Airport Extreme works fine with ibook and wireless PC on WPA, but not Wii

Hi;
I just got an Airport Extreme last week. Took me a while to get everything figured out, but I got my ibook as well as my wife's ibook and her PC to connect wirelessly, using WPA encryption. We have a TiVo (using the "official" TiVo USB transceiver)and a Nintendo Wii that I can't get to connect though. Both see the network and try to connect, but after a connection attempt they come back with an error message that the network can't be found.
When I change to WEP encryption, the connections work just fine. I really want to stick with WPA, though, as there are a bunch of wireless networks around me and I obviously don't want anyone else to connect to my network. Any thoughts or ideas? Thanks in advance.

At first we could plug the Dell in directly but that was before setting up the AX. Now that the AX works the Dell cannnot connect even wired. (It says that it's connected but it cannot find server when you try to open a webpage). Could this be a problem that the moden cannot go between Mac & windows?
Most modems tend to "remember" the last device connected to it, so it's important to do a complete power-down/power-up when switching devices. It's possible that your modem did this when you attempted to connect the PC directly. My purpose of having you connect the PC directly was to verify that it can access the Internet with a wired connection and that it's wireless setting needs to be troubleshot further.
The power recycle process should be something like the following:
- Power-off the modem & AX; If possible, leave the modem off overnight.
- Power-on the modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.

Similar Messages

Airport Express works fine with iBook but isn't seen by Dell laptop

I have an Airport Express connected to the internet which is automatically recognized by my iBook & works fine. My roomate has a dell laptop running Windows XP and it doesn't recognize the network. In other words usually when the wireless card recognizes a network it pops up in the taskbar and it isn't with the airport. Any suggestions would be appreciated.
iBook Mac OS X (10.3.9)

At first we could plug the Dell in directly but that was before setting up the AX. Now that the AX works the Dell cannnot connect even wired. (It says that it's connected but it cannot find server when you try to open a webpage). Could this be a problem that the moden cannot go between Mac & windows?
Most modems tend to "remember" the last device connected to it, so it's important to do a complete power-down/power-up when switching devices. It's possible that your modem did this when you attempted to connect the PC directly. My purpose of having you connect the PC directly was to verify that it can access the Internet with a wired connection and that it's wireless setting needs to be troubleshot further.
The power recycle process should be something like the following:
- Power-off the modem & AX; If possible, leave the modem off overnight.
- Power-on the modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.

New Airport Extreme works fine with everything except my husband's Toshiba running Windows 7

I have no idea how to fix this problem. He scanned his computer (Windows 7) for viruses, and nothing came back. He deleted our home network from his laptop, then added it back.
His computer shows that he has "limited access" to our home network and NO internet access. It also shows he has four bars, so he has a good signal. Four other people in the house using macs, ipods, ipads, and kindle fires aren't having an issues.
Is the problem with his laptop or with my new Airport Extreme? We upgraded from a very old version (I think it was the 1st one), he never had a problem with the old Airport Extreme. He actually didn't have a problem with the new one until about a week after I had it up, which makes me think the problem is with his computer?
His Toshiba has no problem connecting to his Verizon mifi.
Could someone please offer me some advice?

I think I may have solved my own problem. I read somewhere online that he needs to hit his "F2" button. He hit it and his computer hooked right up to our network. Previously, we would have to restart Airport Extreme and his computer so he could connect. Even doing that the connection would last between five minutes and two days.
Very strange. Hopefully problem solved. Time will tell.

Airport Extreme works fine but I can't see it in Airport Utility

Have seen numerous posts on this issue but no solutions!
I have a MB Pro running 10.4.11, Airport Extreme and Airport Utility 5.2.1. The Airport Extreme works perfectly, with no connection issues, but I cannot see it anymore in Airport Utility. I have another Airport Express hooked up to my stereo (for airtunes only), and can see this in Airport Utility, but not the Extreme. The Extreme used to appear here, but no more. Otherwise works fine. Just need to be able to reconfigure it.
Anyone know what the fix is????

