Airport fails to load and even to be reconfigured via wifi

airport fails to load and even to be reconfigured via wifi

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

Similar Messages

  • A required application library failed to load and the product cannot continue

    Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
    If there is anyone out there that has figured out a way to fix this issue please fill me in.
    This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
    I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
    Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
    Anyone have any ideas????
    See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
    I am working on
    Adobe Photoshop Version: 9.0.2 (9.0.2x296)
    Operating System: Windows XP
    Version: 5.1 Service Pack 2
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
    Physical processor count: 1
    Processor speed: 2798 MHz
    Built-in memory: 2559 MB
    Free memory: 1812 MB
    Memory available to Photoshop: 1758 MB
    Memory used by Photoshop: 55 %
    Image cache levels: 6
    Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
    Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
    Startup, 128.0G, 65.5G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed plug-ins:
    ADM 3.10x21
    ASDStrm 1.03x2
    Accented Edges 9.0
    Angled Strokes 9.0
    Average 9.0 (9.0x196)
    BMP 9.0 (9.0x196)
    Bas Relief 9.0
    Camera Raw 3.7
    Chalk & Charcoal 9.0
    Charcoal 9.0
    Chrome 9.0
    Cineon 9.0 (9.0x196)
    Clouds 9.0 (9.0x196)
    Color Halftone 9.0 (9.0x196)
    Colored Pencil 9.0
    CompuServe GIF 9.0 (9.0x196)
    Conditional Mode Change 9.0 (9.0x196)
    Contact Sheet II 9.0 (9.0x196)
    Conté Crayon 9.0
    Craquelure 9.0
    Crop and Straighten Photos 9.0 (9.0x196)
    Crop and Straighten Photos Filter 9.0 (9.0x196)
    Crosshatch 9.0
    Crystallize 9.0 (9.0x196)
    Cutout 9.0
    Dark Strokes 9.0
    De-Interlace 9.0 (9.0x196)
    Difference Clouds 9.0 (9.0x196)
    Diffuse Glow 9.0
    Displace 9.0 (9.0x196)
    Dry Brush 9.0
    Embed Watermark 1.70.19
    Export Transparent Image 9.0 (9.0x196)
    Extract 9.0 (9.0x196)
    Extrude 9.0 (9.0x196)
    FastCore Routines 9.0 (9.0x196)
    Fibers 9.0 (9.0x196)
    Film Grain 9.0
    Filmstrip 9.0 (9.0x196)
    Filter Gallery 9.0
    Fit Image 9.0 (9.0x196)
    Fresco 9.0
    Generic EPS 9.0
    Glass 9.0
    Glowing Edges 9.0
    Grain 9.0
    Graphic Pen 9.0
    HDRMergeAlign 9.0x001
    HDRMergeUI 9.0x001
    Halftone Pattern 9.0
    Ink Outlines 9.0
    Lens Blur 9.0
    Lens Correction 9.0
    Lens Flare 9.0 (9.0x196)
    Lighting Effects 9.0 (9.0x196)
    Liquify 9.0
    MMXCore Routines 9.0.1 (9.0.1x289)
    Merge to HDR 1.0x001
    Mezzotint 9.0 (9.0x196)
    Mosaic Tiles 9.0
    Multiprocessor Support 9.0 (9.0x196)
    NTSC Colors 9.0 (9.0x196)
    Neon Glow 9.0
    Note Paper 9.0
    Ocean Ripple 9.0
    OpenEXR 9.0 (9.0x196)
    PCX 9.0 (9.0x196)
    PNG 9.0 (9.0x196)
    PNG Icons 1.22x1
    Paint Daubs 9.0
    Palette Knife 9.0
    Patchwork 9.0
    Paths to Illustrator 9.0 (9.0x196)
    Pattern Maker 9.0 (9.0x196)
    Photo CD 9.0 (9.0x196)
    Photocopy 9.0
    Photomerge 9.0 (9.0x196)
    PhotomergeCylmap 9.0 (9.0x196)
    PhotomergeRender 9.0 (9.0x196)
    PhotomergeUI 9.0 (9.0x196)
    Picture Package 9.0 (9.0x196)
    Picture

    John,
    foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
    It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
    But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
    Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
    Kind regards and thanks for your info,
    Patrick

  • Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

    Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
    System - Windows 7 OS1

    Hello
    I have tried that previously, it didn’t work then and it doesn’t now.
    What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
    Regards
    Bryan

  • The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

    The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
    Help, please.

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Pages fail to load and instead show "invis.gif 1x1 pixels"

    Leopard 10.5.1, Safari 3.0.4, Mac Book Pro, Airport to Linksys WRT54Gv6 to Cable Modem.
    Sometimes, while viewing certain pages, Safari will fail to load the page and instead show "invis.gif 1x1 pixels" in the window title bar. The content area is plain white. Ironically, this is 100% reproducible when trying to reply to a forum post here.
    With the Debug menu enabled, Web Inspector shows the following warnings:
    * Resource interpreted as document but transferred with MIME type image/gif.
    * http://discussions.apple.com/post!reply.jspa?messageID=6033688
    * Resource interpreted as image but transfered with MIME type text/html.
    * http://discussions.apple.com/favicon.ico
    I've seen this failure before while randomly browsing the web, but this is the first URL I've come across that is 100% reproducible. Firefox 2.0.0.11 and Opera 9.24 don't have a problem loading the page on the same computer.
    Thoughts?
    Kenny

    Thanks iBod! I spent an hour at the local Apple Store and walked away with no solution. But the guy did say check the discussions board and I was also running into the following messages in my title bar:
    adclick (GIF Image, 1x1 pixels)
    click (GIF Image, 1x1 pixels)
    (GIF Image, 1x1 pixels)
    I had tried a trial version of NetBarrier that came with my Virus Barrier and Personal BackUp and when I deleted the app my problems began. I had no idea it was the culprit because it happened in both Safari and Firefox.
    Well after reading your reply...
    I went into Preferences and deleted the folder called "Net Barrier" and no more problems.
    Thanks again!
    Next time I'll check here first!

