Airport issues - help needed.
This problem began a few weeks ago. Occasionally (roughly 1 in 5 or 6 times) when I open my MacBook and it spins back up, the Airport card isn't working. I first noticed I wasn't able to get a wireless connection, then found I couldn't get Airport to turn back on. Until tonight, restarting the computer has resolved the issue. Tonight it did not, and after restarting I was getting a "No Airport card" message when I'd attempt to turn on Airport. I then powered down completely, powered back up, and it recognized the card.
This seems to be a gradually deteriorating issue, and I'd rather not spend the money to have a certified repair shop to do something I can do myself. My assumption is the Airport card is dying, but I don't want to assume that and spend money on a new card if there's a decent chance the issue is something else.
Any experience or input? Any opinions about the best place to buy a card for my model Macbook (info below).
Thanks in advance.
Specs: Macbook - black (MB063LL/B) // Late 2007 Santa Rosa chipset // OSX 10.6.7
Is there anyway to load the orginal software back on the Express without being able to connect to it?
No
Have you tried temporarily connecting via Ethernet to the AirPort Express (AX) to configure the AX?
Similar Messages
-
DVR/STB/Remote issues - Help Needed
New to Verizon FIOS (Installed about 2 weeks ago). Have a few issues. Any help is appreciated
1) When im on the Home Media DVR and i fast forward through a program, when i stop or hit play, an extremely loud beep that lasts for 1-3 seconds comes from the speakers. How do i get this to stop, what is causing it, etc?
2) When i fast forward from one of the STB (regular HD box), if i hit FF once, it fast forwards pretty slow, if i hit it again, it goes somewhat faster. The problem is. When i hit it that 2nd time, it seems that 70-80% of the time, it jumps me back to an early portion of the program. I.E. Was watching the 2 hour episode of "24", was one hour and 20 min in, got to commercials, i hit FF twice and it jumped me back to 23 minutes in. Tried again at next commercial break and it jumped me back to 11 minutes in. What is the deal here? How do i fix it?
3) Are there only 2 fast forward speeds on STB? I came from Brighthouse that had 4 speeds, im a little disappointed with only 2 speeds. Can anyone verify?
4) The remotes seem to take 2 seconds or so to register when performing any function other than changing channels. When i hit FF or REW, DVR or Last, it seems to take a few seconds to kick in. Is this a known issue, or possibly my box or remotes?
Thanks for any and all helpSorry the ff speeds are the same. On the main MR-DVR there are 3 ff speeds, where the remote STB has 2 ff speeds. I think they did that because how the remote system works, it has slower responses being remote. But with the update you will not need to worry about the ff, because you will not get the hub error. I was one of the first people to get the update and I have not seen the hub error yet.
As far as a time frame I don't believe there is any thing public about it, I think the only thing they have said is it is going to be rolled out per market, and one market a week. But nothing on the order of the markets. -
Ipod Touch: My Issues, help needed as fast as possible
Well recently i got an Ipod Touch 2nd Generation for christmas, and i must say i love it. But i have got some serious problems. 1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again :S. Yes that is as bizarre as it sounds. Sometimes it will work fine and i can use any of my apps whenever i like. But frequently(more frequently as time goes on) the applications dont open, i touch them they open the background for the app and they take me back to the main screen. I have tried the following: reseting the iPod, restoring it to factory settings, uninstalling apps and then re-installing and this issue is resolute. I also happen to know that some other 2nd Generation Touch owners at my school have the very same issue. I have seen some threads dotted about explaining their issues that are similar to this, meaning its fairly widespread.
