AirPort Extreme works with my Mac, but not my PSP?

Just got a new AirPort Extreme today, and I had difficulty setting up because i had typed something wrong. I fixed it and was excited to see that my homepage appeared on my computer, then I tired connecting with my PSP, and it found the signal then gave me a message that that it couldn't connect with the IP. The type of encryption was supported, and the code for the security was correct, but I still cannot figure out why it won't work.
I successfully hooked up the signal, not the ethernet, through the Mac OS X system, and the Windows Vista Ultimate system which is installed through Bootcamp. I cannot figure out why, though, that the PSP won't connect.
Please help or explain what I might be doing wrong!!!!

On your Mac, open the Airport Utility.
Select the airport base station from the list, go to manual setup.
From menu select, Base Station > Equivalent Network Password
Now copy copy password onto the Windoz PC.

Similar Messages

Airport Express works with my Mac but not XP Pro

Hello I have an Airport Express that I set up and use with my G4 laptop flawlessly.
My Problem is trying to get my PC, running XP Pro, to play-nice with the Airport Express.
The nutty thing is that this set up was working perfectly for months and then quit for some reason. Anyway, the I use WEP encryption and I have the same passwords set for both computers. Now, the PC sees the AE and is apparently able to connect with it but gives the alert that it has only limited connectivity and functionality with the network. Strange...
Now, as far as I can tell there are two passwords to the AE. One is the Base Station password and the other one is for the encryption. The PC never seems to ask for the Base Station password which seems odd. As I said before, this worked well at one time (with WEP) so I don't know what's going on. I also obviously don't know XP at all so I apologize. Any advice is greatly appreciated. Thanks very much.
-B

Thanks for the link. I have set the AE to use WPA encryption using a 13 character plain-text network key password. I'm led to believe that this would be a palateable password for both the Mac and PC...of course this doesn't fix things. I should know that simply entering the same network key on both computers would not work. That would be too easy... Well now, in XP under Network Properties it only offers WEP or None for Data Encryption. This is weird right? Thanks a lot for all your help.
-B

HT4587 My airport express works on my mac but not I pad or I phone which has been updated to ios7. Ideas?

express works on my mac but not I pad or I phone which has been updated to ios7. Ideas?

You do know that the controls for AirPlay have been moved in iOS7, correct?
Is that what you are asking about here? If yes, you might want to read up a bit on the changes in iOS7.
Apple - iOS 7 - What's New
If you are asking about something else, we need more details about the issues.

Airport/TC working with MacBook Pro but not with my Mac Pro???

Hi all,
I've got a Time Capsule connected to a Westell Modem through AT&T. Needless to say; I've had a lot of issues with my setup but this one has my stumped.
After my network crashed a few days ago, I reset everything and got my Airport network running on my laptop. I cannot get it to work on my Mac Pro. My MP doesn't even see the Time Capsule when I run Airport Utility. It'll show the network on the Airport Icon at the top of the page and will even let me choose it when picking a network to connect to.
Anyone know what to do, please help!!!
Thanks!!!
Chris

On the Mac that won't connect using wireless:
Open System Preferences and click on Network
Click the Airport connection on the left
Click the Advanced button on the lower right
Look for the name of your wireless network and delete it using the - (minus) button at the bottom of the connection list. Delete any other networks that you do not need as well
Apply changes
Open Hard Drive > Applications > Utilities > KeyChain Access
Under the Kind column, look for any listings of Airport Network Password and delete them
Restart your computer
Keep your Mac close to the TC for now and click the AirPort icon at the top of the screen and try to log on to your wireless network.

Airport express works with windows xp but not OS Tiger

Hi all
I’m a troubled man.
I have recently bought a new Mac pro along with an airport express. I am a first time user of Mac’s.
Here is my problem.
I use a DSL modem and my airport express is connected with the LED indicator in solid green. When I try to connect using my user name and password the “searching for POPPE sever appears at the top of my screen.” And after a few seconds “could not find POPPE server. This happens all the time. I tried to get air tunes working but itunes could not detect my airport express.
Now since I’m an engineer I needed to run auto cad on my Mac so I downloaded Bootcamp, partitioned my Macpro hard drive and installed windows XP on my Mac book pro and to my surprise windows xp found my airport and connected to the server straight away. So I experimented and download the xp version of itunes and what do you know the xp version of itunes detected my airport express and everthing worked fine for Windows! This suggests to me that the problem lies with the mac software as the airport express is working fine. Whats going on! I do not understand.
When I go back to tiger it sees my airport but cannot connect. I run the airport assistant but it cannot detect my airport. I run the utility airport program but it cannot see my airport express. I go back to windows XP everything works fine???????
If you can come up with a solution to this strange problem I would be very grateful.
Thanks

The user name and password may be just fine but the dialer software for OS X may be quirky to the point where it doesn't work with your modem through an Airport connection. My recommendation is to try uninstalling the DSL dialing software from the computer and setting up the Express to do the dialing for you. Your computer connection then becomes straight Ethernet.
If that doesn't work, have you checked to see if there's a newer version of the OS X dialing software available?

