AirPort into Time Capsule?
I have a time capsule without a wired internet source. I live in a rural environment and only have 4G Wifi Hotspot available for my internet. I'm willing to dedicate a phone (unlimited 4G data) as my internet source device. However, I want to use the TC as my home interface (connection) method. Can the AirPort Express receive my Hotspot and route, or bridge, it as my TC source ethernet connection? I've looked a the Pepwave Mini and it seems to be able to do it but I'd prefer to stay with an Apple-to-Apple solution.
I envision leaving the phone on with Hotspot enabled and always physically located next to the Express and TC. All internet users would only connect to the TC. The Express would be hardwired to the TC. (I have a MacBook Pro if I need to configure anything)
Will this work?
Can the AirPort Express receive my Hotspot and route, or bridge, it as my TC source ethernet connection?
In theory, yes. But, you really won't know if this will work to your satisfaction....or at all....until you try.
You will need to configure the TC to "create a wireless network". That is the default setting for the TC, so it should only take a moment or two to assign a name to your wireless network, add a password, etc.
If you buy from Apple, you have a 14 day no questions asked return privilege on the Express.
Let us know how things go.
Similar Messages
-
Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?
I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
Any help would be greatly appreciated.Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule xxxxxx
AirPort Utility will suggest a setup, which you want to ignore
Instead, click the Other Options button
Select the Create a new wireless network setting and click Next
In the Network Name box, enter the exact name of your Archer wireless network
In the Base Station name box, enter a name that you want to use for the Time Capsule device
Uncheck the box to use a single password
In the Network Password box, enter the password for the Archer wireless network
Verify on the next line
In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
Verify on the next line
Click Next and wait while the AirPort Utility creates a network
Ignore the step about unplugging the modem and click Next
Do not enable the Guest Network option and click Next
Wait while the network is being set up. When you see the message that the wireless network is available, click Done
The Time Capsule will now appear in AirPort Utility with a blinking amber light
Click on the Time Capsule icon, and then click on Edit in the next small box that appears
Click the Network tab at the top of the window
Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
Click Update at the lower right and click Continue
Wait a full minute for the Time Capsule to restart and you should have a green light
It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption. -
Airport Extreme (time capsule model) internet speed EXTREMELY slow.
Hello, first thank you for any help on this as it is a bit frustrating for me.
I recently noticed my internet speed was running significantly slower on both my MacBook Pro and on my wifes MacBook.
I had my ISP come and check out the problem. They hooked my MacBook Pro directly to the modem and my speed went from under 1 mb to over 5mb.... he then had me hook up directly to the lan port on the airport extreme and my speed was once again back down to the 1 mb range. He concluded that it must be a problem with the speed once it hits the Airport Extreme.
He ended up giving me a different modem, its a 2wire wireless. I have since connected my airport extreme to the new modem and am still pulling down the same speed, but now I have connected directly to the new 2wire wireless modem and am getting my 5 mb speed.
Can anyone give me any help or advice on what I can do with my airport extreme time capsule so that I can get the speed I should be getting from it.
Thanks again.More information. I have a separate router for ISP connect/DHCP. I only use my Airports to create a WDS and bridge onto my home network. I have never allowed 2.4GHz or 5GHz phones in the house, just to limit interference. I live way out in the country so interference from neighbors is negligible to nonexistent. Speed testing done with Speakeasy.net/speedtest
I moved all the hard wired machines from the TC to my switch. Which will impact the speed of my backups, but it helped with internet throughput for those machines.
Then I split my WiFi into 2 separate nets, each with a connection to my home network switch. I created a b/g network with my ufo Extreme and my Express (NET 1). I left my TC set for n/b/g (NET 2). As long as my MacBook was powered off internet speed were nice and fast. As soon as I turned on my MB the speeds were impacted, not as bad as before.
I then changed NET 2 to be n-only 5GHz and retested. These was a small but noticeable impact for wireless machines but I have concerns because my ISP is wireless and runs at or near 5GHz.
I then changed NET 2 to be n-only 2.4Ghz and retested. Again a small impact for wireless machines whenever my MB was connected to NET 2.
I then had my MB join NET 1 and speeds were nice and fast all around. My solution, shutdown the wireless on my TC and use it as just a network drive while I use my old reliable b/g hardware for WiFi.
Maybe someday this Draft version of 802.11n will be finalized and have no issues.
Message was edited by: Gregory Daniel -
i just bought a new mac air and the new airport extreme time capsule im would like to know how to use the time capsule as storage for my pics and videos as the mac are has low storage space can any one walk me through this process?
See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to.. -
new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.
See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to.. -
I have an AirPort Extreme Time Capsule wifi router and I just moved to a new house and I need to relocate the device without losing any of my old backups from my old mac as well as my new Mac! I could really use some advice on how to do it without any problems! I really appreciate it!
Physical location has no bearing on anything, since you're also moving your network and all other devices. Just plug everything in and it should work just as it did before.
-
I am a first time user of the new airport extreme time capsule 2TB. I use a macbook pro and imac. I installed the router today and got on wirelessly. BUT I cannot get my 2 printers that were previously wireless to find the router signal. The worked fine on my current set up OS Mounitain Lion 10.8.4. Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue. Any help appreciated.
birdmanjay wrote:
... Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue.
Arguably, they're both right.
Changing your router changes everything, so your best course of action is to research the respective printer's documentation and determine how to reset them to factory default condition. Then, add them again using System Preferences > Print & Scan.
For that, I recommend you first "reset the printing system" according to these instructions: Mac OS X: How to reset the printing system. Its instructions for Lion are identical to those for Mountain Lion.
