Airport Fast on Windows than Mac

Airport Express / PBG4 1.5ghz 1GB RAM OsX 10.4.11 / HP Compaq Pentium 4 WIndows XP 512MB RAM
Both running Safari 3.
I find that the PC is much faster on my ADSL conection via Airport & Ethernet than my PowerBook G4.
Is there any particular reason for this?
Christo.

davidoff wrote:
Arguably an R rather than Arch question I realize but:
my colleague and I both have brand new Lenovo ThinkCentres. Same specs but he has more RAM (I don't think that's the issue). We run the same program
length <- 2*10^6
a <- runif(length)
b <- runif(length)
print(summary(lm(a~b)))
I take 16 seconds in Arch 64, but never bump against a memory constraint (looks like about 1/3 of RAM used max).
My colleague, with Windows, takes 7 seconds.
The R documentation says 32 bit R is about 10% faster in some cases, but that doesn't explain a 50% difference.
I *think* I have compiled 32 bit R on my system and it doesn't seem to go any faster.
By contrast I run a python loop a bit faster than my colleague.
Thoughts?
If I run that on my Arch64 box, it takes 23 sec. If I run it a second time it takes 6 sec.
Jay

Similar Messages

Can I use Airport TimeCapsule's internal hard drive as a network-based backup solution for both windows and mac?

Does the following scenario work??? :-
A Windows PC is connected to Airport TimeCapsule (ATC) wifi.
A Mac is connected to the ATC wifi.
The Mac's Time Machine software is set up and automatically backs up to the internal HDD.
The Mac can browse files on the internal HDD, and drag and drop files to and from.
The PC can easily see the internal HDD as a device on the network. The PC can drag and drop files to the internal HDD. The PC can read and write to the files that the MAC has placed on it. The PC has some automated backup software installed, which recognises the ATC internal HDD as a backup storage device.

You are right.. you cannot partition a TC.
Nor can you use NTFS..
And you can corrupt the TM backup but you can do that from Mac just as well.. the TC is better with one disk used for data or TM and another disk.. a USB plugged in for the other.
Windows compatible means.. all names are short, no spaces and pure alphanumeric.
You used to be able to set workgroup but Apple haven't bothered with that of late.. there is no upgrade to the airport utility for windows.. although one should be coming. Windows can have issues.. it was no problem on the older 5.6 utility and that still partly works but I have no idea if it will work on the AC model.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html

HT1515 I have moved from windows to mac and had to reset my airport. I am trying it to join the existing wireless network. the process ends in an unexpected error. The ethernet connection seems to work OK

I have moved from windows to mac and had to reset my airport express. After the reset I enter the name of the existing network, name the base unit, enter its password twicw and select additional options as join the existing network. It comes back with a screen asking for the name of the base unit and password. Aftre which it starts cycling between "waiting for airport express", "connecting to 'network name'" and ends with an error message. When I try to set up using ethernet cable evrything works but I need wireless (it worked OK just hours ago). Any advice?
Thank you

Hello, vgafromva.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the AirPort can resolve this issue. However, here is an article I would recommend going through when experiencing issues connecting to Wi-Fi.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
If these steps do not resolve the issue, please reply back with the exact error message received.
Cheers,
Jason H.

HT4759 Why did apple support Windows better than Mac in iCloud?

Why did apple support Windows better than Mac in iCloud?

chewy cabeza wrote:
Why did apple support Windows better than Mac in iCloud?
From your point of view and the framing of your question, Apple does indeed support WIndows better than Mac for the limited issue of iCloud.
chewy cabeza wrote:
...YET, Leopard and Snow Leopard are NOT iCloud compatible. How can that be justified? Obviously, Apple can make iCloud available to Snow Leopard, but disdains us...
Historically speaking, Apple has rarely gone backwards in its OS development. Once they have released a new OS with new technology, I can only think of one example of when they backtracked: They released TrueType technology in System 7 and then released System 6.0.8, which included TrueType technology for continuing System 6 users.
So it is part of their culture to move forward and not backwards. Other examples:
• Inclusion of the then novel SONY 3.5" disk drive in its release of the first Macintosh (and not the industry standard 5.25" drive); after its use in the Lisa and adoption for the Apple II series of computers.
• Elimination of the floppy drive completely in the release of the first iMac.
• Use of then novel AAC audio compression as "state of the art" compression for the iPod release in 2001 instead of the outdated mp3 standard.
• Refusal to allow use of FLASH in iPod Touch/iPhone/iPads.
How could they justify these decisions? The marketplace justified them for Apple!
So, yes, they could release 10.6.9 with iCloud support. But why now, if not then?

