Airport issue after update - Status grey / Connection OK - Solved

Hello All,
Just wanted to share an issue I had that was driving me nuts, and then the final solution.
Ever since the recent airport extreme update, my airport status has been broken. The menubar icon has shown up as grey / no signal, and when I click on it, the only option I have is to 'turn airport on' which when selected does nothing.
In spite of this, though, my airport connection for my preferred network is working fine - I just can't select a new network off the list (there is no list, even in internet connect)
This has been a problem since the airport extreme update. Nothing I did seemed to help. Finally, I called apple and spent 45 minutes on the phone with them, doing the obligatory pram resets and power management resets, etc. Nothing seemed to help. We found a way to enter networks manually (go to system prefs / network / airport and add your network there) but the status problem was still there.
After I got off the phone, I went to the apple support page and found the airport extreme software update and downloaded it manually and installed it.
Manually Downloading and Installing the airport extreme update again solved the problem.
I don't know why the software-update version didn't quite work, but installing the update from the website did solve the gray / broken airport status menubar problem.
Just thought I'd share that with everyone, as it's been driving me nuts for the better part of a week.
Cheers!
JayK
Macbook Pro Mac OS X (10.4.8) 2G ram

I would like to confirm that update worked for me too. Actually, I didn't need to do it manually like some of you did. It worked straight away after automatic software update.
My problem was occasional inability to connect to my wireless router. The problem would have been solved by SSID change manually on the router and reconnection.
After the latest update, everything is working flawlessly.
I have (not so known) OZENDA router and didn't have Parallels installed.
MacBook Pro C2D 17'' 2.33GHz   Mac OS X (10.4.8)  

Similar Messages

  • MacBook Airport Issues After Update

    Hello. After performing the most recent Software Update, my wireless Airport in my MacBook has been acting erratically. I never had these problems with it before the update and I know it's not the router because other wireless notebooks don't have the problem.
    ISSUE: Airport often begins scanning in the middle of an online session without any reason. It then interrupts the session causing a hang while trying to visit other web addresses. It's as if it lost signal and began scanning again. Yet, my signal is always full. Before the update, I NEVER lost signal and never experienced any interruptions. I have verified and repaired all disk permissions. I have reset the router to no avail. Has this happened to anyone else? Does anyone have an idea what can be done?
    Thank you.

    Same problem! I hope there is someone here who can help us? After updating the recent "firmware" from apple, I've been having connection issues. It's strange...I get a full signal from my airport, but when I scan to find it in Airport Utility it cannot be found. My wife has another Macbook same os, but did not update the "firmware"....guess what?...all fine with her connection to airport. So, I'd have to say it might be an update issue....you think? What can I do? God, someone help....

  • Logic Remote issues after updating to iOS 8, problem solved!

    Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
    After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
    Navigate to the following directory on your desktop system running GarageBand:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    In the Preferences folder should be a file named "com.apple.garageband10.cs”.
    Make sure GarageBand is not running and delete the  "com.apple.garageband10.cs” file.
    Relaunch GarageBand and see if you should now be able to connect.
    The same can be done for Logic by navigating to:
    ~/Library/Preferences/
    And deleting "com.apple.logic.pro.cs" and restarting Logic.
    Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality)  but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

    Note: Removing the CS (Controller Surface) plist is a part of the basic troubleshooting procedures for Logic Pro (and GB)
    See section #8
    Logic Pro X: Troubleshooting basics

  • Syncing issues after updating to 10.3.1.55

    After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

    I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something.  I think the error even states do a restore to fix it.  Last night that is what I did, clicked restore and then had it transfer all my items back.  I'm glad I had just synced my phone prior to the update so the restore was really current.

  • Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

    Hi everyone
    I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
    After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
    Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
    TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
    I am seriously thinking to switch ISP or phone.
    Anyone did experience same problem / found a solution?

    Hi Raia.D,
    Welcome to the Support Communities!
    The first thing I would suggest is to restart your iPhone.  Then tap the Settings app, and you should see Cellular listed on the main settings screen.  You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
    Here are some additional troubleshooting steps to try:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Judy

  • Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

    anyone had similar issue and or a fix?

    issues after update
    Download and install new drivers from the Epson site for your printer model.
    Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

  • "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

  • Safari, App Store Issues after updating to 10.7.2

    I have been running my imac that came preinstalled with Lion
    I am having this wierd issue after updating to 10.7.2 recently
    When i run Safari, App Store, Itunes, i can see its loading..
    but after 2 hours its still loading.
    It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
    Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
    What could be the reason?

    I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
    I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
    Scott

  • Logic Remote connectivity issues after updating to iOS 8 (solved!)

    Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
    After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
    Navigate to the following directory on your desktop system running GarageBand:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    In the Preferences folder should be a file named "com.apple.garageband10.cs”.
    Make sure GarageBand is not running and delete the  "com.apple.garageband10.cs” file.
    Relaunch GarageBand and see if you should now be able to connect.
    The same can be done for Logic by navigating to:
    ~/Library/Preferences/
    And deleting "com.apple.logic.pro.cs" and restarting Logic.
    Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality)  but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

    Thanks very much!  This solved my connection problem.

  • Anyone having LTE connection issue after updating to 8.0.2.?

    After updating my iPhone 5S to 8.0.2, I can no longer connect my phone to LTE but my iPhone 6 plus is fine. Anyone having the same issue?