  • EVERY SINGLE RSS FEED displays "Live Bookmark Feed Failed to Load" and then THEY LOAD...

    Every single time I add an RSS feed as a live bookmark and view it, the top of the feed list displays a "Live Bookmark Feed Failed to Load" error... Followed by all of the NEWEST entries in that RSS feed.
    So why the hell is it saying they failed to load every single time I open a live bookmark when they are actually loading?
    I have deleted my live bookmarks and re-added them only to get the same error.
    It makes me sad that my favorite web browser is going down the toilet. Won't be more than a month or two before you get taken down by Chrome according to general web trends... Give it a year and if you don't fix all the broken crap in FireFox it will end up as the "NEW IE6" in a year or two...
    I love how the top dog in any category of business goes down the toilet as soon as the idiot board and bureaucrats get involved.

    You can try to create a new Latest Headlines bookmark by visiting this website:
    http://en-us.fxfeeds.mozilla.com/en-US/firefox/headlines.xml
    http://feeds.bbci.co.uk/news/rss.xml?edition=int

  • HP1102 Driver failed to load and printer not recognized by Win8.1

    Dear All,
    I have very weird problem and for the last 3-4 days I couldn't succeed to find any tangible solution to that which cause me to pull my hairs. I have bought a HP  LaserJet 1102 printer and have new laptop which stubbornly denies the installation of printer  into the printer category, original smart isntaller always fails .  It constantly getting installed as unknown device, but the name in device manager is correct under the unknown devices ( "HP LaserJet P1102").
    I followed the http://h10025.www1.hp.com/ewfrf/wc/document?cc=tr&lc=tr&dlc=tr&docname=c03327635 instructions 
    wihtout sucess, printer is really not recognized by OS Win8.1. Runing the HP Print and Scan Doctor retrieves that printer is connected but the diver is not installed. So what am I supposed to do to solve that problem.
    Your guidance will be appreciated,
    Regards,

    Hi @HP1102_User,
    I see that you are having issues setting up the printer on Windows 8. The driver won't load and the printer isn't being recognized properly when running the Smart Install. I will certainly do my best to help you.
    Is this printer the Laserjet P1102 or the Laserjet P1102w?  How Do I Find My Model Number or Product Number?
    Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable shouldn't be longer then 6 feet. Try another USB port on the computer. You might have to try another USB cable to see if that is causing this issue.
    Check the USB port on the Laptop, to see if it is a 2.0 or 3.0 port.
    How to determine whether a USB 3.0 device is operating at SuperSpeed?
    Try and update the driver from the Device Manager in Solution two: Software troubleshooting.
    'Device setup failed to complete' or 'Unknown device' Message Displays in Windows during USB Install...
    You can follow this document for either printer model.
    Windows 8 steps: Click the Windows Key + X to open the Start Menu. Select Device Manager from the Start Menu. (if you are still having issue go back to the beginning of the document)
    Then check the power management settings also in the Device Manager.
    Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows computer to limit or turn off power for this device.
    If you are still having issues, download and try to install the newest drivers for the printer.
    Delete the printer from the Device Manager and disconnect the USB cable first.
    Temporarily turn off any Antivirus Software, to make sure it doesn't interfere with the install.
    HP LaserJet Pro P1102 Printer Drivers.
    HP LaserJet Pro P1102w Printer Drivers.
    If you need further assistance, just let me know.
    Have a great weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Mac mini with Mountain lion fails to load and mount the os-10.6.3 install disk

    I'm trying to use the hardware test utility that should be on the applications disk.  When I put in either the install or application disk the drive kicks it out again after 15 or 20 seconds.  These disks will both load on my imac (late 2009) but of course won't install anything.
    Is this normal behavour or do I have a hardware problem?
    In addition I boot from my Mountain lion usb recovery drive but find nothing about the hardware testing utility local or online.
    I wanted to test memory.  Used memtest and shows no errors.  I also want to test everything else too.

    Thanks much folks for the replies and ideas.
    Here is more info that should have been in my first post.
    The mini is late 2009.
    It ejects the install os 10.6.3 original disks without mounting them BUT will load and mount any other dvd or cd that I have tried video, music or data.  When either of the Apple disks are inserted the drive does a low pitch vibration for several seconds then stops.  It repeats about five times then ejects.  No other disks vibrate this way.  The apple disks for the mini  do not vibrate or eject in the iMac.  They load and mount normally.
    I looked for an update for the EFIboot and couldnt see anything that I thought mached the mini.
    I have tried the NVPRAM reset with no change in behavour.
    Doing a startup with d key doesn't find the AHT.  I assume if it is on the mac-HD it would be found and run.
    There doesnt seem to be one on the recovery USB drive that I created.
    I did upgrade from SL to ML, no erase.
    BDAqua,  I'm not sure what you mean, "In fact, do 3 in a row, takes a bit of time."  Should I do 3 NVRAM resets in a row?
    I haven't tried the cleaning kit since all other disks give no problems or errors that I know of. 

  • Movies fail to load and playback in web browsers

    I can't seem to load and playback what appear to be QT movies in Safari, Chrome , or Firefox. A black window sits there and all I get is a spinning blue circle in the middle of the screen for a long time. I have a 2.66 Ghz intel imac with 2 gigs of RAM. Unfortunately I am stuck with satellite web service and my average download speed is about 1MBit/sec and frequently less. Could my problem be related to low bandwidth and/or not enough RAM? Or could I be having some sort of file conversion problem? Any help would be appreciated.
    Thanks,
    Don

    What's the URL so we can test the page?

  • Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

    Hi Guys,
    I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
    the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots. 
    1st Hardware Config:
    Intel Core2Quad Q9450
    4x2GB DDR2
    MSI P43 motherboard
    Ati Radeon x550 video card
    Software used, that seemed important for me to mention:
    NOD32 v4.2
    Comodo Firewall 5.12
    Chrome
    Screenshot Captor
    SpeedFan
    Other mentions:
    Aero is disabled, because I've considered that it's one of the causes.
    So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
    Intel Core i7 3770k
    4x8GB DDR3
    Asus P8Z77V-LX motherboard
    Intel GPU integrated in the 3770k CPU
    The problem just happened 2 times on this rig also, and the RAM was not even coming close to  it's maximum capacity of 31.7GB. It was at ~20GB's.
    Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
    My suspects:
    1) some desktop manager bugs, or other similar issue
    2)  video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think  that it is at 256MB.
    3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
    4) Adobe Shockwave Flash - maybe this one????
    I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
    http://imgur.com/a/Mc8hI#4
    Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
    you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
    Same thing still happens on the new configuration. Please advise me.
    LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

    Hi,
    First, please be ensured that you have installed the latest drivers and all the updates.
    Then check whether this issue will not in
    Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
    Clean Boot mode.
    In addition, try to create a new profile to see how it works.
    Hope this helps.
    Vincent Wang
    TechNet Community Support

  • Itunes store fails to load, and progress bar freezes, even though i am logged in.

    i cannot get the itunes store to load on my windows 7 starter netbook. i use both firefox and IE browsers. and use a 3g dongle connection. itunes has been working fine up until a month ago. now it refuses to fully load. i have checked all intenet options which are correct. and firewall settings, which allows full access to itunes. running the itunes diagnostic reports that i am not the administrator ... despite the fact that i am signed into windows as an administrator! 
    i recently updated to itunes 10.4. should i go back to an earlier version?
    what is causing this enduring frustating problem? and what is itunes doing about it?

    i also got the very long list of titles,, in blue writing ... latest cds, movies etc, without any images! like a shopping list, or the bare bones of a web page. but this only appeared on screen after i disconnected from the internet.
    i am amazed that itunes are not targeting this problem with a an alert on itunes. it is affecting quite a few users. but they don't seem to care. i've tried every means of contact, but just got the runaround treatment!