I have this same issue. Internet works, I can connect to it, but i doesn't show in the Airport Utility. Also, it doesn't let me connect to other computers or my AirDIsk. I am using 10.5. Unplug and plugin style reset fixes it...for a while. Any ideas anyone?

Does Airport Extreme work will with AT

Does Airport Extreme work will with AT&T Microcell for the iPhone 4?

The AT&T Microcell will plug into one of the Ethernet ports on your AirPort Extreme.
The AirPort Extreme will work just fine. Whether the Microcell works well is totally up to AT&T.

Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes?

Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes? Other photos taken with same camera sync fine from iPhoto while certain events are inexplicably incompatible. I've recently foundvthecsame occurrence with certain mp3s and videos from iTunes.

For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
The iPad's supported audio formats are :
HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Airport Extreme MAC filtering with iBook G4

Hi,
I recently set up an Airpot Extreme Base Station with my PowerBook G4 and an iBook G4. I like using MAC filtering and setting up a list of specific MAC addresses that can have access to the network. This works fine with my PowerBook and old iMac [through ethernet]. It works initially with the iBook, but when the iBook is restarted, or when it has to reconnect to AEBS for any reason, it only partially connects. It gets full signal, but is not able to connect to internet. Yellow light in network prefs saying it has self assigned IP address but connect access internet. Is there some way to get it to always access without having to constantly reassign it's MAC address on the AEBS and then reboot the AEBS? It seems to work fine when not using any MAC filtering security. But I want it. Any ideas? Many thanks.

sorry wrong forum.

I am using window.print() to print the data of my webpage, it prints only first page and left the remaining while it works fine with IE and Google Chrome, ie print all the pages.

My Page has data more than one page, it has verticle scroll bar to view all data .
I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
This works fine with Internet Explorer 6+ and Google Chrome.

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu

I can't install Java in Firefox. Intead Java works fine with IE. I preffer Firefox 4 but...I'm running Win 7 64-bit.

I;m running win7 64-bit and I can;t install Java in Firefox 4. Java works fine with IE.

On Java, I think we've covered the basics. There are a couple of other articles that might help:
[http://support.mozilla.com/en-US/kb/Java-related%20issues Java-related issues | Troubleshooting | Firefox Help]
[http://kb.mozillazine.org/Plugin_scanning Plugin scanning - MozillaZine Knowledge Base] (you would want to make sure it is ''not'' disabled; in about:config, filter on plugin.scan and see whether anything has been changed from its default)
On Norton, there are a number of recent threads here, but I have not been reading them. Hopefully someone has posted the answer.

Setting up airport extreme base station with Mac and PC

I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

Airport Extreme worked for 2 days and now wont

3 days ago I wasted $600 on an Airport Extreme, 500Gb external drive, and the family pack of leopard excepting to use time machine with the shared airport disk. I quickly realized that wont work, maybe they'll fix it one day. What really ***** though is that my wireless connection was working perfectly for 2 days and then just died. Last night i boot up my macbook and get the network not found message. I entered my info manually and got it to connect, but it was extremely slow loading my homepage and then the connection simply stopped working. This is happening on both my brand new black macbook with leopard installed, and my fairly new white macbook that is still running tiger. I've reset the airport a few times and still the same results.
Did i get a defective router? I think i can still return it under apple's (supposed) return policy, should i just return it and go back to my reliable linksys g band router?
Thanks in advance.

Yes, following your advice i opened up the iMac and made sure it was well in place. It deem seem a little loose, but, it was still in the socket. After trying this, it still does not pick up the signal.
Any other ideas?
It just seemed to stop working , all of a sudden, !
I have noticed other people with similar problems,,
Thanks for any advice you can give me
Lara

Airport Extreme works fine. Cannot see two Airport express units

Hello. I just bought a new Airport Extreme and 2 Airport express units to replace my old linksys routers and to take advantage of my new MacBook Pro and iTV units. I am a Mac newbie after 20 years of PC's. The Netgear DGND3300 DSL modem feeds DSL signal to the Airport Extreme unit and it works well with good internet and signal. I am trying to use the 2 Airport Express units to extend the signal around the house. The Airport Utility has seen both of them but then they disappear and it cant find them again. They are 10 feet away for now until I get them configured. How do I get them to connect and how do I configure them to extend the wifi range?
Thank you.

