. Every time I search google or forums for an answer people just write "connected it via ethernet and it works great" but there's no guide to what settings to use that I can see.
Can someone please help me with some sort of noob guide to get this setup how I've stated?
Many thanks in advance

Hey Bob
thanks fro the quick response. I have actually tried exactly that but it still flashes orange at me I'm suspicious that the AE may have a fault because during the setup (i can't remember the exact steps) but I got the AE updated and it complained that it could read from the AE (error code was 10057). Googling this does thow up a couple of solutions which I haven't tried.
so my steps should be:
Factory Reset the AE
setup as join existing network
join via ethernet to create a 2nd network
connect up the cable to the WAN port and the Lan of the Hub
change to bridge mode.
One thing I did notice (which may or may not be related) is the subnet mask on the AE says 255.255.0.0 when I set it up like this. However when I make it just join the network without trying to create a new one (which works) it sets it to 255.255.255.0 . the IP address also begins 192.168.1.* whereas in the other setup mode it is something different. Does that matter at all?
Thanks
Alan

My Airport Extreme won't connect to the internet.

Everytime I try to connect the Modem through the WAN port, the airport utility says there is no internet connection, but when I connect the same ethernet line directly to my macbook it works fine. What's going on and how do I fix it?

Some ISP's won't talk to an Airport extreme unless it's in bridge mode:
http://www.google.com/search?q=Bridge+mode+airport+windstream&ie=utf-8&oe=utf-8& aq=t&rls=org.mozilla:en-US:official&client=firefox-a

Airport extreme won't connect to the internet

I have a replaced New Airport Extreme Gen 4 operating on XP PC (which replaced a previous Airport Extreme). I have configured all settings (so I think) to create a WiFi. The WiFi is created and detected by the PC and iPad3 and both connect. I have had no luck getting onto the internet though. I have a basic ADSL 2+ netgear modem (DM 111 P v2) that connects to the internet fine when the ethernet is directly plug to the PC. I am getting an IP assignment from the network of 0.0.0.1. Which given my limited knowledge is not right. I have reset both modem and Airport by powering down. Next steps I could possibly try?

How do you have your new 802.11n AirPort Extreme Base Station (AEBSn) connected to the the Dell router? ... by wire or wireless? If by wireless, how do you have the AEBSn configured: extend or join?

HT1218 first generation airport extreme won't connect with my iPad2

I have an 'old skool' airport extreme and I can't get it to connect to my ipad2. I get the following message: "The airprort extreme named 'Apple Network ____'cannot be set up by this software. Go to apple.com/support/airport". Any ideas on what I need to do??? My computer recognizes the AirPort Extreme as well as my 1st generation iPad... Any help would be appreciated:)

atotheb, Welcome to the discussion area!
Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

Airport Extreme won't connect

We have had our airport extreme connected to the internet for a year but recently it will no longer send out a signal with out modem. The modem has been checked by several techs who say it's in working order, and will allow internet when plugged directly into the computer. The airport as well has been tested and will work when connected to a different modem. How do I get this thing to start working again with the modem? It sends out a signal that all three of our apple computers pick up but when they open safari it say under network diagnostics that the airport, airport settings, network settings, and ISP are all working but only the internet and the server fail. What should I do? any help would be greatly appreciated! thanks!

Hello Nosylla,
Can you confirm me, the model of your airport extrem base station, the firmware version (-> airport utilities) ?
Have you recently updated your base station to the v5.7 firmware ?
I think i have the same problem like you...!
Sorry for mystakes, i'm a french mac-user

Airport Extreme-won't connect after the latest Apple software update

My iBook will no longer connect to the wi-fi provider at our marina since the last two security updates to 10.3.
The iBook works just fine with all other wi-fi signals in fact pulls in one that's a half mile away! Yet, it will not connect nor show signal strength with this one wi-fi provider. They haven't changed their signal and it occured immediately after I installed the latest software updates.
When I shut down the computer today, for just a moment, a message flashed "should I grant permission to allow the marina wi-fi to connect". But it was gone before I could "click" on the button. Haven't been able to get that message again. I've tried to re-connect via "Other" and keying in the wi-fi system name and password but no luck.
How can I restore my connection to this wi-fi?
Thanks,
iBook G4 Mac OS X (10.3.9) Airport Extreme
iBook G4 Mac OS X (10.3.9)

I had this issue last month after upgrading Quicktime and downloading a security upgrade. For some reason (which Apple couldn't derive), the upgrades for their products screwed up my Keychain, and the only way to fix it was to reset my Keychain. Like you, I run 10.3.9, and this happened with two different upgrades on both my iBook and my iMac.
The reset process is as follows:
Go to Keychain Access in Utilities
Access Keychain First Aid (under Window menu)
Choose Options
Choose "Reset Keychain"
What a pain...I've stopped downloading upgrades from Apple until this gets resolved. Of course, that's not a good "solution" either.
John

Windows XP (SP3) laptop - sees Airport Extreme, won't connect

I am using an older (2003) Toshiba Satellite laptop that is running Windows XP with Service Pack 3. I had been using a Linksys G router and adapter for years with no problem, but we recently upgraded to a Time Capsule for Wireless-N. We're using WPA/WPA2 Personal security. My wife's Macbook Pro connects with no problems at all.
The laptop will connect when the network is unsecured, but it won't connect with WPA security. I see the network under the "Choose a wireless network" choice, I can double-click it, I enter the password, and it then thinks for about a minute. After that, it just stops with no message at all, and I'm still not connected. I updated the drivers to no avail, and the card (Linksys WPC54G) specs say it supports WPA. Any idea what the problem might be?
Thanks!