As the article states, it will remove all your existing printers, leaving the Mac's printing system in a similar "factory default" condition ready for you to create a new print queue for each printer, which you should probably do.
Apple's printing support documents contain a great deal of redundancy, but this one may be a good place to start: OS X Mountain Lion: Set up a printer to print wirelessly -
I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??
Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage. -
2TB airport extreme time capsule says it's 'full'?
I am unable to complete a time machine back up to a 2TB airport extreme time capsule because it is 'full' - what is going on? I thought time machine automatically deleted the oldest back up so there is always room? Also I don't understand how I could fill 2TB? Thanks!
That's what I thought too. Just tried again & I get "Backup Failed - there isn't enough space on airport". When I click on 'details' it suggests I "Select a larger backup disk or make the backup smaller by excluding files." Any suggestions?
-
Airport extreme time capsule. Wifi dropping
I have an airport base time capsule 3rd generation with 2 airport express as range extenders. Up until recently the network worked very well. Lately the wifi keeps dropping. One moment I'll be on wifi, the next ill be on 3G, then back again. My apple tv keeps dropping on and off as well. It's been my experience with other routers that they have a somewhat limited life. I'm wondering if it's time to upgrade to the 5th generation. Since the time capsule feature works fine, can I still use that as the backup while getting a new base? By the way, all software and firmware has been updated
It says you have the wrong password.
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
Reset the TC to factory and start again.
But do not be surprised if the v5 utility no longer works to do the setup. -
Can we backup from iPhone and iPad into time capsule?
Can we backup from iPhone and iPad photos and data into time capsule?
iOS devices like the iPhone and iPad back up only to iTunes on your computer or to iCloud. More details on backups here:
http://support.apple.com/kb/ht1766
If you backup the iOS devices to iTunes, then iTunes in turn backs up to the Time Capsule using Time Machine. -
Apple Airport or Time Capsule with Telstra Air
Is it possible to use an Apple airport or time capsule (connected to the gateway) with Telstra Air enabled? I believe you have to disable the wifi when connecting a gateway to an apple airport which would prevent you from using Telstra Air. Has anyone tried this? Would like to have Telstra Air but don't want to give up the time capsule.
You can only get Telstra Air on the modems listed on this site
https://www.telstra.com.au/broadband/telstra-air/how-to-join
If you have one of the modems listed on that page it might work as Brizbrenz mentions, but if your modem is not on that page it definitely won't work -
How to change file ownership/permission on Airport Extreme Time Capsule
I have a 3TB Airport Extreme Time Capsule that currently have a folder with a number of files. The problem is it won't let me delete some of these files because I don't have permission. On a mac it would be trivial to either take ownership or change my permissions. Any ideas on how I can do this on the TC?
niblettes wrote:
I only know what OSX tells me -- so my information is only as good as its messages.
Locked files seem like a good possibility though.
Your first post seemed to say that some specific files couldn't be deleted. If you know any of their names, see if one is locked. if not, that isn't the problem. If it is, unlock it and try to delete. If it still won't delete, that's not the problem, either (or at least not all of it).
How can I just make all file unlocked since I have no idea which of the tens of thousands of file are at fault?
I know in OSX its easy to change permissions on a folder and then propagate that change to all child foders and files. Does locking/unlocking work the same?
If you don't know of any specific files, try creating one, locking it, then seeing if you can delete it.
There doesn't seem to be any way to unlock all files in a folder.
Do you want to delete everything on the TC? If so, just erase it with Airport Utility -- only takes seconds.
EDIT: These files wouldn't be in Time Machine backups, would they? If so, you can only delete entire backups via the Finder, not individual files or folders. But the message OSX usually sends when you try that says so fairly clearly.
Message was edited by: Pondini -
New AirPort Extreme time capsule to replace current AEBS
Is there a simple way to do this. I want to replace an old AEBS with a new AirPort Extreme time capsule. Do I have to create a new network? I'm not really extending the network, I'm just replacing the base station. If I use the exact name of my old wireless network and the exact password, will all devices abe ble to automatically connect to the new base station? Should I expect any trouble connecting to the pre-existing modem that the other base station was connected to? I'm hoping to avoid calls to the ISP and/or Apple and many hours of lost Internet time. Thanks
Hello there, Michael.
The following Knowledge Base article covers the basics for setting up the Time Capsule:
Setting up Time Capsule for the first time
http://support.apple.com/kb/HT1178
Additionally the Setup Guide has some great additional information if you want:
AirPortTime Capsule Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdfmanuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_80211ac_s etup.pdf
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I wanna get a new airport express or time capsule, I'm leanin towards the time capsule but in wanna know If I plug my USB printer into it if it becomes an AirPlay printer so I can print from my iPad
Nope. It's got to be a real AirPrint printer.
However, you may be able to use an app and print the way you described. Check out printopia.
Maybe you are looking for
-
I realize that appending to a text file has been covered on a few other discussions, but I am new to JSP and I am in dire need of assistance. What I am trying to do is append to a text file a tab delimited string that is coming from a form submission
-
Can't scan (HP All in One) with my MacBook
My HP All in One scanner works fine with my iMac desktop, but I can't get it to work with my MacBook. The device scans (but says "Enter Fax Number") but won't transfer the scanned sheet to the desktop. Thanks for any suggestions!
-
Moving Clips One prel file to another
How can I move a group of clips from one PrE 9 file to another? I want to create a new video, but only certain portions. Can anyone advise? Thank you, Stan
-
Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"
Hi All, I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't g
-
Other colors than white for docking station?
Hello, A strong point of the Docking station for iPod is that it can be connected to a HiFi-system. But most of these beautiful Hifi-component-systems are black. Now , it would be very nice (and would look very sophisticated) to put my Ipod (in its d