    Loner T wrote:
    From Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
    The Health app won't work in iOS 8 after these steps. It will be fixed in our upcoming iOS 8.0.2 software update.
    Last Modified: Sep 25, 2014
    There is no IOS 8.0.2 out yet. There is no patch for iPhone5s.
    This update is specific for iPhone6/6+ as indicated
    Download the file below that corresponds to your device:
    iPhone 6
    iPhone 6 Plus
    8.0.2 is out.  But if it's true that 8.0.2 is only for iPhone 6 or iPhone 6 Plus, WHY would it appear on devices that aren't 6 or 6 plus?  I have two 6 phones and the update went fine.  But the update also appeared on our iPad's, which I downloaded and that went fine as well.

  • Bluetooth connectivity issues after updating to OS X 10.10.3

    I have been experiencing issues with bluetooth mouse connectivity (apple magic mouse) after updating OS X to 10.10.3. My Macbook Retina 15" pro (early 2013) keeps losing connection with the mouse. Switching the mouse on/off helps in re- establishing connection between the mouse and the laptop for a few seconds. I was under the impression that this update of Yosemite was intended to rectify bluetooth and wifi connectivity issues. Any suggestions/advice welcome.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.Bluetooth.plist
    Right-click or control-click the line and select
              Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Bluetooth connection issues after update

    Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3?  I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

    Hi, joshzik.  
    Thank you for visiting Apple Support Communities.
    I understand that you are experiencing issues with various Bluetooth devices and your iPhone.  Sometimes pairing the devices again can resolve the issue.  However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
    Get help using your iPhone, iPad, or iPod touch with your car stereo
    http://support.apple.com/en-us/HT203412
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    -Jason H.

  • Lion - TM issues after update

    After updating to LION My timemachine started to give me huge issues.
    i tried all possible solutions but my TM on Lion does not want create a backup. It has in a week backed up everything but it wont creata a usable sparsebundle . It keeps on ejecting the disk. After clearing the V100 index file seems going better but it still does not create a usable file. The repair disk did not show any issues .  going pretty much insane.
    I was able to use an external with USB without issues. But the NAS Synology DS207+ running their latest firmware on it that is supposed to work with Lion over LAN is creating the problem.
    Tried wirelessy , same issue.
    My Network has Airport express extreme. the macbook is connected though directly to the router via LAN while the NAS to Airport via LAN. this setup worked before on Snow leopard.
    Couple of TMbuddy codes lines:
    Starting standard backup
    Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Warning: Bytes to copy estimate was negative (-75305038)
    100.0 MB required (including padding), 519.35 GB available
    Waiting for index to be ready (101)
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “objects.xib” couldn’t be opened." UserInfo=0x7fbd3adbfa70 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSUnderlyingError=0x7fbd3c1245c0 "The operation couldn’t be completed. Input/output error"}
    Stopping backup.
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “keyedobjects.nib” couldn’t be opened." UserInfo=0x1096ddfa0 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSUnderlyingError=0x1096c7fa0 "The operation couldn’t be completed. Input/output error"}
    Backup failed because the network destination disk was ejected or disconnected unexpectedly!
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-34) SrcErr:NO Copying /Applications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib/object s.xib to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/0D01FF21-79B2-4A6F-BBC8-58EAA4FF5ECD/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copied 90669 files (34 KB) from volume Enrico.
    Error wri
    Starting standard backup
    Network destination already mounted at: /Volumes/Macbook Backup Syn
    Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb3df60 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
    Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb45670 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb490e0 {MessageParameters=(
    Ejected Time Machine network volume.
    Giving up after 3 retries.
    Backup failed with error: 31
    Starting standard backup
    Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Warning: Bytes to copy estimate was negative (-3853366630)
    100.0 MB required (including padding), 496.41 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-34) SrcErr:NO Copying /System/Library/Frameworks/Accelerate.framework/Accelerate to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/E6213496-605C-48CB-AFB9-60C935297EEB/Enrico/Sy stem/Library/Frameworks/Accelerate.framework
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copied 86208 files (1003.7 MB) from volume Enrico.
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Copy stage failed with error:28
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
    Backup failed because the network destination disk was ejected or disconnected unexpectedly!
    Backup failed with error: 26
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -153; status: -35; dissenting pid: -1)
    Error i get:
    Time Machine couldn’t complete the backup due to a network problem.
    Make sure your computer and the backup disk are on the same network, and that the backup disk is turned on. Then try again to back up.

    I am sure that there are other users that have had problems since updating the iOS. Have you totally reset the iPad up as a new device - not from a backup - and you are still having the issues?
    If you have done so, have you tried closing all apps? Then when you start using apps - if the iPad works OK up until you launch a certain app - it may be that particular app is cursing the issue. And BTW, have you updated all of your apps since you updated the iOS?
    Closing all apps .....
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Airport issues after 10.6.7 upgrade

    I have a MacBook Pro and after update to 10.6.7 (combo) I'm having a very unstable connection through Airport Express.
    Sometimes when it happens I just get my wife's Macbook (10.6.5) and on her MB everything is ok, same thing using my iPhone, works fine, but my MBP cannot connect on internet but keeps connected over my home wireless network. So a workaround is turn airport off and on, but this works for a while and the issue comes back!
    Sad, very sad!

    After installing the combo update, did you repair permissions and restart your computer?
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations: Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
    Message was edited by: CMCSK

  • Lumia 1520 Battery Discharge Issue After Updating ...

    After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
    Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
    When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
    However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
    Steps I've Taken:
    Soft-reset
    Full factory-reset
    Moved all apps off microSD card (this improved situation maybe 5%)
    Disabled almost all background app use in Battery Saver
    Replaced microSD card when I thought this was a memory write/read issue
    Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
    My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
    Other reported cases:
    Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
    Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

    Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
    Attachments:
    Battery drains fast.JPG ‏147 KB

Maybe you are looking for