My second issue is really bugging me, i opened the itunes store for the first time on my iPod(i never get any of my music from itunes normally i detest the application.) and all of a sudden it downloaded a podcast without me telling it to. It was called Podhead: The DoorWhores Off to vegas. This is something i really do not wish to have on my iPod. So i synced it to my windows OS and tried to re-sync the iPod's podcasts with my library so that it would dissappear. But it didn't, i then tried setting it to manually putting files on my ipod and alas it doesnt show up in the podcasts sub section of the device. I tried playing the podcast and it takes me to the home screen of my ipod with the Play triangle flickering constantly in the top right of my ipod. I don't know what is going on with that but i havnt restored it to factory settings after this issue, mainly because my iPod refuses to accept that i own all of the apps i have backed up and i have no desire to manually re-download them to my ipod.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Any help with these issues would be much appreciated. I am in desperate need of assistance before i come to the end of my tether and resign myself to a long trip to the nearest apple store. thanks in advanceSanga wrote:
1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again
Did you try to restore your iPod to factory settings and add your apps one by one to find out which app causes the crash? Try not to restore from a backup it may contain the corrupt parts you don't want to install again.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Deauthorize and authorize your computer in iTunes, here's how to:
http://support.apple.com/kb/HT1420 -
SQL Query Sorting Order issue - Help needed
Hi All,
I am using the following query in my project to display the records in the grid.
/* Formatted on 04-09-2013 PM 8:01:51 (QP5 v5.149.1003.31008) */
SELECT eol,
status_msg,
relation,
building_name,
device_id id,
CEIL (SYSDATE - updated_date) duration,
lab_id,
aisle_id,
aisle_location_id,
ip_address,
port,
slot_num,
hostname,
pid,
description,
sl_num,
eitms_code,
status,
dnd_flag,
aisle,
aisle_location,
spname,
os_version,
user_id,
TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
isterm_svr,
net_type,
DEVICE_GROUP_REF,
cmd_id_ref,
LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
AS testbeds_id_ref,
LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
AS testbeds_names,
spname || '-' || ip_address || '-' || port AS child_asset_group
FROM DEVICE_TESTBED_VW
WHERE lab_id IN
('7099849',
'10769617',
'4258712',
'10513562',
'10515074',
'5882676',
'8330925')
GROUP BY eol,
status_msg,
relation,
device_id,
lab_id,
aisle_id,
aisle_location_id,
ip_address,
port,
slot_num,
hostname,
pid,
description,
sl_num,
eitms_code,
status,
dnd_flag,
aisle,
aisle_location,
spname,
os_version,
user_id,
updated_date,
isterm_svr,
net_type,
DEVICE_GROUP_REF,
cmd_id_ref,
building_name
ORDER BY building_name ASC,
LOWER (child_asset_group) ASC,
LOWER (relation) DESC
The problem is , if any one sorting with any column , the order is not correct
In this below code , i have done sorting by port . But the result data order is not correct .
/* Formatted on 04-09-2013 PM 8:07:02 (QP5 v5.149.1003.31008) */
SELECT eol,
status_msg,
relation,
building_name,
device_id id,
CEIL (SYSDATE - updated_date) duration,
lab_id,
aisle_id,
aisle_location_id,
ip_address,
port,
slot_num,
hostname,
pid,
description,
sl_num,
eitms_code,
status,
dnd_flag,
aisle,
aisle_location,
spname,
os_version,
user_id,
TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
isterm_svr,
net_type,
DEVICE_GROUP_REF,
cmd_id_ref,
LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
AS testbeds_id_ref,
LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
AS testbeds_names,
spname || '-' || ip_address || '-' || port AS child_asset_group
FROM DEVICE_TESTBED_VW
WHERE lab_id IN
('7099849',
'10769617',
'4258712',
'10513562',
'10515074',
'5882676',
'8330925')
GROUP BY eol,
status_msg,
relation,
device_id,
lab_id,
aisle_id,
aisle_location_id,
ip_address,
port,
slot_num,
hostname,
pid,
description,
sl_num,
eitms_code,
status,
dnd_flag,
aisle,
aisle_location,
spname,
os_version,
user_id,
updated_date,
isterm_svr,
net_type,
DEVICE_GROUP_REF,
cmd_id_ref,
building_name
ORDER BY PORT ASC
Can some one help me to fix this issue?Hi,
Sorry, it's not clear what you want.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. For example, if you really need to GROUP BY 28 columns, post a problem where you need to GROUP BY only 2 or 3 columns. (Just explain that you really have 28, so people will give solutions that are sure to work for all 28).)