Airport extreme working on some devices but not others

All of a sudden airport extreme has stopped working on some of our devices. within our family we have an old macbook pro running tiger, a 2nd gen macbook air running snow leopord, a black macbook running lion, a mac mini running lion, two iphone 4s and an iphone 3g. the wireless only works on the two computers running lion. nobody has changed any of the settings on the airport extreme. it is running the latest version and has been working fine up until a couple of days ago. i have reset the modem and router several times each but nothing has helped. when we try to connect the iphones to the wireless they say unable to join network and the computers running snow leopord or older say there was a problem connecting to the network or something similar to that. any help would be appreciated!

I know that you have reset both the modem and AirPort already, but I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL, but recommended) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Using Kodak AiO 5500 over Airport Express- works on my Mac, but not on PC

The subject says it all, folks. Just got a new Airport Express 802.11n and hooked up both printers (Samsung ML-1740 and Kodak AiO 5500) with a powered USB hub. Both printers are visible in Airport Utility (and Bonjour Printer Services in Windows).
I'm running OS 10.6.3 on a MacBook Pro, 15" 2.4GHz Core2Duo system. On this system I can use both the Kodak and Samsung, no problem. But then on both of my parents' PCs only the Samsung printer works, although I can see both using Airport Utility and Bonjour Printer Service.
What the heck is going on??
Thanks in advance!

I would perform the following steps for testing:
1. Disconnect the Samsung printer, so that just the Kodak printer is connected.
2. Disable the firewall at the Windows machine (the Windows one and all third party)
If that's successfull, you can
3. Re-enable the firewall and you probably need to allow traffic on port 9100 (not 100% sure about the exact port)
4. Re-connect the Samsung printer

Airport Express works with Bose radio, but not with my amp. Why?

Hello everyone.
I have a Bose Wave Radio that's about 10 years old. I'm able to connect it to my Airport Express via the 3.5mm jack/ RCA (red/white) cable.
I can stream Airtunes (from my Macbook Pro) into it fine, with normal functionality and volume control, including using Apple Remote on my iPhone 4.
Now the problem:
When I take that same red/white RCA cable (while it's streaming good music to the Bose), unplug it, and plug it into my amp (an old Kenwood), I can hear the music, but just barely. Even with all volume sliders all the way up, and the amp volume near max, the music is barely audible.
I've tried hard reset on the Express, and I've tried every possible RCA and speaker connection on the back of my amp.
Why does the Bose work normally, but my nice amp produces barely audible sound?
Is there a fix for this?
Thanks!

Based on the information in your post, you know two important things:
1) The AirPort Express is operating correctly
2) The cable/adapter that you are using is working correctly as well
So, the problem is with your amplifier. You don't have the Tape Monitor button pushed in, do you?
Have you checked the amplifer with other audio sources and cables? If you have an iPhone, iPod or any other similar audio device with an audio output jack, give that a try and see if you get the same results. If you do, this again confirms that the problem is with your amplifier, not the AirPort Express or your audio cable.

Airport router works with my Mac but my roommate can't connect on her PC

Hey all. On my MacBookPro I am able to connect to my Airport wireless router. We have a WEP password (11 characters) on the locked network. I set the network up years ago and have had no problems accessing it on my Mac. My new roommate has a PC, and she is not able to get onto the network. She gets the following error message: "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters."
Ideas? Thanks!

On your Mac, open the Airport Utility.
Select the airport base station from the list, go to manual setup.
From menu select, Base Station > Equivalent Network Password
Now copy copy password onto the Windoz PC.

Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

You can setup an Airport device using the Apple Airport Utility for iPhone
Download it for free in the App Store on your iPhone...
It's under "Utilities" and the "Top Free" utilities.

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

YEAY!
I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
On my Mac, it was in ~/Documents/Digital Editions
Import it, and drag it to your Reader.
The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
Worked like a charm.

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My apple id password only works on my mac but not on my iPhone or iPad

my apple id password only works on my mac but not on my iPhone or iPad what do i do?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

Does Airport Extreme works with Lenovo ThinkPad(L420), Does Airport Extreme works with Lenovo ThinkPad(L420)

Does Airport Extreme works with Lenovo ThinkPad(L420), Does Airport Extreme works with Lenovo ThinkPad(L420)

The AirPort Extreme fully implements the IEEE 802.11 wireless protocols for a through n and will work with any computer that uses a compliant version of any of those protocols. So, yes it will work with the Lenovo as long as the Lenovo is not doing something strange with wireless.

AirPort Extreme works with my Mac, but not my PSP?

Similar Messages

Maybe you are looking for