Airport faillure
After a sleeping session airport needs to be restarted
If you have set up the AirPort Extreme again and the amber light is flashing......AirPort Utility will tell you why.
Open AirPort Utility
Click on the AirPort Extreme icon
Look for the setting for Status
Click on the amber dot there
What does the message say?
Similar Messages
-
Airport Port Mapping problems...
I have an AIRPORT EXTREME firmware 7.6.1. I'm trying to get it to open port 443 in port mapping and it says it's open and when I port scan it's not. Am I missing something? Please see the enclosed image...
Hello ,
I have the same troubles got the latetest updates on AE en soft 6.0
i cant get my ports open !
it realy s...cks !!
i spend alreddy more dan 3 days to get it working , whit no results !!
i have 3 foscam Ip cams who doenst work anymore outside my LAN !
i tried to get it work whit 5.6 but than i got huge faillure on my AE drops out and need hard reset !
I hope ther are some techies from apple who can solve this troubles !
HELP HELP HELP HELP HELP
why do the change someting that works before fine !
before the updates everthing works fine
the big boss i passed away Rip
and the house is collapsing ! -
Airport can no longer read or write the configuration of Time Capsule
I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.
-
How do I use my airport extreme with my FIOS router?
How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.
Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."
-
Forgot password to access my Airport Time Capsule, can't restore Time Machine backup
It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes. -
Preface:
This is my second new AEBS in two weeks. They've both had this issue (which seems unique from the other disconnect postings I've found), so it's not AEBS hardware. I've also had a perfectly functioning Airport Express in the exact same configuration (sans dual-band of course) for the last two years, so interference and the like (for which I did test and troubleshoot) also seems unlikely. I have a 2008 Macbook, a mid 2009 Macbook Pro, a Windows 7 PC, an iPhone 4, and iPhone 4s, and an iPad on the network.
Issue:
After setting up my AEBS, I kept getting knocked off at random, frequent intervals. It would disappear from all my devices simultaneously--no network connections and nothing showing in Airport Utility. I tweaked every setting imaginable five times over. No luck. Looked into networks around me and fiddled with channels etc. No luck. At first, I would have to go unplug and replug the AEBS to get it to show back up. Eventually I managed to get it to where it would just "reset" more or less and come back on in about 30-45 seconds. The light on the router will blink green once, and then two seconds later go solid amber for about 10-15 seconds, and then blink amber for another 10 or so. Then it's back like nothing happened.
I think that I finally narrowed it down today to what is triggering it more or less. I noticed it was fine with everything connected WITHOUT any security. When I added the WPA2 security back on, it was doing it soon after the older Macbook connected, right after "Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5". I could connect the Macbook through ethernet and be fine. If it did connect without the issue, it would do it soon after when the router would run that "Installed unicast CCMP" process again in a mere matter of minutes.
I decided that maybe having old OSX Leopard wasn't working well, so I finally upgraded it to Snow Leopard to see if maybe it would help. No luck. Exact same issue. I disabled Airport on it, and since then I'm going on 5 hours of no issues, but why is this computer causing the AEBS to freak out when it worked 100% with my Airport Express for years???
Here's a sample log, starting from one reset to a disconnect:
Dec 07 11:39:30 Severity:5 Initialized (firmware 7.6).
Dec 07 11:39:37 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Dec 07 11:39:37 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Dec 07 11:39:37 Severity:5 Rotated CCMP group key.
Dec 07 11:39:38 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Dec 07 11:39:38 Severity:5 Rotated CCMP group key.
Dec 07 11:39:41 Severity:5 Associated with station 00:1b:63:00:46:94
Dec 07 11:39:41 Severity:5 Installed unicast CCMP key for supplicant 00:1b:63:00:46:94
Dec 07 11:39:41 Severity:5 Internet configuration leased [IPv4] -- host <76.183.234.251/255.255.252.0> gateway <76.183.232.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43199> domain <tx.rr.com>
Dec 07 11:39:42 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
Dec 07 11:39:43 Severity:5 (WAN) link state is Up.
Dec 07 11:39:43 Severity:5 Internet configuration leased [IPv4] -- host <76.183.234.251/255.255.252.0> gateway <76.183.232.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43197> domain <tx.rr.com>
Dec 07 11:39:48 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60946.
Dec 07 11:39:49 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60947.
Dec 07 11:39:57 Severity:5 Associated with station 3c:d0:f8:8e:31:b5
Dec 07 11:39:57 Severity:5 Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5
Dec 07 11:39:58 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60949.
Dec 07 11:39:59 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60950.