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
Wi-Fi Connections issues: HELP NEEDED!
I've been running my iPhone mostly on the EDGE network the past few weeks. Some hair might have gone grey while I was waiting for it to laod, but it loaded after sometime.
Anyways, I have a linksys wireless router and everytime I try and use my Wi-Fi with the iPhone it says "Safari can't open the page because it could not connect to the server."
Does anyone have a solution for me to change settings through network settings, or anything eles that might be quick and easy?Here is a quick check list you can take a look at and try. As well as a couple questions. It sounds like possible interference of some kind.
1. Has Firmware on the router been updated?
2. Have you updated iPhone Software to 1.0.1?
3. Have you done a restore on the iPhone and tested the network again?
4. You may wish to inquire to your router provider about changing the channel on your router, To see if it is stopping the iPhone from grabbing a stable connection.
Test your iPhone on another Wireless Network, If other Wireless Networks work, Then it could just be a compatibility issue with your router, But please inquire to your Router Provider about how your wireless device will not hold the information of the Router IP and other information, They may be able to change a setting in the router to help stabilize the connection.
Apple has also released a new router, The Airport Extreme 802.11n
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=E84 08794&nplm=MB053LL/A -
AD OID Synchronization searchfilter issue (help needed)
Hi,
I am trying to Synchronize AD and OID. I am running into an issues where users are being populated both in groups and users containers in OID even though I specified my
searchfilter to put users under cn=users and groups under cn=groups. Following are the serch filters I am using and looks like it's not working. I want my users to be in cn=Users and groups in cn=Groups, but some how
I always keep getting the users being populated in cn=groups and cn=users.
Group filter:
searchfilter=(|(objectclass=group)(objectclass=organizationalunit)(!(objectclass=user)(!(objectclass=computer))))
User filter:
searchfilter=(|(objectclass=user)(objectclass=organizationalunit)(!(objectclass=group)(!(objectclass=computer))))Following are my Attribute Rules that I have both in group and user profiles:
AttributeRules
# attribute rule for mapping windows organizationalunit
ou: : :organizationalunit:ou: : organizationalunit
objectguid: :binary:organizationalunit:orclobjectguid: : organizationalunit:bin2b64(objectguid)
# attribute rule for mapping directory containers
cn: : :container: cn: :orclContainer
objectguid: :binary:container: orclobjectguid: :orclContainer:bin2b64(objectguid)
# attribute rule for mapping directordomains
dc: : :domain: dc: :domain
# USER ENTRY MAPPING RULES
# attribute rule for mapping windows LOGIN id
sAMAccountName,userPrincipalName: : :user:orclSAMAccountName: :orclADUser:toupper(truncl(userPrincipalName,'@'))+"$"+sAMAccountname
# attribute rule for mapping Active Directory LOGIN id
userPrincipalName: : :user:orclUserPrincipalName: :orclADUser:userPrincipalName
# Map the userprincipalname to the nickname attr by default
userPrincipalName: : :user:uid: :inetorgperson:userPrincipalName
# Map the SamAccountName to the nickname attr if required
# If this rule is enabled, userprincipalname rule needs to be disabled
#sAMAccountName: : :user:uid: :inetorgperson
# Assign the userprincipalname to Kerberaos principalname
userPrincipalName: : :user:krbPrincipalName: :orcluserv2:trunc(userPrincipalName,'@')+'@'+toupper(truncl(userPrincipalName,'@'))
# This rule is mapped as SAMAccountName is a mandatory attr on AD
# and sn is mandatory on OID. sn is not mandatory on Active Directory
SAMAccountName: : :user:sn: : person
# attributes to map to cn - normally this is the given name
#name: : :person:displayname: :inetorgperson
cn: : :person:cn: :person
# attribute rule for mapping entry and to create orclUserV2
# There should be a mapping rule with orcluserv2 objectclass
# without which the PORTAL may not function properly
givenName: : :person:displayName: :orclUserV2