  • Xen Kernel randomly fails to load and goes out of range

    Been having an on/off issue lately that requires a hard reset of my system.  Essentially what happens is the system begins to load when my monitor reports an error that the signal is out of range.  I try to pretend login and reboot, but it does not work.  Instead, I am forced to simply reset the system and once reset it appears to boot OK without any issues.  In fact I can go a few reboots before once again it decides to break.  Below is what should be one of the logs from a failed boot, in fact, the system is in this same failed state right now as well.
    arch_1 ~ :( # journalctl -b -1
    -- Logs begin at Sat 2013-12-28 00:39:50 EST, end at Thu 2014-01-02 23:28:03 EST. --
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 332.0K (max 91.3M, leaving 137.0M of fre
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 336.0K (max 91.3M, leaving 137.0M of fre
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuset
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpu
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuacct
    Jan 02 23:22:36 arch_1 kernel: Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SM
    Jan 02 23:22:36 arch_1 kernel: Command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console=tty0
    Jan 02 23:22:36 arch_1 kernel: Freeing 9e-100 pfn range: 98 pages freed
    Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on 9e->100
    Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on bd9ff->100000
    Jan 02 23:22:36 arch_1 kernel: Released 98 pages of unused memory
    Jan 02 23:22:36 arch_1 kernel: Set 271971 page(s) to 1-1 mapping
    Jan 02 23:22:36 arch_1 kernel: Populating 80000-80062 pfn range: 98 pages added
    Jan 02 23:22:36 arch_1 kernel: e820: BIOS-provided physical RAM map:
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000100000-0x00000000bd9fefff] usable
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000100000000-0x0000000237ffffff] usable
    Jan 02 23:22:36 arch_1 kernel: NX (Execute Disable) protection: active
    Jan 02 23:22:36 arch_1 kernel: SMBIOS 2.5 present.
    Jan 02 23:22:36 arch_1 kernel: DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A10 12/20/2010
    Jan 02 23:22:36 arch_1 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jan 02 23:22:36 arch_1 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 02 23:22:36 arch_1 kernel: No AGP bridge found
    Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
    Jan 02 23:22:36 arch_1 kernel: Scanning 1 areas for low memory corruption
    Jan 02 23:22:36 arch_1 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x7fe00000-0x7fffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b47000, 0x01b47fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b48000, 0x01b48fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x7c000000-0x7fdfffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b49000, 0x01b49fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4a000, 0x01b4afff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4b000, 0x01b4bfff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4c000, 0x01b4cfff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x00100000-0x7bffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x80000000-0xbd9fefff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x80000000-0xbd9fefff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x100000000-0x237ffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: RAMDISK: [mem 0x01f54000-0x029fefff]
    Jan 02 23:22:36 arch_1 kernel: ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
    Jan 02 23:22:36 arch_1 kernel: ACPI: XSDT 00000000000fc7d7 00084 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: FACP 00000000000fc907 000F4 (v03 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: DSDT 00000000ffe9e423 05744 (v01 DELL dt_ex 00001000 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: FACS 00000000bd9ffc00 00040
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000ffea3d30 00087 (v01 DELL st_ex 00001000 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: APIC 00000000000fc9fb 00092 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: BOOT 00000000000fca8d 00028 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: ASF! 00000000000fcab5 00096 (v32 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: MCFG 00000000000fcb4b 0003C (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: HPET 00000000000fcb87 00038 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: TCPA 00000000000fcde3 00032 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: DMAR 00000000000fce15 00108 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bd9ffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
    Jan 02 23:22:36 arch_1 kernel: NUMA turned off
    Jan 02 23:22:36 arch_1 kernel: Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    Jan 02 23:22:36 arch_1 kernel: Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: NODE_DATA [mem 0x7f0c7000-0x7f0cbfff]
    Jan 02 23:22:36 arch_1 kernel: Zone ranges:
    Jan 02 23:22:36 arch_1 kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 02 23:22:36 arch_1 kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 02 23:22:36 arch_1 kernel: Normal [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: Movable zone start for each node
    Jan 02 23:22:36 arch_1 kernel: Early memory node ranges
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00001000-0x0009dfff]
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00100000-0xbd9fefff]
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: On node 0 totalpages: 2054556
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 64 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 21 pages reserved
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 3997 pages, LIFO batch:0
    Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 12072 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 772607 pages, LIFO batch:31
    Jan 02 23:22:36 arch_1 kernel: Normal zone: 19968 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: Normal zone: 1277952 pages, LIFO batch:31
    Jan 02 23:22:36 arch_1 kernel: ACPI: PM-Timer IO Port: 0x808
    Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
    Jan 02 23:22:36 arch_1 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    Jan 02 23:22:36 arch_1 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ0 used by override.
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ2 used by override.
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ9 used by override.
    Jan 02 23:22:36 arch_1 kernel: Using ACPI (MADT) for SMP configuration information
    Jan 02 23:22:36 arch_1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
    Jan 02 23:22:36 arch_1 kernel: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
    Jan 02 23:22:36 arch_1 kernel: nr_irqs_gsi: 40
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    Jan 02 23:22:36 arch_1 kernel: e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
    Jan 02 23:22:36 arch_1 kernel: Booting paravirtualized kernel on Xen
    Jan 02 23:22:36 arch_1 kernel: Xen version: 4.3.1 (preserve-AD)
    Jan 02 23:22:36 arch_1 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    Jan 02 23:22:36 arch_1 kernel: PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s86464 r8192 d24128 u262144
    Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Jan 02 23:22:36 arch_1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022431
    Jan 02 23:22:36 arch_1 kernel: Policy zone: Normal
    Jan 02 23:22:36 arch_1 kernel: Kernel command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console
    Jan 02 23:22:36 arch_1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 02 23:22:36 arch_1 kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
    Jan 02 23:22:36 arch_1 kernel: software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff880072a00000-
    Jan 02 23:22:36 arch_1 kernel: Memory: 1857868K/8218224K available (5124K kernel code, 807K rwdata, 1628K roda
    Jan 02 23:22:36 arch_1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jan 02 23:22:36 arch_1 kernel: Preemptible hierarchical RCU implementation.
    Jan 02 23:22:36 arch_1 kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 02 23:22:36 arch_1 kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 02 23:22:36 arch_1 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    Jan 02 23:22:36 arch_1 kernel: NR_IRQS:8448 nr_irqs:512 16
    Jan 02 23:22:36 arch_1 kernel: xen: sci override: global_irq=9 trigger=0 polarity=0
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 9 triggering 0 polarity 0
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=9 -> irq=9 (gsi=9)
    Jan 02 23:22:36 arch_1 kernel: xen: acpi sci 9
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=1 -> irq=1 (gsi=1)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=2 -> irq=2 (gsi=2)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=3 -> irq=3 (gsi=3)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=4 -> irq=4 (gsi=4)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=5 -> irq=5 (gsi=5)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=6 -> irq=6 (gsi=6)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=7 -> irq=7 (gsi=7)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=8 -> irq=8 (gsi=8)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=10 -> irq=10 (gsi=10)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=11 -> irq=11 (gsi=11)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=12 -> irq=12 (gsi=12)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=13 -> irq=13 (gsi=13)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=14 -> irq=14 (gsi=14)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=15 -> irq=15 (gsi=15)
    Jan 02 23:22:36 arch_1 kernel: Console: colour VGA+ 80x25
    Jan 02 23:22:36 arch_1 kernel: console [tty0] enabled
    Jan 02 23:22:36 arch_1 kernel: allocated 33030144 bytes of page_cgroup
    Jan 02 23:22:36 arch_1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 02 23:22:36 arch_1 kernel: Xen: using vcpuop timer interface
    Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 0
    Jan 02 23:22:36 arch_1 kernel: tsc: Detected 2992.224 MHz processor
    Jan 02 23:22:36 arch_1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5986
    Jan 02 23:22:36 arch_1 kernel: pid_max: default: 32768 minimum: 301
    Jan 02 23:22:36 arch_1 kernel: Security Framework initialized
    Jan 02 23:22:36 arch_1 kernel: AppArmor: AppArmor disabled by boot time parameter
    Jan 02 23:22:36 arch_1 kernel: Yama: becoming mindful.
    Jan 02 23:22:36 arch_1 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Jan 02 23:22:36 arch_1 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 02 23:22:36 arch_1 kernel: Mount-cache hash table entries: 256