Dec 07 11:39:59 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60951.
Dec 07 11:40:14 Severity:5 Associated with station 00:18:e7:83:45:ed
Dec 07 11:40:14 Severity:5 Installed unicast CCMP key for supplicant 00:18:e7:83:45:ed
Dec 07 11:40:29 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Dec 07 11:40:29 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Dec 07 11:40:35 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60954.
Dec 07 11:40:35 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60955.
Dec 07 11:40:36 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60956.
Dec 07 11:40:44 Severity:5 Associated with station a4:67:06:60:67:41
Dec 07 11:40:44 Severity:5 Associated with station 00:26:bb:00:cc:a2
Dec 07 11:40:49 Severity:5 Associated with station 3c:d0:f8:8e:31:b5
Dec 07 11:42:14 Severity:5 Associated with station 00:1b:63:00:46:94
Dec 07 11:43:39 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Dec 07 11:43:39 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Dec 07 11:43:39 Severity:5 Rotated CCMP group key.
Dec 07 11:43:41 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60962.
Dec 07 11:43:45 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60964.
Dec 07 11:43:45 Severity:5 Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60963.
Dec 07 11:43:48 Severity:5 Associated with station 00:18:e7:83:45:ed
Dec 07 11:43:48 Severity:5 Installed unicast CCMP key for supplicant 00:18:e7:83:45:ed
Dec 07 11:44:24 Severity:5 Associated with station 00:26:bb:00:cc:a2
Dec 07 11:44:24 Severity:5 Installed unicast CCMP key for supplicant 00:26:bb:00:cc:a2
Dec 07 11:44:40 Severity:5 Associated with station 3c:d0:f8:8e:31:b5
Dec 07 11:44:40 Severity:5 Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5Hi,
I have roughly the same issue. I have a new 5th Generation (I had a 4th Generation that seemed to do the same thing) that will reboot for no apparant reason. I have a 1st Generation Time Capsule as the main wireless access point, then a 2nd generation Extreme extending, and the 5th generation as another extension. I also have an Express extending to the top floor. All my other devices work great, but the new 5th generation will just reboot over and over. Seems to be every 5 - 10 minutes. I have it setup in the middle of my house, with some devices connected to it via ethernet cable. I used to have the Express in that location connected to a switch for my devices, and never had any issues. My log looks similar, basically nothing useful. -
New Airport Extreme802.11n &Very Odd Network&Computer Issues
Hi,
We Replaced a D-Link DGL4300 802.11G and a Airport Express M9470LL/A with the most current Airport Extreme Base Station 802.11N 2.4Ghz and 5.0Ghz Dual Band and a Airport Express 802.11N (to use with a Shared USB HP1022 Laser Jet Printer. I have contacted Apple Tech Support once regarding setup and mentioned this other ? strange issue(s)
We have broadband cable that goes to a Motorola SB5101(meets ISP specs) then Ethernet cable
from Cable Modem to Wan Port on Airport Extreme. We have multiple computers all with wireless capability 1) Imac 800mhz 874 mb ram 802.11bAirport Card 2) eMac 1.0 Ghz 1gb ram Airport Extreme 802.11bWireless Card
3) eMac 1.25 Ghz 1.0gb ram and a Airport Extreme 802.11bWireless Card* all running OSX Panther 10.3.9 *and each with 802.11B wireless cards 4) Macbook Pro bought Dec 2009 running Snow Leopard 4gb ram and 250gb HDand 802.11n wireless card 5) HP Tower xw4550 running Win XP Pro SP3 4gb ram 500GB HD and a 802.11G wireless card 6) Dell Mini Net Book running Win XP Home SP3 1ghz 1gb ram 150 GB HD and a
802.11n wireless card.
At first tried setting up the Airport Extreme with the Dell Mini as it met specs and (as of Yesterday) the Mac Book Pro is with one of our children at college but was able to set up setting up the Airport Utility and Hardware for both Peripheral Devices with the Mac Book Pro.