Adobe AIR 13 Runtime Security Bulletin for Windows or Mac

According to 5/13/2014 - Release - AIR 13 Runtime and SDK, the update for Adobe AIR 13 on 5/13/2014 includes fixes and security updates "Security update details can be found here: Security Bulletin (APSB14-14)", we have two questions:
1. Why the Adobe Air 13 runtime for Windows and Mac is not listed in the security bulletin APSB14-14, like APSB14-02?
2. Was the version released before Adobe AIR 13.0.0.111 for Windows Adobe AIR 4.0.0.1390 or Adobe AIR 13.0.0.83?
Thanks!
-TeamOCD

MacWorld did a comparative evaluation of the October 2008 MBA with 1.86 GHz processor and the Mid-2009 MBA with 2.13 GHz chip. Their conclusion was that that 1.86 CPU was actually FASTER than the 2.13 in most applications.
http://www.macworld.com/article/141296/2009/06/macbookairmid09.html
They speculated that the 2.13 chip was being throttled by Apple to control heat issues and that's why it tested SLOWER than the (supposedly) slower 1.86 part.
Have to wait for testing of these new MBA units to know if the same thing occurs. But, for the Rev. B and C MBAs, the 1.86 part was actually faster in real world use!

Switching from Windows to Mac - Drive Compatibility

I'm finally getting back to Mac after a 15 year break using Windows.
My question relates to all my existing files. I have an external drive that I store all of my data on. It includes my ITUNES files, my photos etc. The drive actually hangs off of my Airport Extreme N Router.
When I get my MAC, will I be able to access those files? Will this be read/write? Even if it is just once so that I can copy them off of my external drive and onto my new Mac harddrive? Sorry, being in the Windows world I'm hung up on always thinking that things are incompatible. Is the drive formatted in a way that I can access?
I plan to use Boot Camp and/or Parellels as well - a couple of nagging work applications with no Mac version. When running Windows, will I still be able to access files from that drive as well? For instance, if I continue to run Windows Office while in the Windows environment, can I read/write files to that drive still without disturbing files that the Mac OS and applications will be accessing? Or will the drive be eitehr pure "windows or mac" ?
I'd still like the external drive to be accessable from the other Windows machine in the house as well until I switch that one out....can that happen?
What about my Apple TV which I haven't installed yet. Will it be able to access my photo files, etc. on this drive?
This is my last hold up to switching. I just dont want to dive in and find myself without any of my old data.
I know the answer is probably easier to explain than I'm asking. I just can't get my head wrapped around this for some reason. Thanks in advance.
Summary:
One Windows Machine that uses External Drive for all data storage - replacing with Mac
One Windows Machine that uses External Drive for backups
External Drive hanging off of AEN router.
Apple TV - to be installed

Hello Atlantax,
I can't answer all of your questions, but some.
my photos etc.
Yes. As you know, all files are associated in Windows by their extension. With OS X, the Mac is also now like this. Though it does double up with the older Type/Creator codes of OS 9 and earlier. So all you your .jpg, .tif, .eps, .ai and other formats will all be easily recognized by your Mac counterpart applications like Photoshop, Illustrator, Quark, etc.
Not that it will be perfect. On the Mac, while all .eps files for example, like Windows, have the same extension no matter which app created them, the Mac also assigns Type/Creator codes to each file so it knows which app it belongs to. So unlike Windows, which can have .eps assigned to only one application (meaning an Illustrator .eps will try to open in Photoshop if that's the app the .eps extension is assigned to), this doesn't happen on the Mac. An .eps created in Photoshop will open in Photoshop, Illustrator in Illustrator, etc., when you double click on them.
But you will have an issue with the files you copy over since they will have no Type/Creator codes. As will .jpg, .tif and all other image formats. If there's more than one app that can open them, you'll have the same issue with those older files as you do in Windows. They will simply try to open in the whatever the default app is in the LaunchServices database.
You could get around this somewhat by assigning a Photoshop .eps to Photoshop. But then OS X will behave just like Windows and try to open all .eps files in Photoshop, ignoring the Type/Creator codes.
Will this be read/write?
If it's FAT16 or FAT32, it will be read/write. If it's NTFS, it will be read only.
When running Windows, will I still be able to access files from that drive as well?
Yes. It would be best to have the external formatted as FAT32 so both the Mac and Windows can access it natively. What the Mac will do in that case is copy two files to the external drive for each item you copy over. Say the name of the file is KittyCat.tif. It will put these two files on the external drive:
KittyCat.tif
._KittyCat.tif
Since the second file starts with a period, it will be invisible in OS X. But it's important because it holds the resource fork information of a Mac drive that can't normally exist on a FAT32 drive. So when you copy it back, OS X will automatically rejoin the data fork information (visible file) with the resource fork information (Type/Creator codes, time stamps, etc.). You'll see those ._xxx files from within Windows, so don't just start deleting them. Either that, or use OS X's Disk Utility to partition the drive into two parts. One as Mac OS Extended (HFS+), and the other as FAT32. Then save your files on each partition as per the OS they belong to.
I'd still like the external drive to be accessible from the other Windows machine in the house as well until I switch that one out....can that happen?
Yes, if it's FAT32, or split into separate Mac/Windows partitions as described above. Unless you've got MacOpener on your Windows machine, it simply won't access the Mac formatted partition. NTFS will also work, but you'll only be able to read from the Mac.
Also, as Gnarlodious mentions, the Mac will let you use some characters in file names that Windows doesn't allow. I'm sure you're already aware of these, but here's a list anyway.
These are all characters reserved by the system in DOS.
? [ ] / \ = + : ; " , * |
In the Windows Joliet file system, these characters are not allowed.
? / \ : " * |
Hope this helps.