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys memory
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys devices
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys freezer
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys net_cls
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys blkio
    Jan 02 23:22:36 arch_1 kernel: CPU: Physical Processor ID: 0
    Jan 02 23:22:36 arch_1 kernel: CPU: Processor Core ID: 0
    Jan 02 23:22:36 arch_1 kernel: mce: CPU supports 2 MCE banks
    Jan 02 23:22:36 arch_1 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Jan 02 23:22:36 arch_1 kernel: Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Core revision 20130725
    Jan 02 23:22:36 arch_1 kernel: ACPI: All ACPI Tables successfully acquired
    Jan 02 23:22:36 arch_1 kernel: ftrace: allocating 20318 entries in 80 pages
    Jan 02 23:22:36 arch_1 kernel: Performance Events: unsupported p6 CPU model 23 no PMU driver, software events
    Jan 02 23:22:36 arch_1 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
    Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 1
    Jan 02 23:22:36 arch_1 kernel: Brought up 2 CPUs
    Jan 02 23:22:36 arch_1 kernel: devtmpfs: initialized
    Jan 02 23:22:36 arch_1 kernel: PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
    Jan 02 23:22:36 arch_1 kernel: xen:grant_table: Grant tables using version 2 layout
    Jan 02 23:22:36 arch_1 kernel: Grant table initialized
    Jan 02 23:22:36 arch_1 kernel: RTC time: 4:22:33, date: 01/03/14
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 16
    Jan 02 23:22:36 arch_1 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PCI registered
    Jan 02 23:22:36 arch_1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
    Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    Jan 02 23:22:36 arch_1 kernel: PCI: Using configuration type 1 for base access
    Jan 02 23:22:36 arch_1 kernel: dmi type 0xB1 record - unknown flag
    Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-0> at 0
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Module Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: EC: Look up EC in DSDT
    Jan 02 23:22:36 arch_1 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Jan 02 23:22:36 arch_1 kernel: ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0
    Jan 02 23:22:36 arch_1 kernel: ACPI: Interpreter enabled
    Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hw
    Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hw
    Jan 02 23:22:36 arch_1 kernel: ACPI: (supports S0 S1 S4 S5)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 02 23:22:36 arch_1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and rep
    Jan 02 23:22:36 arch_1 kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only par
    Jan 02 23:22:36 arch_1 kernel: PCI host bridge to bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
    Jan 02 23:22:36 arch_1 kernel: DMAR: Forcing write-buffer flush capability
    Jan 02 23:22:36 arch_1 kernel: DMAR: Disabling IOMMU for graphics on this chipset
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: [8086:105e] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7880000-0xf789ffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xf78a0000-0xf78bffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7900000-0xf791ffff pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: [8086:105e] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf78c0000-0xf78dffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x14: [mem 0xf78e0000-0xf78fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x18: [io 0xdce0-0xdcff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: [1102:0007] type 00 class 0x040100
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: reg 0x10: [io 0xcce0-0xccff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: supports D1 D2
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Enabled 2 GPEs in block 00 to 3F
    Jan 02 23:22:36 arch_1 kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Jan 02 23:22:36 arch_1 kernel: Found 1 acpi root devices
    Jan 02 23:22:36 arch_1 kernel: xen:balloon: Initialising balloon driver
    Jan 02 23:22:36 arch_1 kernel: xen_balloon: Initialising balloon driver
    Jan 02 23:22:36 arch_1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 02 23:22:36 arch_1 kernel: vgaarb: loaded
    Jan 02 23:22:36 arch_1 kernel: vgaarb: bridge control possible 0000:00:02.0
    Jan 02 23:22:36 arch_1 kernel: PCI: Using ACPI for IRQ routing
    Jan 02 23:22:36 arch_1 kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
    Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0xbd9ff000-0xbfffffff]
    Jan 02 23:22:36 arch_1 kernel: NetLabel: Initializing
    Jan 02 23:22:36 arch_1 kernel: NetLabel: domain hash size = 128
    Jan 02 23:22:36 arch_1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 02 23:22:36 arch_1 kernel: NetLabel: unlabeled traffic allowed by default
    Jan 02 23:22:36 arch_1 kernel: Switched to clocksource xen
    Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI init
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP registered
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0800-0x085f] could not be reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0c00-0x0c7f] has been reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0860-0x08ff] has been reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:01: [dma 4]
    Jan 02 23:22:36 arch_1 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 13 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 8 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 6 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:05: [dma 2]
    Jan 02 23:22:36 arch_1 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI: found 7 devices
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP unregistered
    Jan 02 23:22:36 arch_1 kernel: PM-Timer failed consistency check (0xffffff) - aborting.
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 1 [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 2
    Jan 02 23:22:36 arch_1 kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 02 23:22:36 arch_1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 02 23:22:36 arch_1 kernel: TCP: Hash tables configured (established 65536 bind 65536)
    Jan 02 23:22:36 arch_1 kernel: TCP: reno registered
    Jan 02 23:22:36 arch_1 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
    Jan 02 23:22:36 arch_1 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 1
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: Boot video device
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=16 -> irq=16 (gsi=16)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=17 -> irq=17 (gsi=17)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=22 -> irq=22 (gsi=22)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=23 -> irq=23 (gsi=23)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=18 -> irq=18 (gsi=18)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: PCI: CLS 64 bytes, default 64
    Jan 02 23:22:36 arch_1 kernel: Unpacking initramfs...
    Jan 02 23:22:36 arch_1 kernel: Freeing initrd memory: 10924K (ffff880001f54000 - ffff8800029ff000)
    Jan 02 23:22:36 arch_1 kernel: Simple Boot Flag at 0x7a set to 0x1
    Jan 02 23:22:36 arch_1 kernel: Scanning for low memory corruption every 60 seconds
    Jan 02 23:22:36 arch_1 kernel: audit: initializing netlink socket (disabled)
    Jan 02 23:22:36 arch_1 kernel: type=2000 audit(1388722954.276:1): initialized
    Jan 02 23:22:36 arch_1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 02 23:22:36 arch_1 kernel: zbud: loaded
    Jan 02 23:22:36 arch_1 kernel: VFS: Disk quotas dquot_6.5.2
    Jan 02 23:22:36 arch_1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 02 23:22:36 arch_1 kernel: msgmni has been set to 3650
    Jan 02 23:22:36 arch_1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 02 23:22:36 arch_1 kernel: io scheduler noop registered
    Jan 02 23:22:36 arch_1 kernel: io scheduler deadline registered
    Jan 02 23:22:36 arch_1 kernel: io scheduler cfq registered (default)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 02 23:22:36 arch_1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 02 23:22:36 arch_1 kernel: intel_idle: does not run on family 6 model 23
    Jan 02 23:22:36 arch_1 kernel: GHES: HEST is not enabled!
    Jan 02 23:22:36 arch_1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: 0000:00:03.3: ttyS0 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
    Jan 02 23:22:36 arch_1 kernel: hpet_acpi_add: no address or irqs in _CRS
    Jan 02 23:22:36 arch_1 kernel: Linux agpgart interface v0.103
    Jan 02 23:22:36 arch_1 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
    Jan 02 23:22:36 arch_1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 02 23:22:36 arch_1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jan 02 23:22:36 arch_1 kernel: mousedev: PS/2 mouse device common for all mice
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: RTC can wake from S4
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
    Jan 02 23:22:36 arch_1 kernel: drop_monitor: Initializing network drop monitor service
    Jan 02 23:22:36 arch_1 kernel: TCP: cubic registered
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 10
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 17
    Jan 02 23:22:36 arch_1 kernel: Key type dns_resolver registered
    Jan 02 23:22:36 arch_1 kernel: registered taskstats version 1
    Jan 02 23:22:36 arch_1 kernel: Magic number: 14:436:362
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: setting system clock to 2014-01-03 04:22:34 UTC (1388722954)
    Jan 02 23:22:36 arch_1 kernel: PM: Hibernation image not present or could not be loaded.
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    Jan 02 23:22:36 arch_1 kernel: Write protecting the kernel read-only data: 8192k
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    Jan 02 23:22:36 arch_1 systemd-udevd[50]: starting version 208
    Jan 02 23:22:36 arch_1 kernel: Floppy drive(s): fd0 is 1.44M
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type USB registered
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbfs
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver hub
    Jan 02 23:22:36 arch_1 kernel: SCSI subsystem initialized
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new device driver usb
    Jan 02 23:22:36 arch_1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 02 23:22:36 arch_1 kernel: ehci-pci: EHCI PCI platform driver
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: debug port 1
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
    Jan 02 23:22:36 arch_1 kernel: FDC 0 is a post-1991 82077