The first thing to check is your AirPort Extreme.
Open AirPort Utility - click Manual Setup
Click the Wireless tab/label below the row of icons
Make sure there is a check mark next to "Allow this network to be extended"
Update to save changes
You may have already done this, but it was not mentioned in your post and is a critical step to "extend" the network.
"Hard Reset" each of the AirPort Express devices by holding in the reset button for 10-12 seconds. Then power down one device and configure one at a time.
Open AirPort Utility - Click Manual Setup
Click the Base Station tab/label below the icons
Enter a name for the device, device password and adjust Time Zone settings
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Check mark next to Allow Wireless Clients
Wireless Security = Same security setting as the AirPort Extreme network
Wireless Password = Same password as the AirPort Extreme network
Confirm Password
Update to save settings. Close AirPort Utility immediately as soon as you see the message that the settings have been stored. You should have a green light on the Express in 40-45 seconds.
Now, log back on to the wireless network provided by the AirPort Extreme and you should see the AirPort Express that you just configured, if you are using a Mac. The Windows Firewall or anti-virus software may block the connection if you are using a PC. (The AirPort Express "disappears" as soon as you click Update in AirPort Utility because it has joined another network...that's why you don't see it. It uses a "temporary" network with a name like Apple Network xxxxxs during the configuration only).
Configure the second AirPort Express the same as the first. You will probably want to assign a different device name to that Express to keep things straight.
To "extend" effectively, the Express should be located approximately 1/2 the distance between the AirPort Extreme and the area that needs more wireless coverage. Depending on obstructions, you may need to alter this distance a bit.
The "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme is the "hub" and each Express resides at the end of a "spoke". Each Express communicates directly to the "hub", not to another Express at the end of another spoke. For that reason, you cannot "extend" a device that is already configured to "extend".
Message was edited by: Bob Timmons

Airport Express works fine with non-Apple products???

I've owned my Airport Express for 2 years now and never a problem until this morning. Now, the airport express is powered on, green light and all, connected to cable modem, but my Early 2008 Macbook Pro and iPhone 4 will not connect to it. Funny though, because it shows up in my list of networks on both devices. When I try to select it from the list (of course it used to connect automatically, now it doesn't connect at all), neither the MBP nor the iPhone can establish a connection with it. Sometimes the iPhone asks for a password, even though the password hasn't changed and it is stored in the device. It should also be noted that both the iPhone 4 and MBP can still see and connect to my neighbors' wireless routers within range.
Now for the really weird part: the Airport Express still connects to and performs at 100% with other devices, including 1) my Dell running Windows Vista, 2) my XBox 360, 3) HTC Thunderbolt phone, and 4) a Sony Blu Ray player with wireless internet capabilities. I have power cycled all of the equipment at least 5 times, and all of the non-Apple devices continue to connect to the Airport Express just fine, while the iPhone 4 and MBP cannot connect. I have even installed Airport Utility on the Dell and did a full factory reset of the Airport Express, but that didn't fix the problem either.
What is going on here?

At first we could plug the Dell in directly but that was before setting up the AX. Now that the AX works the Dell cannnot connect even wired. (It says that it's connected but it cannot find server when you try to open a webpage). Could this be a problem that the moden cannot go between Mac & windows?
Most modems tend to "remember" the last device connected to it, so it's important to do a complete power-down/power-up when switching devices. It's possible that your modem did this when you attempted to connect the PC directly. My purpose of having you connect the PC directly was to verify that it can access the Internet with a wired connection and that it's wireless setting needs to be troubleshot further.
The power recycle process should be something like the following:
- Power-off the modem & AX; If possible, leave the modem off overnight.
- Power-on the modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.

Airport Extreme works fine with ibook and wireless PC on WPA, but not Wii

Similar Messages

Maybe you are looking for