Format: Windows to Mac

The iPod touch says it is in "Windows" format. This isn't a problem, but soon I will be moving to mac, and I was wondering if when I transfer my iTunes library over to my new mac, whether or not this will change to "Macintosh." If it doesn't (I don't think it would), will restoring change it if I restore and then sync with a mac? And would there be any benefit to restoring and changing it to mac? I'll probably restore anyways, but I am still curious.

*I was wondering if when I transfer my iTunes library over to my new mac, whether or not this will change to "Macintosh."*
No it won't
*If it doesn't (I don't think it would), will restoring change it if I restore and then sync with a mac?*
Yes, restoring an iPod on a Mac reformats it (except in the case of the iPod shuffle which is FAT32 and will retain it's formatting even if it's restored on a Mac)
*And would there be any benefit to restoring and changing it to mac?*
That depends on whether or not you intend to use the iPod on Windows and Mac. If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). A Mac formatted iPod will mount and unmount faster on OS X than a PC formatted one. This point isn't really relevant to the Touch which isn't designed to be enabled for disk use but you want to use a regular iPod as a removable drive you won't have the same file size restrictions Windows formatting has. A FAT32 formatted iPod or other drive cannot transfer files which are 4GB or larger. In addition to those, (except in the case of the Shuffle) the iPod's Windows firmware cannot be updated from Mac OS X without doing a restore. This would mean you would need to connect back to a PC when a software update came along.

About to move from Windows to Mac. Considering purchasing retina display MBP 15" with dual boot system as I need some of my programs. How is the display in windows for photoshop?

Has anyone got any thoughts or have you yourself purchased the MBP with Retina display and added the dual boot system with windows?
I desperately need to update my gear and want a MBP.
I'm a full time photographer at my local paper and freelance photographer - use computers A LOT, and only use windows. I've experienced mac and know I prefer it, the way it runs pleases me a whole lot more and for the amount i'm processing/working I need something that will keep up.
With 12 years of photoshop gear loaded up for all my photo processing etc, I'm wanting to add Windows and have use of both. Windows would run photoshop that I had already purchased some time ago - question is, how will it run? what will the display be like running Windows on Mac with the retina display?
I use CS4 at the moment and can't afford to upgrade to CS6 just yet, plus i'd waste a lot of what I already have by starting again on Mac. I'd use Mac for everything else, need the use of Windows for portions of what I do.
About to head to Canada and want to get set up for the road. Any help is much appreciated.
Thanks heaps!

There are some drawbacks, running Windows 7 (only) on a Mac via Bootcamp yields less than stellar results, especially with the Retina display.
And of your traveling, the Mac's high power needs (especially the Retina display) and lack of removable battery are going to be a serious issue. The Retina display is glossy, not ideal for viewing on the road and in varied environments.
CS4 won't run on the OS X version that comes with a Mac, so your looking at purchasing CS6.
Support for Windows is more widespread than for Mac's, also if you ever need to redownload OS X to fix a issue, requires a fast reliable Internet connection of the broadband kind.
If your running Windows on your Mac, you can expect to be on your own and not get support as easily as if you were running it on a regular PC.
If you can't afford to keep up with CS upgrades, then you shouldn't be considering a Mac because there are more paid upgrades on that than on Windows 7, it's like a annual nightmare.
IMMO your still better off on a decent, 1920 x 1080 res, matte screen, removable battery (with extras), Win 7 Pro i7 machine (Pro+ runs XP programs) which will stay like it is and get security updates until 2020.
OS X changes every year and if you don't upgrade, + all your third party software, then about 3 years later your left behind for updates.
Also you will have to buy Win 7 to run on your Mac, the OEM disks won't work.
If your trying to budget, then a Mac is certainly not for you.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