    Jan 02 23:22:36 arch_1 kernel: libata version 3.00 loaded.
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: 6 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
    Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
    Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: version 3.0
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: scsi0 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi1 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi2 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi3 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi4 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi5 : ahci
    Jan 02 23:22:36 arch_1 kernel: ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata5: DUMMY
    Jan 02 23:22:36 arch_1 kernel: ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 58
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: pata_acpi 0000:00:03.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
    Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: debug port 1
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: 6 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: ata_generic 0000:00:03.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: scsi6 : ata_generic
    Jan 02 23:22:36 arch_1 kernel: scsi7 : ata_generic
    Jan 02 23:22:36 arch_1 kernel: ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
    Jan 02 23:22:36 arch_1 kernel: ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
    Jan 02 23:22:36 arch_1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata6: SATA link down (SStatus 0 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata2.00: ATAPI: PIONEER DVD-RW DVR-217D, 1.07, max UDMA/66
    Jan 02 23:22:36 arch_1 kernel: ata3.00: ATA-8: WDC WD15EARX-00ZUDB0, 80.00A80, max UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    Jan 02 23:22:36 arch_1 kernel: ata1.00: ATA-6: WDC WD360GD-00FNA0, 34.06J34, max UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata1.00: 72303840 sectors, multi 0: LBA48
    Jan 02 23:22:36 arch_1 kernel: ata1.00: applying bridge limits
    Jan 02 23:22:36 arch_1 kernel: ata2.00: configured for UDMA/66
    Jan 02 23:22:36 arch_1 kernel: ata3.00: configured for UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata1.00: configured for UDMA/100
    Jan 02 23:22:36 arch_1 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 34.0 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217D 1.07 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD15EARX-00Z 80.0 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write Protect is off
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP
    Jan 02 23:22:36 arch_1 kernel: sda: sda1 sda2
    Jan 02 23:22:36 arch_1 kernel: sdb: sdb1
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
    Jan 02 23:22:36 arch_1 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
    Jan 02 23:22:36 arch_1 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 02 23:22:36 arch_1 kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 02 23:22:36 arch_1 kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
    Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
    Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: 3 ports detected
    Jan 02 23:22:36 arch_1 kernel: device-mapper: uevent: version 1.0.3
    Jan 02 23:22:36 arch_1 kernel: device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
    Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-1> at 1
    Jan 02 23:22:36 arch_1 kernel: usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
    Jan 02 23:22:36 arch_1 kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbhid
    Jan 02 23:22:36 arch_1 kernel: usbhid: USB HID core driver
    Jan 02 23:22:36 arch_1 kernel: input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/u
    Jan 02 23:22:36 arch_1 kernel: hid-generic 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitec
    Jan 02 23:22:36 arch_1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    Jan 02 23:22:36 arch_1 kernel: usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
    Jan 02 23:22:36 arch_1 systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SY
    Jan 02 23:22:36 arch_1 systemd[1]: Detected virtualization 'xen'.
    Jan 02 23:22:36 arch_1 systemd[1]: Set hostname to <arch_1>.
    Jan 02 23:22:36 arch_1 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit
    Jan 02 23:22:36 arch_1 systemd[1]: Expecting device dev-hvc0.device...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Remote File Systems.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Remote File Systems.
    Jan 02 23:22:36 arch_1 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting LVM2 metadata daemon socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on LVM2 metadata daemon socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Delayed Shutdown Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Device-mapper event daemon FIFOs.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Paths.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Paths.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Journal Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Setup Virtual Console...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Load Kernel Modules...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Service...
    Jan 02 23:22:36 arch_1 systemd[1]: Started Journal Service.
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Journal started
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Kernel Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Kernel Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Control Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Control Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Coldplug all Devices...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 02 23:22:36 arch_1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Po
    Jan 02 23:22:36 arch_1 systemd[1]: Started Set Up Additional Binary Formats.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Create list of required static device nodes for the current kernel
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting Huge Pages File System...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Encrypted Volumes.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Encrypted Volumes.
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting Debug File System...
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting POSIX Message Queue File System...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Apply Kernel Variables...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Swap.
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Swap.
    Jan 02 23:22:37 arch_1 systemd[1]: Started File System Check on Root Device.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Remount Root and Kernel File Systems...
    Jan 02 23:22:37 arch_1 systemd[1]: Expecting device dev-disk-by\x2duuid-1f355bf1\x2d1469\x2d4722\x2d8f65\x2d01
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Root Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice Root Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting User and Session Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice User and Session Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting System Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice System Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-netctl.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-netctl.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-getty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-getty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-serial\x2dgetty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-serial\x2dgetty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Slices.
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Slices.
    Jan 02 23:22:37 arch_1 systemd[1]: Started udev Coldplug all Devices.
    Jan 02 23:22:37 arch_1 kernel: FS-Cache: Loaded
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered named UNIX socket transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered udp transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'nfs'
    Jan 02 23:22:37 arch_1 kernel: FS-Cache: Netfs 'nfs' registered for caching
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_evtchn'
    Jan 02 23:22:37 arch_1 kernel: xen:xen_evtchn: Event-channel device installed
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntdev'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntalloc'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_blkback'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_netback'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_pciback'
    Jan 02 23:22:37 arch_1 kernel: xen_pciback: backend is vpci
    Jan 02 23:22:37 arch_1 kernel: ACPI: Requesting acpi_cpufreq
    Jan 02 23:22:37 arch_1 kernel: Monitor-Mwait will be used to enter C-1 state
    Jan 02 23:22:37 arch_1 kernel: Warning: Processor Platform Limit not supported.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Apply Kernel Variables.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Setup Virtual Console.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Huge Pages File System.
    Jan 02 23:22:37 arch_1 kernel: xen_acpi_processor: Uploading Xen processor PM info
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Debug File System.
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_acpi_processor'
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted POSIX Message Queue File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Load Kernel Modules.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounting Configuration File System...
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted FUSE Control File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Configuration File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Create list of required static device nodes for the current kernel.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Create static device nodes in /dev...
    Jan 02 23:22:37 arch_1 systemd[1]: Started Remount Root and Kernel File Systems.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Load/Save Random Seed...
    Jan 02 23:22:37 arch_1 kernel: EXT4-fs (dm-0): re-mounted. Opts: data=ordered
    Jan 02 23:22:37 arch_1 systemd[1]: Started Load/Save Random Seed.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Create static device nodes in /dev.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting udev Kernel Device Manager...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Local File Systems (Pre).
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Local File Systems (Pre).
    Jan 02 23:22:37 arch_1 systemd[1]: Mounting /tmp...
    Jan 02 23:22:37 arch_1 systemd[1]: Mountin