Then things got odd. All the computers were online (as well as two wireless "Live" capable gaming systems XBox360 and Sony PS3 , I did not check my eMac until the next day
and when I woke it from sleep (or started it) I got "You need to restart your computer"
? Kernel Panic , I ran Disk Utility, Tech Tool Deluxe, Apple Hardware Test and even Applejack. no change and while permissions were repaired Tech Tool Deluxe and The Apple Hardware Test showed no faults with anything, Tried PRAM. restart etc, then we had the other eMac 1.0ghz which has been unused since the Mac Book Pro arrived as a gift, Plugged it in , started it up, and got online, no black screen, even checked and responded to email, then restarted the (2nd eMac 1.0ghz) and the "You need to restart your computer screen came up!) once seems oh maybe, possibly its crashed, or dying out
but two side by side, No Way! , so we then isolated electrical outlets, to the extent with a 100 foot extension cord outside on our back breezeway, same thing. We even went and bought a new battery and tried it in both , no change, * Was able to shut off the airport card in safe mode, restarted and it functioned as a normal computer with airport extreme card off
*same with the 1.0ghz emac airport card off and restart and functions as a computer but no online access. We then moved one close to the Airport Extreme and hooked up by ethernet and changed the settings and Bingo no Kernel Panic Like screen and can get online, tried the other same thing! So currently the two eMacs sit side by side and we bought a long ethernet cord and it works on the table where it originally was,
I did mention this to the Apple Technician that called from Apple regarding a setup issue (as have 90 days telephone support) and he said *That there have been reports of where there are with a Guest Network (we had one set up and He had us remove it as He asked if we really needed it and I said no AND also with networks with computers with wireless cards 802.11b
and 802.11g computers on a network with the802.11n computers and a 802.11n Airport Extreme, he could not explain it any further, he suggested a possible 3rd party software incompatibilty : recent download (but have not done any on the 1.25ghz eMac and the 1.0ghz has been shut
off since Dec 2009. I am baffled , my Wife and I were seriously considering buying a new Imac to replace the 1.25ghz after the Black screen showed up, but when the other one did the same, and did the trouble shooting and then the ethernet connect we saved ourselves a lot of money (t would be nice to have a new Imac but $$ is not there)
and in the past week now (could be our ISP) our Internet connection has dropped off 4 times usually for 30-45 minutes but Friday 8-20-10 it was over 3 hours (yet our Cable TV came in) I will contact our ISP who handles both the broadband about the outages
and our cable TV has been fuzzy -grainy at times, I called Them Friday and their were no outages in our area (system wide) Now though (except with Win XP) that is our access to the Airport Extreme and Utility (it blinks orange off and on when the internet is down) the Airport Express has stayed green each time. I will contact Apple also as ?
is it the Airport Extreme (but its intermittent) channels are set to automatically if thats helpful data rather than set to a specific channel, its fairly rural where we live
I thought of buying Tiger but saw the extreme prices and I called Apple per a recent Apple Thread they did not have Tiger Retail(nor did I expect then to) but after discussing
the Emacs they said why pay so much for Tiger (and a lot are used) they said and went over both eMacs specs and I checked in detail online and called them back as it was in a "card hold" and bought Leopard 10.5.6 (as min of 512 ram, DVD drive (have a combo -drive) and a Power PCG4 which both are and I am now getting unused (non System) data off the eMac and backing it up as well and its job will be to be able to access the Airport Utility (Apple OSX Leopard 10.5.6 was $129.00 plus tax free shipping and it arrived yesterday so if settings need changed can do that (with Win XP the Airport Utility
was so different and after about 4 hours and no progress I stopped and switched to he Laptop the next day!
Has anyone experienced anything like this, I read up on both peripherals before buying and called as well to the Apple Online Store to make sure we could 1) set it up and 2) all computers specs were met to be able to a)use the network for online use and b)as well as shared printing from any and all computers and they do meet the specifications
* one last item , my Wife's Imac is also on via Ethernet, It asked for a WEP password and that was not a option in the Airport Utility set up ,only WPA-WPA2 Personal password-Security configuration
so She is not on wirelessly (though I know She has been as in the past, Her Imac was on a desk in the foyer ) That may have been with the 802.11b Apple Airport white dome and not the D-Link 802.11G router of which we had a lot of configuration issues
*I could be wrong and will read up on her specs via the Mac Tracker application or online
Many Thanks, Its so odd I did not want to leave out data etc but its a *long post and I apologize for that, I hope some one can send some light on this. On a positive avoided buying a new computer!
but makes no sense (at least to us)!