ITunes 9 - Using 'Home Sharing' between Windows and Mac libraries

I have my main iTunes music library stored on my Windows 7 PC. It is currently around 200Gb in size, so pretty large.
I want to be able to use 'Home Sharing' in iTunes 9 to access this library on my Macbook over my home wireless network.
I don't, however, want to copy the music files themselves over to this laptop, but simply access the library over the network, and play them via either iTunes 9 or Front Row.
I would appear that the Windows and Mac 'iTunes Library' xml files are incompatible. I can't 'Alias' the Windows library on the MacBook for this reason. Does 'Home Sharing' eliminate this problem? Is there a way of accessing the library on the Windows PC without copying all of the files over to the MacBook?
I want to maintain a single library (which is often changing with new podcasts etc), rather than 2 libraries which I have to keep in sync.
Does anybody have any ideas on this one? I'm sure I am not alone in having this problem.
Here's hoping...:)

Welcome to the Apple Community arifbangash.
So far as I can tell you have settle homesharing correctly.
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Share iTunes libraries between Windows and MAC

Hi all i've an wifi via "Base AirPort" i've an HD shared between MAC and Windows sistem via the BASE, the iTunes library that i've stored in the HD is non redable for iTunes on Windows because it need an *.itl file...
How can i share an iTunes library between Windows and MAC???

I would like to report back that after struggling for months to get Tune Ranger to work that it is complete rubbish. The first time I tried to sync my libraries (between an empty iTunes library and my existing one) it created duplicates all over the place in my library and generally made a huge mess of everything. The support person (who I suspect is the only person over there) gave me some guff about my id3 tags being corrupt but it was clear that every song that appeared in a playlist was getting duped. Once I fixed this (many weeks later) I tried a one way sync after fiddling with the preferences of Tune Ranger to try to make it work, but it simply wouldn't.
I don't know if anyway has had success using TR where they are also trying to sync playlists, but if you have, I would certainly like to know what you settings are.

As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down

Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>

Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:

How to setup a network setup with an airport extreme card in a mac pro

I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
I would have thought that the two networks would be detected automatically.
Please some advice to solve this problem
Imac G5; Mac pro Mac OS X (10.4.4)

You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

Hard drive networked through Time Capsule for Windows and Mac

My previous setup was using an old Dell laptop with Windows XP to network share both my Samsung laser printer and my Seagate GoFlex 2 tb drive formated to NTFS, and all Windows 7, Windows 8, and OS X 10.6+ machines in the house were successfully able to connect to both. My wife replaced her old Macbook Pro she got in 2008 and decided to get a Time Capsule as well to backup her iMac and new Macbook Air. I decided to take advantage of the "features" of the Time Capsule, and hubbed the single port, just as I had done with the old Dell. After installing Bonjour on the Windows 7 machines I was able to share the printer just fine, however I'm still unable to share the drive for some reason.
The Airport utility on both the Macs and Win 7 machines see the hard drive in utilities, the box in Airport for file sharing is checked, guest access turned off, secure disk sharing with device password, and workgroup matches my workgroup. However the hard drive still doesn't appear. I tried formatting it to FAT32 based on some older forums posted in 2008-2009 range, but then realized the hard drive is too large for that, and I'm not looking to have a bunch of smaller partitions. I tried exFAT, but that failed too. Now I'm back to NTFS, but still with the issue that none of the machines recognize hard drive via the Explorer/Finder.
The Time Capsule is functioning as a backup with Time Machine for her Mac's, but I'm looking to use the external drive connected more as a media center storage and storing selected individual files (think networked thumb drive/USB stick) from my machines.

Put the seagate drive onto the Mac and format it Mac OS extended journaled. (HFS+ for short) and you will also need to change the partition over to GUID from MBR.
TC has very limited formats it can recognise.. FAT32 and HFS+ (well FAT16 but that doesn't count). exfat no, ntfs no, Really with FAT32 being hopeless.. you have one choice .. HFS+.
The Windows machines can handle files to the drive just fine.. because it is a network drive.. it is offered to the network as SMB protocol.. in windows it will look like NT server. The precise format of the drive is irrelevant and is handled by the firmware of the TC.
But do reset the partition scheme to GUID.. not MBR.
http://support.apple.com/kb/ph5845
You can even put 2 or more partitions on it.. but only one is fine.

Airport Fast on Windows than Mac

Similar Messages

Maybe you are looking for