    I have the same problem on Fedora Core 20 with xen 4.3.1 32bit Sempron3200+ with turned off HPET tables on South bridge and these boot options
    xen: noreboot nosmp console_to_ring console=vga vga=text-80x50
    linux: pci=noacpi pci=nommconf
    Image on Yandex disk
    When I solve it I notify you.
    Last edited by maskimko (2014-01-16 08:12:35)

  • Fail to load and read dbms_lob.bfile offset more than 2G

    Hi!
    Recently I have encountered a strange problem I can't find any mention about.
    I load a large file by pieces of 1 Gigabyte. When offset becomes more than 2 Gigabytes (2147483649 bytes for example) I have Exception ORA-22288: file or LOB operation FILEOPEN failed.
    (The file about 4G is already loaded.)
    declare
    p_dir_name varchar2(200) := 'DIR_BLOB_IN' ;
    p_file_name varchar2(200) := 'A vid2.avi' ;
    v_blob_id integer := 194 ;
    v_blob_loc blob;
    v_bfile_loc bfile;
    v_inc_var integer := 1073741824 ;
    v_blob_offset integer := 2147483649 ;
    v_bfile_offset integer := 2147483649 ; -- Offset more than 2G - the procedure doesn't work
    v_bfile_offset      integer        := 1073741825 ;  Offset = 2G
    v_err_message varchar2(200);
    v_bfile_is_open boolean := false;
    function blob_forupdate (blob_id in integer)
    return blob
    is
    cursor blob_to_open
    is
    select blob_in_body
    from tb_blob_in
    where blob_in_id = blob_id
    for update;
    blob_body blob_to_open%rowtype;
    begin
    open blob_to_open;
    fetch blob_to_open into blob_body;
    close blob_to_open;
    return blob_body.blob_in_body;
    end;
    begin
    v_blob_loc := blob_forupdate( v_blob_id );
    v_bfile_loc := bfilename(p_dir_name, p_file_name);
    dbms_output.put_line( 'Opening bfile...' );
    dbms_lob.fileopen( v_bfile_loc );
    dbms_output.put_line( 'Bfile is open.' );
    dbms_lob.loadfromfile( v_blob_loc, v_bfile_loc, v_inc_var, v_blob_offset, v_bfile_offset ); commit;
    dbms_output.put_line( 'Closing bfile...' );
    dbms_lob.fileclose( v_bfile_loc );
    dbms_output.put_line( 'Bfile is closed.' );
    exception
    when others
    then
    v_err_message := substr( sqlerrm, 1 , 200);
    dbms_output.put_line( 'OTHERS Exception ' || sqlerrm );
    v_bfile_is_open := dbms_lob.fileisopen(v_bfile_loc) = 1 ;
    if v_bfile_is_open
    then
    dbms_output.put_line( 'File ''' || p_file_name || ''' in the directory ''' || p_dir_name || ''' is open!' );
    dbms_output.put_line( 'Closing it...' );
    dbms_lob.fileclose( v_bfile_loc );
    dbms_output.put_line( 'The file is closed!' );
    else
    dbms_output.put_line('File ' || p_file_name || ' in the directory ''' || p_dir_name || ''' closed!' );
    end if;
    end;
    The same story with dbms_lob.read operation:
    declare
    p_dir_name varchar2(200) := 'DIR_BLOB_IN';
    p_file_name varchar2(200) := 'A vid2.avi';
    v_bfile_loc bfile;
    v_read_amount binary_integer := 10 ;
    v_read_offset integer;
    v_read_buffer varchar2(20);
    v_bfile_is_open boolean := false;
    v_message varchar2(200);
    begin
    dbms_output.put_line( 'File ' || p_file_name || ' in ' || p_dir_name || '' || '' );
    v_bfile_loc := bfilename(p_dir_name, p_file_name);
    dbms_lob.fileopen( v_bfile_loc );
    v_message := 'Offset < 2G: ' ;
    dbms_output.put_line( v_message );
    v_read_offset := 2000000000; -- offset < 2G
    dbms_lob.read( v_bfile_loc, v_read_amount, v_read_offset, v_read_buffer );
    dbms_output.put_line( v_message || to_char( v_read_buffer ) );
    v_message := 'Offset= 2G: ' ;
    dbms_output.put_line( v_message );
    v_read_offset := 2147483648; -- offset = 2G
    dbms_lob.read( v_bfile_loc, v_read_amount, v_read_offset, v_read_buffer );
    dbms_output.put_line( v_message || to_char( v_read_buffer ) );
    v_message := 'Offset > 2G: ' ;
    dbms_output.put_line( v_message );
    v_read_offset := 2147483649; -- offset > 2G
    dbms_lob.read( v_bfile_loc, v_read_amount, v_read_offset, v_read_buffer );
    dbms_output.put_line( v_message || to_char( v_read_buffer ) );
    dbms_lob.fileclose( v_bfile_loc );
    exception
    when others
    then
    dbms_output.put_line(sqlerrm);
    dbms_output.put_line('The Beginning');
    v_bfile_is_open := dbms_lob.fileisopen(v_bfile_loc) = 1 ;
    dbms_output.put_line('The End');
    if v_bfile_is_open
    then dbms_lob.fileclose( v_bfile_loc );
    end if;
    end;
    --END Read from bfile starting with offset
    I can load this file as a whole and I can get its length. I can load parts of this file equal or less than 2G into blob with any blob offset I want. But when bfile offset is more than 2 Gigabytes the error occures.
    I have an Oracle Database server Release 10.2.0.1.0 on Microsoft Windows XP (Professional Version 2002, Service Pack 3). And I have an Oracle Database 10.2.0.2.0 on Microsoft Windows Server 2003 R2 (Enterprise Edition Service Pack 1) also. It doesn't work on both of them.
    I have no Oracle Database on Unix or 64-bit Windows, so I can't test on those operational systems.
    Can anybody help me? (( I lost any hope to solve this problem (((
    Edited by: Shindou on Feb 17, 2009 4:40 AM