# mail needs to be assigned valid value for default settings ing DAS
userPrincipalName: : :user:mail: :inetorgperson
mobile: : :organizationalperson:mobile: :inetorgperson
ObjectGUID:1:binary:user:orclObjectGUID: :orclADUser:bin2b64(ObjectGUID)
ObjectSID: :binary:user:orclObjectSID: :orclADUser:bin2b64(ObjectSID)
# GROUP ENTRY MAPPING RULES
#name: : :organizationalunit:ou: : organizationalunit
#name: : :container: cn: :orclContainer
#name: : :domain: dc: :domain
cn: : :group:cn: :groupofuniquenames
# displayname needs to be assigned a valid value for default settings on DAS
SAMAccountName: : :group:displayName: :orclgroup
# Description needs tobe assigned a valid value for default settings on DAS
Description: : :group:Description: :orclgroup
member: : :group:uniquemember: :groupofUniqueNames
managedby: : :group:owner: :orclprivilegegroup
sAMAccountName: : :group:orclSAMAccountName: :orclADGroup
ObjectGUID: :binary:group:orclObjectGUID: :orclADGroup:bin2b64(ObjectGUID)
ObjectSID: :binary:group:orclObjectSID: :orclADGroup:bin2b64(ObjectSID)Any help is appreciated. For example I see my userid being under cn=groups and cn=users both, even though I am user not a group.
ThanksHi WhiteSox!
I wounder if you ever solved this?
I guess that
Group filter:
searchfilter=(|(objectclass=group)(objectclass=organizationalunit)(!(objectclass=user)(!(objectclass=computer))))
User filter:
searchfilter=(|(objectclass=user)(objectclass=organizationalunit)(!(objectclass=group)(!(objectclass=computer))))
in both searchfilters you do search for the organizationalunit with a logical OR. as both users and groups can have this attribute they migth end up there.
I have to confess that I have struggled lately with the searchfilters as I am now on a AD-OID sync project.
cu
Andreas -
Responsive menu issue help needed
Need some help trouble shooting an issue I'm having with a responsive menu not working. Use this link to see the website: http://www.sherwoodcompanies.com/home
When I test the menu for the smallest screen width, the menu is converting to the menu button like it's supposed to, but when you click on it, it does nothing. I'm sure this is a super basic thing I keep overlooking, but I can't seem to find the issue. Any thoughts?No problem. We will figure this out. I am going to have you revert back to the way it was on a couple of things. Since this is foundation, I will study their docs a little and get this the way it is supposed to be. It has to be something simple.
Starting with the scripts.js file. revert back to the following.
Line 88 - $menuBtn = $('#menu-toggle'),
Line 89 - $navUl = $("#window"),
Line 107 - $navUl.toggle();
Foundation.css
On Line 1148 uncomment "overflow:hidden;"
On Line 1244 revertback to display:block instead of display:none;
I also want you to place your script files in the footer in this order. Also leave modernizer at the top in the header.
<script src="/_assets/js/vendor/jquery.js"></script>
<script src="/_assets/js/foundation.min.js"></script>
<script src="/_assets/js/vendor/fastclick.js"></script>
<script src="/_assets/js/scripts.js"></script>
This is the setup that it should be, but we know it still does not work. So I will look at it from another angle. -
I am in need of some quick help using Flex2. We are running a
Flex w/Coldfusion, and I have a master page (products) that opens a
detail page (product details) when you edit or double click a
product on the master page. The issue that is hindering our entire
process is, that the data shows up inconsistenly in the detail
page. Sometimes that data will show up in the detail page and
sometimes it will be blank for the same product. I used the
coldfusion wizard to set up the entire application. The weird thing
is that it works fine on my development machine, but when I moved
it to the test machine the issue started happening there. I then
installed FLEX builder on the test machine and did a build on the
test machine so that it would mimic my dev machine, however the
issue continues. ANY HELP WOULD BE GREATLY APPRECIATED!!
Thanks in advance,
AXK"dzinr38" <[email protected]> wrote in
message
news:gif80t$59p$[email protected]..
