Airport icon in OSX menubar is showing the connected time

how do i disable this?
it didn't show when i was connected using other wifi access points.

thanks... and the solution is
If you click on the menubar icon, and hover over the network you're connected to, a submenu will pop up, one item of which is the "show time connected" option. It's checked, so just pick it again and the time will disappear
---------

Similar Messages

  • How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    How do I change the settings on my ipod so that it plays continuous music.  Right now, it plays the same song over and over, even if I select the shuffle icon.  It used to show the continuous play icon, it doesn't anymore.

    Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
    -Messymeese

  • Keyboard and lightning of my macbook doesnt work, neither does the usb keyboard work. I need to reinstall osx as its showing the folder with a questionmark. Any suggestions?

    I've got a Macbook Pro 13" early 2011. The keyboard and its lightning doesnt work, neither isnt working anymore. I need to reinstall osx as its showing the folder with a questionmark. An USB keyboard doesnt work either.. Any suggestions?

    Restart.
    Try this. I know you said "keyboard is not working.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • How to show the processing time taken for a BPEL process in BAM report.

    Hi All,
    I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
    instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
    1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
    1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
    This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
    In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
    How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
    Regards
    Jude.
    Edited by: user600726 on Sep 30, 2008 1:30 AM

    I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

  • I can not restore my Iphone 3gs i can turn it off an on but itunes cant connect because i have a lock on it but at the same time it shows the connect to itunes screen

    I cant restore my iphone becasue its locked an it keeps showing the Connect to itunes screeen

    Hello louii23,
    Try reconnecting it in Recovery Mode as described in this article.
    http://support.apple.com/kb/ht1808
    B-rock

  • How can I get Messages to show the correct time for read receipts?

    Messages in Mountain Lion shows the wrong time for read receipts. For example, my iPad will show a message was read at 3:37 pm but if I open Messages on my MacBook, the read receipt shows the time that I opened the Messages app as opposed to the time the message was actually read. This is not too much of an issue if my iPad is handy, but really, shouldn't Messages on my MacBook be able to show the correct time the message was read? It syncs all the other infromation with Messages on iOs.
    I should mention that if Messages is running on my MacBook when the recipient reads the message, then it does show the correct time the message was read. It's if Messages was not running and I re-launch it that the read receipt time gets mixed up.

    HI,
    As far as I am aware Messages marks or time stamps an iMessage at the time of receipt rather then the time you got around to reading it.
    I will admit that in most cases reading and receiving as the app opens will be near enough the same time in some conversations.
    Adding Time Stamps to Chat is what iChat has always done particularly with AIM based Chats.
    The "Sync" in Messages is "display on all devices"  and after that each iMessages is dealth with separately on each device.
    There is no syncing of deleting/dimssing an iMessages or having read it on another device.
    8:58 PM      Tuesday; April 16, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • My ipad is showing the connect to itunes and will not move from there.

    After trying to update my ipad. I recieved an "unable to update" error message. Now all my ipad will do is show the connect to itunes symbols. I cannot get is to restart or restore. itunes is not recognizing the ipad.

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • My iphone 3gs has started showing the wrong time  and date. All was fine until this afternoon when it changed.  My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

    My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed...  to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time.  The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time.  The phone can not find my time zone any more.   The only fix I found was to turn off the automatic setting for time.  What is  happening? Ideas?

    just sorted mine went to
    settings-mail,contacts,calender-timezone support
    then turned it off then on tapped time zone and typed london
    this did sort mine

  • News feed on my Facebook app doesn't show the correct time. Can the time be set?

    News feed on my Facebook app doesn't show the correct time.  Can the time be set?

    Does your phone show the correct time?
    If not, change the time on your phone, see if it helps.
    If it does, then sign out, sign back in. If that fails, the delete and reinstall. If that fails, then contact Facebook, as they're the developers of the app and will have the proper documentation to help you further.

  • Music scrollbar doesn't show the correct time

    I have this really annoying problem on my Ihone 4. It doesn't happen all the time though. I always listen to audiobooks en aometimes when I have to take a call or whatever it will restart from 00:00 this is not the problem but when I then want to use the scrollbar to fastforward to where I was it will show the wrong time so basically the audiobook is normally 18:54 but when I scroll to 18:40 it will just be at the beginning of chapter 1. This is really annoying because you have to keep relistening to the first chapters.

    I've had FCP lock up on me several times.  The cause seems to always be 1.  That I've got a ton of unrendered stills in the timeline, 2. The project is rather large, with a lot of old sequences.  FCP can only access so much ram.  Stills are only virtual media clips until you render them, but FCP had to create them and hold them in a cache until you do render them.  FCP remembers, IN ACTIVE RAM, every cut, transition, every sequence whether active or not, every filter used, audio levels, all the clip info itself-- and a bunch of stuff you or I will never know.
    When you start reaching the limits of what FCP can handle, wonky stuff starts happening.

  • XFCE's Clock shows the wrong time...

    XFCE's clock shows the wrong time constantly (it always shows the GMT time), but whenever I run hwclock -r, it tells me the correct time. Can anyone help fix it?

    Well, I think I found what was wrong at last. It seems that the timezone wasn't set in the rc.conf, even though the TZ variable was set. I changed it, but will have to restart in a bit to see if it works.

  • How to keep Nano showing the elapsed time of song?

    Hi,
    I'm trying to figure out how to keep the page that shows the elapsed time / time remaining on instead of flipping back to the album artwork in 10 seconds. I need this function. any help would be appreciated.

    I don't think you can, sorry. But I have emailed Steve and sent feedback to Apple to fix various issues: http://www.apple.com/feedback/ipodnano.html

  • How do I get it to show the date & time.

    How do I get it to show the date & time at all times. I don't want to have to click on the day & time to get the date. In the OS 10.4 I could at least get it in the "analog" format. Under leopard it just show a little clock that can't be read.
    I just want to see the time and date at all times in the upper corner on the screen

    Please see my post in your first posting at http://discussions.apple.com/thread.jspa?threadID=1237022&tstart=0
    David

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • When I create a Calendar Invite .... Example 3:00 ... the email the invitee receives says 7:00 pm GMT but when she accepts is shows the correct time of 3:00pm.   How can this be fixed so the email and calendar are in sync?

    When I create a Calendar Invite (Example 3:00 pm EST) ... the email the invitee receives reads 7:00 pm GMT.   But when she opens her calendar the time is posted correctly.   How can I get the email and calendar to show the same time?

    Internally, all calendar items are based on GMT... That's how you can send an invitation to someone in a different time zone, for a conference call, for example, and end up on the phone at the same time even though you may be many hours apart by the clock...

Maybe you are looking for