    See Mark Drake's (Product Manager Oracle XMLDB, Oracle US) response in this old post: ORA-31167: 64k size limit for XML node
    The "in a future release" reference, means that this boundary 64K / node issue, was lifted in 11g and onwards...
    So first of all, if not only due to performance improvements, I would strongly suggest to upgrade to a database version which is supported by Oracle, see My Oracle Support... In short Oracle 10.2.x was in extended support up to summer 2013, if I am not mistaken and is currently not supported anymore...
    If you are able to able to upgrade, please use the much, much more performing XMLType Securefile Binary XML storage option, instead of the XMLType (Basicfile) CLOB storage option.
    HTH

  • 10.7 Update fails to load and corrupts most recent version?

    10.7 Update has failed twice resulting in restore to previous day.  What is the problem Apple?

    stillNu2Mac wrote:
    The original issue occurred due to a Apple Software download (iTunes). This time due to an Apple OS X 10.6.7 download and install (update).
    I agree with Barney that software generally doesn't damage hardware. In decades of experience with computers I can only remember once such case many years ago, where incorrect video settings could damage a monitor. As he says, it's more likely that the disks are being damaged by another hardware fault, such as a non-operating fan causing overheating.
    I did do a repair disk, and the software said everything would be saved.
    I've never seen such a message from Disk Utility's "repair disk" operation.
    I also put everything into "File Vault" and password protected it. Can't find out how to get to File Vault and free my stuff.
    To do that you need to boot from your internal drive.

  • OS X 10.10.3 update thru' iTunes fails to load and install

    Having already tries SMC and PRAM resets, and having to wait 12 to 15 hours to download it, the OS X 10.10.3 update thru' iTunes fails to complete.  Reasons cited include possible corruption and/or incomplete download.

    Download the 10.10.3 update from Apple Support Downloads, faster and more reliable.
    OS X Yosemite 10.10.3 Combo Update
    Good luck.

Maybe you are looking for

  • Date parameters for the previous fiscal quarter?

    Hello Folks, I have this requirement of selecting the dates for the previous fiscal quarter. usually a fiscal quarter is January 2011 - March 2011. But in my case the fiscal year should be December 2010 to February 2011 and if i check in june 2011 it

  • IPhoto iCloud - My Photo Stream

    "My Photo Stream" on Shared - iCloud folder in iPhoto is not receiving any updates from iCloud. My iPad is getting photos i take on my iphone and visa versa though my iPhoto application on my Mac is not getting any photos. Everything on the iMac is c

  • Enter key in jato:textField crashes ViewBean

    I have a jato:textField in a very simple JSP/ViewBean which was migrated from NetDynamics with the iMT tool and then hand-modified to work under the JATO framework. If I click Enter in the textField, the page crashes with ServletException "The reques

  • Why does the EEvents message come up every time the computer is opened after being shut off?

    Why does the EEvents message come up every time the computer is opened after being shut off?

  • Any way to enhance BIBeans charts?

    BIBeans charts are not rich or customizable enough. For example, it has no "gauge chart", no "compound" charts (eg. in one chart, some data is drawn with bars, other data with curves), cannot draw part of columns of a table. Is it possible to assist