>I hope I can explain this correctly. I have a Flex
prototype in which I am
> using viewstacks. I have some components within these
viewstacks, and
> those
> components also contain viewstacks. So, if I have a
component that has 5
> viewstacks, and you click to another component, then
back to the component
> with
> 5 viewstacks, instead of going to the 1st viewstack of
that component, it
> takes
> you back where it was the last time you went to that
screen. I want to set
> it
> up so that each time you go to a viewstack it goes to
the default rather
> than
> the last screen you were on. Does anyone know how to do
this? I hope it
> makes
> sense. Thanks!
Use an event listener to listen for a change in the ViewStack
and then set
the child ViewStack index to 0.
HTH;
Amy -
Connecting external audio interfaces?! Issues, help needed!
Ok well basically i'v always used a pc to do music using cubase and a variety of hardware including a steinberg mi4 external audio interface connected via usb. Now on my pc which is actually less powerful than my new macbook (the 2.2ghz model) the interface works with out fault no latency, no distortion.
However once used on my new shiny macbook, for which i'v purchased logic pro as opposed to cubase (felt like a change) when trying to use my interface via usb on the mac through logic i seem to have issues with recording and all sound comes through distorted with a great deal of latency. I'v tried altering the sample depth and the bit rate and nothing seems to work?
I have downloaded mac specific drivers for the hardware so i'm sure its not a driver issue?
Anyone with any suggestion, cos i'm a bit gutted really?
P.s. Does anyone know if you can change the graphics card in a macbook?
BenHi, im having the same issue, using garageband and logic pro. I used pc to make music with no problems at all with my Zoom g9.2tt guitar fx usb interface.
Now with mac i get distorted and lots of latency.
One way i found that can make this work with garageband is use the internal sound card to play sounds and the usb interface to record this helps a lot. This trick makes it for garageband but not for logic pro(still getting distortion/latency).
By the way i used to have an emachines laptop with 512 ram memory and a 1,6ghz semprom processor, believe or not, easier to record on that one, with no latency and no distortion. -
IS07 Car Music Bluetooth Streaming Issue - Help Needed
I drive an Audi A1 which I have owned from new 11 months ago. I updated my iPhone 5 to the IS 7.0.4 around 1 month ago and since doing that I now have streaming issues in my car. The connection is via bluetooth, and the music is streamed from my iPhone, however since the update the music cuts out, skips and pauses............
I took the car to a service centre today where it was confirmed a known issue within the Audi network.
So how do we go around this? What do I need in order to stream music without the interference? I am pretty sure Apple wouldn't want to pay my car invoice for the added extras that I purchased in order for me to enjoy my music so surely there must be a way around this?
Any advice is greatly appreciated.
Thanks,This is not about law, it's about software/hardware. But since you're bringing it up, when Siri was introduced for the iPhone 4s, there was a man in a car using siri with his apple earplugs. I searched for law about this in my country (Netherlands) and it's not forbidden.
Now back to my issue: I want to use a headphone to listen to music and I want to make a call through bluetooth. Iphone doesn't remember I was listening to the music through the headphone. Issue, right? -
Hi there,
Okay, I've got a problem, well a few of them actually, and I really needed to get some advice from others. So, I'm doing an HNC in Interactive Media at the moment in college. My class isn't exactly the best place to study, as its quite loud, but yet it's the only room (available on certain days at certain times) that I can use to get my work done because it has all the Adobe software I need.
My problem is that the version of the software is only at CS4, which the exception of Photoshop CS6 Extended added in their too. Now, I have no clue as to why the software hasn't been updated and it's not causing me a bit of worry. I desperately want to my work outside of class, to work away from the noise where there is no distraction and so on. So, I had taken out a Student Loan to buy myself a MacBook Pro and I was dead-set on buying myself CS6. However, I quickly realized that CS6 wouldn't be backwards compatable with older versions, i.e. CS4, right?
So I asked my lecturer, she advised me to buy the Adobe CS4 software package, which I was fine with. I had spent the last few days trying to find a Mac version, with the student discount (Like I could afford the full retail as a student), but I couldn't find one trace of it. I was always redirected to some fishy website that was able to crack it for me, which I didn't want - obviously.