Hello ChrisLS. Welcome to the Apple Discussions!
Check out the following iFelix article to see if it will help: Problems connecting an XP PC to an Airport Base Station. Although it is written for connecting to an AirPort Base Station, it will apply equally as well for the Time Capsule.

Airport extreme won't connect to the modem

I am having issue with the Airport extreme after update the Airport Utility.
Individually, both Airport extreme and the modem/ router (Belkin) is working fine.
All my Mac system can detect the Airport extreme, but unable to access internet as not internet connection.
Then I connect via the WIFI modem directly, the internet access is fine.
I have reset both units few times, but no luck, checked the firmware, they are all up-to-date.
It seems the Airport extreme is not communicating with the modem.
Does anyone know how to fix it? Many thanks.

the mac address of the old router is probally linked thru a IP lease to your ISP account. You may need to call your ISP and have them release the lease on your IP address. You old router should be turned off when they do this.

Airport Extreme won't connect to hidden WPA network????

I have SSID broadcasting turned off on my ATT modem/wireless router so my network is hidden from my neighbors, but now my AEX won't join the network. No matter how many times I put in the network name and WPA pass, when the AEX reboots it has flashing amber and status is "...set up to join a specific wireless network that can't be found."
Can't be found? That's funny because 2 macs, a PC, an iPhone and a TiVo all found it just fine. What gives?
I want to have my AEX broadcast Airtunes to my Airport Express, and apparently the only way to do it is connect the AEX to the ATT router and then blah blah blah
Yes, I've triple checked that I'm entering the network name and WPA pass correctly. No love. Help! Thanks.

Thanks for your ongoing help, really appreciate it.
That's what I thought too. Unfortunately it doesn't appear to be the case. My mac is connected to the network via an ethernet cable to the ATT router. The Express is connected to the network via the wireless network created by the ATT router. But my mac apparently can't communicate with the Express unless the mac and the express are both on the wireless network at the same time.
In other words, if I put my mac and the express on the wireless network being created by the ATT router airtunes works. But as soon as I turn off the airport on my mac (so it's now connected to the network via ethernet only) airtunes stops working.
I was hoping to get airtunes to work without having to connect my mac to the wireless network at all. I prefer to do the mac via ethernet since it's marginally faster and more reliable. Oh well, I guess I can just turn the airport on my mac on whenever I want to listen to music on the stereo via the mac.

My brand new out the box airport extreme won't let anything connect to it.

My brand new out the box 5th gen (2013) airport extreme won't let anything connect to it. I've tried several setups from sratch by the book. multiple resets and restores still nothing. It just keeps telling mt that the password is in correct even though it is 100% right.
My curren set up is as follows. Phone Line -> ADSL2+ router -> Airport extreme. There is also an old airport express running of the router, this was done because the airport extremem was failing to work.
Trying to connect:
2x iPhone 4s
2x macbook air
2x Mac Pro.

You will want the Extreme to be in bridge mode if it is currently disabled. (see image below)
This will allow the ADSL2+ router to perform two important functions for your entire network: 1) Provide both the DHCP & NAT services, and 2) Provide PPPoE support to allow access to your ADSL ISPs network.
If the Extreme is left in its default state, a router, it will conflict with the first item and you will have want is known as a "double NAT" condition. Something you will want to avoid.

Airport Express won't connect to Extreme by ethernet

Hi,
Here is my setup:
a) Airport Extreme (802.11n 2nd gen) connected by ethernet to cable modem
b) Airport Express #1 setup to wirelessly extend network
This has worked fine for quite some time.
Now, what I tried to is add a 2nd Airport Express via ethernet, so
the new setup is:
1) cable modem via ethernet to Airport Extreme
2) ethernet connection from Airport Extreme to D-Link 8 port gigabit switch
3) ethernet from switch to several devices (Tivo, GoogleTV,etc) and also to an in-wall ethernet connection to another part of my house
4) ethernet from that in-wall ethernet to another D-Link switch
5) ethernet from that other switch to printer (currently works fine) and to Airport Express #2
6) Airport Express #1 still connected wirelessly
Problem: Airport Express #2 will not connect. Won't show up in Airport Utility. Nothing.
I have tried several factory resets.
After many tries, I finally tried connecting it wirelessly. This worked, and I was able to see AEX#2 in the Airport Utility. But, when I then tried to connect it by ethernet, it shut down my entire network. I can not anywhere find step by step instructions on how to connect the AEX by ethernet to the Extreme.
I have reviewed http://support.apple.com/kb/HT4145 but find no help there.
Looking forward to some great help.
- Blue

If I switch Express#2 (the one I would lilke to connect by ethernet) to "create" a network, with the same SSID and PW, then I can only see Express#2 in the utility and the Extreme and Express#1 dissappear.
As soon as you set the Express #2 to "Create a wireless network, the setting for Connection Sharing will change from Bridge Mode to Share a public IP address. That is likely what is throwing you off.
Setup Express #2 to "Create a wireless network" using the same wireless network name, same wireless security and same password.
The next...and last....and critical....step before you click Update must be to change the setting for Connection Sharing from Share a public IP address to Off (Bridge Mode).
Now click Update and wait for a green light on Express #2.
Then, you have to power cycle the entire network.
Power off everything in any order you want.
Wait a minute
Start the modem first and let it run a minute
Start the AirPort Extreme next the same way
Then the switch, etc.
You get the idea....keep starting devices one at a time until the entire network is back up.
Now all the AirPorts will be on the same subnet and visible in AirPort Utility.

Airport Extreme won't connect to new Vizio TV for internet apps

Similar Messages

Maybe you are looking for