Airport is asking a password

I'm trying to configure for the first time an airport express as an extension of a Time Capsule and when entering the airport utility to configure it is asking me for a password.
I'd tried "public", the mac addres, the serial number .... and is not working .....
Thanks in advance for your help
Regards
Jordi

I tried also and not working
Thanks for trying to help ¡¡¡

Similar Messages

  • Airport keeps asking for password

    My airport keeps requesting a password to join my home wireless network.  Any ideas? Thanks

    Goofy01 wrote:
    trying to connect to wi-fi with new iPhone; keeps asking for password to my airport, but I don't think I have one?
    And, how would we know if you have an AirPort?

  • Airport Utility asks for Password for Airport Extreme. Whaaa?

    Found "Airport Utility" at Apple site today, and updated from "Airport Admin. Utility."
    To do anything, it requests a password. Never had one or set one up for the Airport Extreme.
    In Airport Utility, I tried resetting it and using "public" as the password, but that didn't work. I tried reconfiguring it and establishing the password through Airport Admin. and that didn't work.
    At Airport Utility, it says I need to update from firmware 5.6 to 5.7, but I"m not sure if I'll just be mucking up the works if I can't go beyond the opening window without a password.
    Anybody know how to work around this problem, please?

    I suggest that you perform another "hard" reset of your AirPort Extreme Base Station (AEBS). It may take a few tries to make it "stick." This type of reset will erase the wireless encryption password and reset the base station administrator's password to the default: public.
    If you are still being asked for a password and "public" does not work, you may need to go into the Keychain Utility to erase any previous passwords for your AEBS.

  • New airport extreme asks for password during set up

    Got a new Airport Extreme for my Macbook pro and it asks for a password to set it up. Tried "public" but does not work. Did a hard and soft reset and still nothing. What else can I do?

    A "soft" reset should disable all the base stations passwords for up to five minutes so that you could change them using the AirPort Utility. Is this not the case with yours?

  • Airport utility asks for password every time?

    I have to enter my password every time I use the Airport utility. I enter it and exit the app and as soon as I click on it again I have tomre-enter the password again!
    I tried to reset the AirPort Extreme and iPad. It works fine with all my iPhone and Mac. I tried to delete the app and reinstall it. No joy!

    Try the following on your MacBook Pro, in order, until (hopefully) resolved:
    1. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    In the windows on the left side: Select login for Keychains and "All Items" for Category.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

  • Airport utility asks for password after factory reset of Airport Extreme (spaceship), Why?

    Hi,  I recently replaced my Airport Extreme (the older model shaped like a space ship, 802.11 b/g) with an Airport Express.  I tired to move the spaceship to a different room in my house to extend the wireless network, but it was not being recognized by the Airport Utility (v5.6).  So, I did a factory reset of the spaceship.  Now I can see it in Airport Utility, however when I try to configure it, the Airport Utility prompts me for a password.  It will not accept "public" as the password.  Any ideas?  Could keychains be the problem?  This is a 2009 MBP running 10.8.3.

    Great! Thanks for the update.
    Out of morbid curiosity I went to my Mountain Lion Mac and downloaded AirPort Utility 5.5.3. I confirmed it will not install on Mountain Lion using OS X's usual package installer, but using the technique that follows I was able to install and run it on Mountain Lion. The only thing I could not verify is its ability to administer an older AEBS since I no longer have any to test.
    The remainder of this post is for those who are willing to circumvent Apple's desire to use only current versions of AirPort Utility for reasons known only to them. Proceed only if you accept this as an unsupported workaround strictly for the purposes of administering an older Extreme on a newer Mac.
    Prerequisites: A package extractor like Pacifist or unpkg will be required. Pacifist is shareware, unpkg is free.
    Download Pacifist here: http://www.charlessoft.com/
    Download unpkg here: http://www.timdoug.com/unpkg/
    Download AirPort Utility 5.5.3 here: http://support.apple.com/kb/dl1390
    Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
    After the .dmg file finishes downloading double-click it to mount the volume containing the metapackage. Control-click it and select Open With > Pacifist from the contextual menu:
    You will get the following dialog:
    The "unidentified developer" in this case is Apple. Click Open to open Pacifist.
    Click the "reveal triangles" until you see AirPort Utility.app and select it.
    The next steps are important.
    Select Extract To... from the toolbar as in the above screenshot. In the dialog that follows, choose Desktop since otherwise you will overwrite your existing, newer version of AirPort Utility in your Utilities folder which should not be deleted. Restoring it may not be trivial.
    Authenticate, allow Pacifist to extract the app, then you can quit Pacifist.
    You will now have AirPort Utility version 5.5.3 on your Desktop. Before you attempt to copy it to your Utilities folder though, be sure to rename it accordingly:
    You can then drag it to your Utilities folder. Authenticate, and you will have it alongside later versions where they can peacefully coexist:
    Use the newest version AirPort Utility to administer current production AirPort Base Stations, and older versions only as necessary for older AirPort Base Stations that cannot be administered any other way.

  • I changed my password on Airport Express and now can't connect in iTunes. It does not ask for password ,I just see trying to connect and it fails. How do I enter new password in iTunes when it just keeps trying to connect ?

    When I select the Airport Express as Remote Speaker in Itunes I just see trying to connect and it can't connect.
    I changed my password on the Airport and I don't see where I can put in the new password in Itunes.
    This problem is on my Imac. On my Mac Pro a window came up asking for password to connect because it was the first time.
    I can connect on the Mac Pro but not my Imac.

    Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
    but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

  • Each Airport device asking for non-existant password

    My network consists of 2 AEBS and 2 AEs. There is no network password at the moment.
    I just opened up Airport Utility to check a setting and when I double clicked on my main AEBS it asked for a password. I checked every device. They are all asking for a password which doesn't exist, before allowing me to even see the configurations. This happened before with an AE that I was trying to reset, the only way around it was to hook the AE to my mac with ethernet. I really don't want to have to do that every time I want to make a change to my network. Anyone know what's going on here? The same thing happens if I click on Manual Setup or Continue.

    I live on a dirt road with very few neighbors. I would notice if someone parked on the road
    in front of my house. Plus, why would anyone want to change the settings on my airport?
    Also, the passwords it was asking for were not the passwords I had assigned to those airport devices and saved in my keychain. They were some kind of default factory setting passwords.
    Anyway, none of my airport devices is asking me for a password now in order to see their configuration. And I have changed security over to WPA2.
    Message was edited by: pputnam

  • My Airport card ask me a WPA Personal password ??

    My internal airport card ask me "WPA Personnal" password : what is it ? Where find it ?
    Wep key i've one ...
    Mic

    Are you absolutely certain your existing wireless network is configured for WEP and not WPA security? If it is configured for WEP, then the box prompting you to enter the password should allow you to choose WEP as the security protocol that should be used.

  • Trying to hook up preowned airpoirt extreme. asking for password for selected wireless device.  would there be a password from previous owner?

    trying to hook up preowned airpoirt extreme. asking for password for selected wireless device.  would there be a password from previous owner?

    A "hard reset" will do the same thing.
    Make sure that the AirPort Extreme is powered on
    Hold in the reset button for a few seconds and the amber light will begin to blink more quickly. Keep holding the reset button when you see this for another 4-5 seconds and release
    Allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
    Open Macintosh HD > Applications > Utilities > AirPort Utility and click Continue to follow the guided setup

  • Airport Extreme username AND password for wifi connection...

    How can I connect to a wireless network that requires both a password AND username with an Airport Extreme?
    Some wifi areas in the UK such as BT Openzone homehubs require both a username and password to connect to the network, not just picking a network and add a password.
    Can anyone help?
    Thanks!

    Thanks, this solved my problem. Network kept demanding username; I guess it's different from the computer ID I use. Whatever, it wasn't easy to find the network listed, but by trial and error, I found it, highlighted it, and pressed delete key. Now the network only asks for password, which I knew, and I'm on. Great advice. But why computer was configured to do that in the first place is why I prefer PC to my wife's inscrutable macbook pro.

  • Hi I can't update my apps when I try to update it asks for password when used it goes back to update. I think I'm not alone and have tried changing date switching off signing out and in and rebooting. Is there a solution or do I need to take it in?

    I can't update my apps each time it asks for password when entered it goes straight back to update. I don't think I am alone in this. I have tried changing the date, rebooting, switching off and on signing out and nothing works. Does anyone know of a solution or will I have to take it to an apple shop. My misses has no trouble with her updates, they are both on iOS 6. Hope someone can help.

    Tried that just said cant connect to iTunes Store which was different.

  • Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

    not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

    okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
    if you are to do this please back up first with Time Machine. You can do this with a usb drive.
    Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
    Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
    once it is open go to the top of the window and put your email address that you are having problems with.
    once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
    right click and delete them. make sure not to touch any other files that dont say them things on them.
    Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
    Hope this helps. if something is not clear just ask.

  • SharePoint 2013 - Asking for password with NTLM

    Hi All,
    We have deployed a web application using NTLM with single sign on. It’s a secure site and in IIS bindings we have SSL certificate attached with this web application. However, many users are keep getting windows authentication prompt as shown:
     There are lot of blog posts that solve the issue by adjust IE settings >> Security >>
    Sites >> Advanced >> and added the site URL and
    Security
    >>   Local Intranet >> Custom Level >> At bottom choose “Automatic logon with current username and password”
    http://blog.fpweb.net/sharepoint-credentials-prompt-quick-tip/#.VPBz3vmUdUW http://www.sharepointdiary.com/2012/04/sharepoint-keeps-asking-for-password.html
    https://sysadminspot.com/windows/google-chrome-and-ntlm-auto-logon-using-windows-authentication/ (IE, Chrome, Firefox)
    http://social.education.purdue.edu/edit/2011/03/sharepoint-pw-prompts/
    I have tested the blogs posts and change the settings in our development environment
    and no windows authentication was shown with my username on the SharePoint 2013 environment. But, all related to change IE settings. In our organization, we have around
    2000 users. It be impractical to set for users for these IE settings and network team regularly pushes group polices.
    Q: Is some configuration has to be set on IIS or
    some settings on SharePoint that users don’t get windows authentication? I have tried most of options but could not resolve this issue.
    Any pointers would be greatly appreciated.    
    Cheers,    
    Aroh Shukla

    Sites go into the Intranet Zone, not the Trusted Zone. Only Intranet is configured, by default, to automatically pass credentials to SharePoint.
    Yes, there are scenarios where this may not work, e.g. if you've configured the Web Application with Kerberos but didn't configure the SPN. Or if you're using Kerberos Constrained Delegation with Domain Controllers older than Server 2012 and your users are
    in a different forest, etc.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I forgot my icloud id and password. i want to delete the id. i forgot the password. if i try to delete the account its asking for password. i cannot find how to delete the account. Please anyone can help me out???

    I forgot my icloud id and password. i want to delete the id. i forgot the password. if i try to delete the account its asking for password. i cannot find how to delete the account. Please anyone can help me out???

    You aren't going to be able to delete it without the correct password.  If it's your ID, you can reset the password as explained here: http://support.apple.com/kb/HT5625.  If it isn't your ID, you will have to get the password for the person who owns the ID.  There's no way around this and no one else can help.

Maybe you are looking for