My problem is that I've seen on the community discussion that Adobe doesn't sell CS4 anymore - already I'm panicking - because I don't know what to do. I can only see the option of: buying CS6 and basically not being able to use it because my lecturers wouldn't be able to open any of those files.
Please, I really need some help here. If you have any advice or knowledge on where I could possibly buy CS4 (if that is even possible) or maybe a method of saving CS6 files as CS4 files?
Thanks,
AndrewAnd what program are we actually talking about? PS files are always compatible when saved with the "Maximum Compatibility" option, Illustrator allows back-saving to older formats and InDesign can save to CS4-compatible IDML (an exchange format). For other apps it's not really relevant - HTML is HTML and which version of Dreamweaver you use to edit it doesn't matter. Conversely, pretty much all universally accepted media formats for audio, video and images can be opened in most versions as can PDFs. That leaves only the video applications and Flash, but I can't imagine your teacher looking at your Premiere Pro project file when all you have to deliver is an edited movie nor do I think it would be particularly relevant how you created a Flash or After Effects file. All that aside, things are as they are - unless you can find someone trustworthy willing to part with his used CS4, there is no legal way to get it. It's a moot point, though, 'cos no matter what, it won't work properly on your shiny new Mac and may not even install, so you are in a very dark place, either way....
Mylenium -
Hi,
I am giving a user-defined java code below, which we need to change. I understod that the fucntion is used to store values in memory. But my doubts are something else.
GlobalContainer gc = container.getGlobalContainer();
AbstractTrace trace = container.getTrace();
int j = 0;
for (int i = 0; i < ConnectEAN.length; i++) {
if (ConnectEAN<i>.equals("__cC_")){
j++;
if (PremiseID[j].equals("__cC_")){
j++;
} else {
trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
gc.setParameter( ConnectEAN<i>, PremiseID[j] );
result.addValue("");
I need to know what ' equals("__cC_") ' means.??? whats the underscore doing there??
Also what does the below line doing?
trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
Why do we need to add info to the trace? whats is its concept?
Please help.
Thanks,
Johnhi John,
trace.addInfo("EAN = " + ConnectEAN + " Prem = " + PremiseID[j]);
This object enables you to transfer messages to the mapping trace. If the trace level is set correspondingly. then the trace is visible in message monitoring (transaction SXMB_MONI). The execution of the mapping is not interrupted when the entries are written to the trace.
so go to SXMB_MONI expend the tree and go to trace you can fond the corrosponding trace out there.
Trace object have the following Methods
1)void addInfo(String message); Adds a message message to the mapping trace with the trace level info.
2)void addWarning
(String message); Adds a message message to the mapping trace with the trace level warning.
3)void addDebugMessage (String message); Adds a message message to the mapping trace with the trace level debug.
regards,
navneet -
Very Weird Sleep Issues - Help Needed
Hey Everyone,
I've been having some really weird issues with my iMac G5 lately. It will randomly go into sleep mode. Sometimes it'll do it once every hour or so, other times it will do it every 30 seconds, there is no rhyme or reason to it. I've obviously checked all my settings and the iMac has recently been to the shop to fix something else, but this new problem has developed over the last few weeks. It never crashes or freezes, it will just go into sleep mode and when I press a button it will turn back on. Working with video, this becomes the slightest bit annoying while trying to edit and such. So any help would be greately appreciated. And just as a side note: the computer is all updated, I'm running 10.3.9, and I believe my iMac is first gen (I don't think its the power problem they speak of because mine was just in shop for that issue)
Thanks!Johnny, a SMU reset usually solves a number of power issues including sleep issues. If you go to this link it will detail all power problems. In step # 10 it refers to the SMU reset button and this is what you want to reset. The main part of the link is for when your Imac won't turn on at all, good reading but the SMU reset will probably fix your problem. Let us know, Bob :~))
http://docs.info.apple.com/article.html?artnum=300908
if your not familiar with opening your Imac go here
http://manuals.info.apple.com/en/imacG5allModelsBackCover.pdf -
Process Chain Issue Help needed!!!!!!!!!