ambienttales
Imac 800mhz 874mb ram 17"LCD screen OSX 10.3.9 Airport Card
eMac1.0ghz 1.0gb ram OSX 10.3.9 802.11b Airport Extreme Card
eMac 1.25ghz 1.0 gb ram OSX 10.3.9 802.11b Airport Extreme Care
Mac Book Pro Bought new Dec 2009 4gb ram 250GB HD OSX 10.6.x Snow Leopard 802.11n Wireless Card
HP xw4550 Tower 4gb ram 500gb HD Win XP Pro SP3 802.11g wireless card
Dell Mini Net book 1ghz 1GB ram 150GB HD Win XP Home SP3 802.11N wireless care
HP 1022 Laser Jet Printer for shared network printing
Airport Extreme 802.11n Dual Band 2.4ghz and 5.0 ghz
Airport Express 802.11 (to use with HP Laser Jet Printer for shared network printing
Motorola docsis 2 Surfboard Cable Modem SB5101I too have a MacBook Pro (running OS X 10.6.6) and a PowerBook G4 (1.67 GHz, OS X 10.4.11) and an AirPort Extreme 802.11n. I configured the new AirPort Extreme Base Station N last week using the MacBook Pro and the PowerBook can no longer operate with AirPort on (Restart Computer message). A rep at the Genius Bar indicated that WPA2 encryption might interfere with the G4?? He recommended setting up WEP encryption, this is no longer an option using the AirPort setup assistant.
It would be very helpful to know how this original post was resolved. The G4 SHOULD be able to work with the AirPort Extreme 802.11n in theory, right?? -
How to connect a Sony Bravia TV to the internet through your Airport network
Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.I have now had a detailed reply from Sony Europe and the way to do this is to:
1. Press Home on the TV Setup
2. Use the right and left arrow to select Setting.
3. Use the up and down to select Network, press Enter.
4. Select Network Setup.
5. Select Wireless setup.
6. Select Scan
7. Select your network
8. A new screen will appear asking for entering the security key.
9. Enter your WPA2 key.
10. Select Enter.
11. It will take you back to the same screen asking for entering the
security key.
12. Press the right arrow.
13. Select Auto.
14. Press the right arrow.
15. Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem. -
I recently bought a Time Capsule and sucessfully set it up in accordance with the instruction book. The home network and guest network seem to work fine but my MacBook cannot find the Time Capsule wirelessley.
Initially I set up the time capsule connected to the MacBook with an ethernet cable. The Time Machine got 30GB way through a 60GB initial back up and then stopped for no obvious reason. Since then the capsule has not been visible to the MacBook. I have tried to reconfigure through Airport Utility but even after reperated rescans the capsule remains invisible.
Any help would be extremely welcome.1. i would restore the express to factory defaut by holding the reset button on the unit with a paperclip while you are powering it on
2. if it restored, you should be able to see it in your wifi icon at top of screen as "airport express"
or you can see it in airport utility
3. then if you want to connect it wirelessly to your time capsule, you would choose "extend network" and put in relevant security and password....this would make the express a wireless access point, fed by your time capsule(main router)
if you chose to do it wired which is a better way if you have access to ethernet port at wall, you would choose "create a wireless network" and then under the "network" tab you would choose "Bridge Mode".....this would make the express a wired access point, fed by your time capsule(main router) -
I have a wireless network (Airport Extreme and Airport Express for range in the back of my house). Have 4 Macs on the network. All have Open DNS set in System Prefs>Network>Airport>Advanced>DNS.
Should I set one or both of the Airports to Open DNS also? If so, how? I looked at Airport Utility and see no ready way to do it.
If I should add OPen DNS to Airport, can someone tell me how in an easy to follow fashion?
Thanks in advance!No, sorry.
All my machines are individually set for Open DNS: System Prefs>Network>Airport>Advanced>DNS: 208.67.222.222; 208.67.220.220.
The machines have been set this way for a long time.
My Q: Can/Should I set my Airports (Express and Extreme) somehow for Open DNS?
My general configuration is:Cable>Modem>Airport>4 Macs.
The hardware configuration is Cable into Router (Cox), Ethernet into Extreme, broadcast to Express 5 rooms away (to serve 2 of the 4 Macs); Ch 1 all.
Perfect connection - so don't want to mess with that.
Just want to know (if I can to speed up download time) --
Would (if possible) setting the Airport settings to Open DNS help my speed? If so, how in the world would one do that - - > set the actual base station to have Open DNS settings?
Make sense? Hope so!
Thanks!
Message was edited by: pcbjr -
Help setting up Open DNS with new airport extreme
I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?
Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode. -
Airport not available on MacBook Pro 15 unibody mid 2009, PLEASE HELP!!!!
Ok, so I just recently put in a new hard drive and battery by myself, since my original MacBook Pro hard drive became "corrupted" most likely due to a parallel desktop software I was using. Anyway so I finally install everything on the new hard drive and airport is not working. The icon is NOT EVEN THERE on the menu bar. I go into Network and the only thing I've got is Ethernet and Firewall. I've tried the "+" thing, and it didn't work. I then went into "Assist Me" , then "Diagnostics" and the airport option is greyed out, so is the external modem. Oh, and the operating system is Snow Leopard OS X 10.6.3. Has a 2.8 GHz Intel Core 2 Duo Processor.
I also deleted the "SystemConfiguration" Folder and found something interesting. The "com.apple.airport.preferences.plist" was never there and when I reboot, the "com.apple.network.identification.plist" also disappeared. I had to drag it back into the folder from the desktop where I put a copy just in case something weird happened, which it did.
I checked System Profiler, clicked on AirPort and it gives me stuff under "Software Versions", so I'm guessing it's acknowledging that THERE IS a card and can give me all the information for it, but I can't get the mac to use it. I reset the PRAM AND SMC and still nothin.
So, I figured it must be hardware, right? So I open the mac like i did when I installed the new hard drive and battery, and I CANNOT FIND THE DARN AIRPORT CARD. On the mid 2010 models it's with the bluetooth card at the top and I've tried looking online for ANYONE, who has tried to get to the airport card on the mid 2009 model for the MacBook Pro 15 unibody. And found nothing. I think it's in the clutch, but I'm too scared to touch that area. Does anyone else have any ideas or have I covered all my bases?
I REALLY DO NOT want to go to Apple. I don't have AppleCare and don't have the money to have them poke around and tell me the same thing I already know. And I spent way too much on this computer to not be able to use it to full capacity. PLEASE HELP!!!!!!From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone -
Hi,
this is my first time on the support board, so hopefully I'm doing this correctly. We have 3 desktop computers in our family, which are wired in with ethernet cables. We also use the cables with our laptops (we have various connections throughout the house) I have an iphone, and an ipad, my boys have ipod touches. I purchased an airport router to use when I'm using my ipad, etc. The boys and I would like to be able to share apps that we have purchased. I'm wondering if there is a way to use home sharing in our situation.
thanks!Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
How do I use airport extreme to share my (seagate) usb external hard drive
I talked to apple support and I was told it wont work for that but the sales info for the router (in the apple store website) says it is almost plug and play adn will work fro my ,ac or my PC's. I have seen a number of yeah and nays but, REALLY
is it possible
If not why is it one of the selling points
New struggling Mac userHello, I have a similar situation of trying to get my Maxtor One Touch4 external HDD to connect to the AEBS for use as a central storage location for files that I can access from my new Mac Mini and my Windows XP laptop. Based on your reply to David's post I wanted to share my experience and see if you have any suggestions.
1. I connected the HDD to the USB port on the AEBS and the drive shows up in the Disk Tab of Airport Utility but I cannot access any folders on the drive.
2. When the HDD is connected directly to my Mini I can access all files on the disk but I cannot save newly created files to the external HDD. In Finder, my HDD shows up in the Device list and if I right click on the HDD and select Get Info this shows my Sharing & Permissions as "read only" for this drive and the "shared folder" checkbox is unchecked. I have gone into System Preferences and turned on File Sharing and I see my name as the admin with read/write permission for this HDD.
3. I'm guessing, based on other posts of yours that I've read, that my situation might have to do with the formatting of my external HDD. It was previously used exclusively with a Dell PC running Windows 7. I will research reformatting the drive but once I do this will my PC laptop running Windows XP still be able to access this drive if it is connected through the AEBS? Also, I may be a bit confused as to how the File Sharing works on a Mac and how it applies to my issue.
Thank you for your assistance.
Maybe you are looking for
-
Remote Server Admin not working from outside of network for 1 server
Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold: 1- I can succ
-
Open 'Tools----downloads'.---Right click on any downloaded file that is available in the list.---click on 'Open Containing Folder' Results in opening the My documents folder. Not in the folder I have listed in Tools ---Options --- General---downloads
-
Trouble with google docs wont open in Firefox 5
Hi When you log onto Google Docs from Firefox 5.0 it tells you to "clear cache and cookies" but there is no instruction for 5.0 and instructions for other versions don't appear to help. No probs when I enter Google docs from Google Chrome Thanks Rich
-
How to install MVDEMO in Web Logic Server 10.3.5
I have deployed map viewer 11g PS6 on WLS 10.3.5. I am new to map viewer. I am planning to try the MVDEMO. Can someone point me to the steps involved in deploying the MVDEMO on a WLS 10.3.5. container. Thanks, Srini.
-
ICal - My subscription to the Chinese Lunar Calendar does not appear in 2012. Any idea?
I subscribe it in 2011, how come in 2012 it no longer appear? It should auto-refresh every day already. Funny this happens. Need some help and advise?