Hi all,
Please help me in creating process chains, Requirement is
Process Chain1
Infosource --> ODS1 (Delta Load) From ODS1 --> Cube 1 (Delta Load)
Process Chain 2
from same above ODS1 --> ODS2(Full Load) and ODS2 --> Cube2(full Load)
What is the sequential flow?
I created the chain 1 as
Delete Index(Cube) > Infopacakge from Infosource to ODS1> Activate ODS1 > Update ODS1-> Generate Index(Cube).
For Chain 2
Delete Index(Cube) > Infopacakge from Infosource to ODS1> Activate ODS1 > Update ODS1->Activate ODS2 > Update ODS2> Generate Index(Cube).
My question is for Chain1 from ODS1 it should be Delta and for chain2 from ODS1 it should be full load,
i have chacked the ODS1(8ODS1) infopackages the full load infopackage data target is ODS2 and Delta Load data Target is Cube1.
Thanks in Advance,
Sudha.Below..i believe is a better design for the process chains..
Chain 1
Start variant> Infopacakge from Infosource to ODS1> Activate ODS1 --> Delete Index(Cube) >Update ODS1-> Generate Index(Cube).
(drop cube indexes just before cube gets loaded)
Chain 2
Start variant> <b>Infopacakge from Infosource to ODS1> Activate ODS1</b> > Update ODS1->Activate ODS2--> Delete Index(Cube) > Update ODS2> Generate Index(Cube).
(i think we can remove 2 steps(in bold)..right?ODS1 already got loaded in first chain..just we need to keep dependency that 2nd chain runs after the 1st chain has run)..
U can have a 3rd chain..a meta chain like..
start variantchain 1chain 2..
(for both chain 1 and chain 2..i mean the local chains...set start variant parameter as 'start using meta chain or API)..
doing so..chain 2 will kick off only after chain 1 is successfully run..
(also check if the process type 'further update from ODS to data targets..allows you to choose data targets..and choose full/delta..i doubt it..
if it doesnt allow..then place the infopackage steps instead of this 'further update' process..i have done this earlier..)
Vishvesh
Message was edited by:
Vishvesh Bahirat -
Hey guys i got BlackBerry Curve 8300 when i open camera i getting error
uncaught
exception:
java.lang.arrayindexOutOfBoundsException
plz help how to fix camera thankzHi,
1) GO TO OPTIONS/ADVANCED OPTIONS/HOUST ROUTING TABLES/menu key/REGISTER NOW.
You will get an email registration verification it will not go to your email account.
2) Send service books either from the BIS site or from your device. You will get an email verification
on your email address.
3) Pull the battery for 1 minute and then replace. Let the device boot for 1-3 minutes.
Try the function.
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
Opening a Dashboard widget causes runaway swap, eventually eating all of the free disk space. I started the Activity Monitor after having problems and rebooting. I ran Mail, Safari, Google Earth, Numbers, and other apps without a problem. Swap wasn't
-
Can I type a large document on my iPad2 or only small amounts of text using Notes?
Can I type a large document on my iPad2 or only small amounts of text using Notes?
-
BAPI BAPI_OUTB_DELIVERY_CREATE_STO cannot work in BAdI DELIVERY_PUBLISH
Hi Experts: In BAdI DELIVERY_PUBLISH Method PUBLISH_AFTER_SAVE. I called BAPI BAPI_OUTB_DELIVERY_CREATE_STO to create a new delivery when PGI for one exist delivery by referring to a PO. I test this FM in SE37 and it has no problem, but in the BAdi
-
How can i take Basic price value as Net value in sales order
Hello SD experts, I have constructed a pricing procedure, and in that have taken condition type for basic price as rate (cond. type= Price) and have another 3 condition types as surcharges for some internal calculation (but i have to show them in pri
-
What is OEM_sqlplus_input_finished used for?
During recovery of my database just for testing purpose I got such error: Prosz� poda� dziennik: {<RET>=sugerowany | nazwa_pliku | AUTO | CANCEL} ORA-00308: you can't open archived log 'OEM_sqlplus_input_finished' ORA-27041: can't open file OSD-04002