Airport Locks with non-Apple Bluetooth Mouse

I have an iBook 12" G4 1.33GHz 1.5GB RAM, internal Airport Extreme, Bluetooth, etc.
I have tried several non-Apple Bluetooth mice and they create the same problem: Airport stops working and when I put the mouse pointer on the menubar Airport icon it turns into a spinning disk. I have looked in the log files but can't see anything useful. I have to reset the computer to get it to work properly again. If I use an Apple bluetooth mouse this does not ever happen. I am trying to use the same Logitech mouse that I have used perfectly well for over a year on my Apple Mini G4.
Any ideas anybody?
Nick
SW England
All sorts Mac OS X (10.4.9) 4 bits are in a nibble

Try configuring your base station to operate on a different channel. Change the channel until you find a channel that works better or you run out of channels.

Similar Messages

  • Really slow and jerky cursor with my apple bluetooth mouse, can you help?

    hey.
    i have the apple bluetooth mouse and keyboard, they were working perfectly (keyboard still does) until they ran out of batteries one day. i reverted to the wired set up and (lazily) didn't get batteries for a while (month or so). When i did the keyboard responds as before but the mouse is painfully jerky and slow. i have re-paired the mouse and changed the batteries twice, it is so annoying i now use the bluetotth keyboard and wired mouse. any advice/suggestions gratefully recieved.
    many thanks.
    james

    it is so frustrating isn't it. i now sit looking at the bluetooth mouse whilst getting tangled up in the cable of the wired mouse!! i was going to buy the new wireless mighty mouse hoping that that would solve/bypass the problem but reading what you have all put is definately making me wary of that. it seems so simple doesn"t it, nice uncluttered desk, pretty foolproof technology. if only... seems that no matter how clever these things get they are still not smart enough. i have been looking elsewhere for solutions but no luck as of yet, if i find any i'll let you know.
    regards,
    james

  • Does a non-apple bluetooth device such as a mouse need a dongle with Mac MIni?

    I have just ordered a referbished Mac Mini. I know the Apple Bluetooth Wireless Keyboard does not need a dongle, but I am curious if non-Apple bluetooth devices such as a mouse need one?

    No, they do not need a dongle. They can use the built-in BT

  • I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

    I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit.  Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How can I connect Bluetooth in iPad retina with non apple devices ?

    How can I connect Bluetooth in iPad retina with non apple devices ?

    What devices?
    The iPad can only pair with earphones, speakers and keyboards.
    It cannot directly pair with other phones or computers for file transfer or other operations.
    Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
    From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair. 

  • Using an Apple Bluetooth mouse with a pc

    Is it possible to use the Apple Bluetooth mouse with a pc and windows XP using WIDCOMM. I've tried to connect mine and although the pc sees the mouse, it tries to pair using a security code. This is despite the fact that it later says a security code is not required! Anyone got any experience of this?

    Problem solved. Security code 0000 entered, mouse paired with pc and everything worked beautifully.

  • HT204387 iphone5 bluetooth won't pair with non apple devices.

    iphone 5 won't pair with non apple devices.

    Not sure what your trying to connect to via bluetooth, but here are the supported files http://support.apple.com/kb/ht3647

  • Airport Extreme won't work with non apple products?

    this is a recent problem after years on working ok.

    You have not given us enough info to say anything. you haven't asked a question.
    AE work fine as AP with non-apple clients.
    I have multiple phones and wireless devices from numerous brands working with AE and TC.
    What you might find is that naming of the AE has become more of a problem.. so you need to use SMB naming.. ie short, no spaces and pure alphanumeric, for the AE itself and the wireless SSID.
    You might also find the latest firmware upgrade did nobody any good. If your AE is the flat one, go back to 7.6.1 which IMHO works better.
    If your AE is old it could be just faulty.. it might need replacement.
    If you want to do things like wireless extend, then there are huge issues with mixing apple and non-apple wireless routers.. but that is not new.. it has been an issues since Apple routers came out.

  • Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min.  EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST  Click the [Support] links for help with non-Apple products

    Problem description:
    My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
    EtreCheck version: 2.1.5 (108)
    Report generated December 27, 2014 at 9:15:58 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HD (disk1) /  [Startup]: 498.88 GB (5.04 GB free) (Low!)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.ctkd.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.wdhelper.plist
      [running] com.seagate.TBDecorator.plist [Support]
      5 processes killed due to memory pressure
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
      [running] com.carbonite.launchd.carbonitestatus.plist [Support]
      [loaded] com.coupons.coupond.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
      [loaded] com.trendmicro.itis.dca.plist [Support]
      [running] com.trendmicro.itis.uimgmt.agent.plist [Support]
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist [Support]
      [running] com.carbonite.launchd.carbonitedaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.trendmicro.icore.av.plist [Support]
      [running] com.trendmicro.icore.main.plist [Support]
      [running] com.trendmicro.icore.wp.plist [Support]
      [running] com.trendmicro.itis.plugin.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
      [invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
      [loaded] com.trendmicro.itis.uninstaller.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
      WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
      npBcsMcTcIO: Version: Unknown [Support]
    Safari Extensions: ℹ️
      Trend Micro Toolbar [Installed]
    3rd Party Preference Panes: ℹ️
      Carbonite  [Support]
      Flash Player  [Support]
      Paragon NTFS for Mac ® OS X  [Support]
      Seagate Dashboard for Mac OSX  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      HD: Disk size: 498.88 GB Disk used: 493.84 GB
      Destinations:
      Jens Seagate Backup [Local]
      Total size: 999.86 GB
      Total number of backups: 6
      Oldest backup: 2014-06-24 10:33:56 +0000
      Last backup: 2014-12-17 17:14:18 +0000
      Size of backup disk: Too small
      Backup size 999.86 GB < (Disk used 493.84 GB X 3)
      My Passport for Mac [Local]
      Total size: 2.00 TB
      Total number of backups: 14
      Oldest backup: 2013-08-21 19:19:35 +0000
      Last backup: 2014-12-19 11:44:23 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          6% coreaudiod
          5% CarboniteDaemon
          4% iMovie
          3% JustCloud
          3% Wondershare Player
    Top Processes by Memory: ℹ️
      335 MB iPhoto Library Manager
      180 MB Finder
      142 MB iMovie
      70 MB Preview
      51 MB Microsoft Word
    Virtual Memory Information: ℹ️
      149 MB Free RAM
      1.04 GB Active RAM
      897 MB Inactive RAM
      1.17 GB Wired RAM
      30.53 GB Page-ins
      1.42 GB Page-outs
    Diagnostics Information: ℹ️
      Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
      Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
      Dec 26, 2014, 02:22:01 PM Self test - passed
      Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection

    I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
    Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
    Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
    I've done the following to fix the problem with no success:
    Reinstall Boot Camp 5.0.5033 drivers
    Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
    Unistalled both devices on OS X and reinstall them only on Windows 8.1
    Reinstalling both on OS X and reinstalling them on Windows 8.1
    Uninstalling all the drivers from the Device Manager and reinstalling them
    One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices.  I have tried removing the new devices but they keep reinstalling themselves.
    I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
    Has anyone fixed this?
    Thanks!

    Just to point out the "Bluetooth Collaboration" setting I've found this:
    Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
    And it is not enabled by default on some devices like on mine!
    http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51

  • My apple bluetooth mouse is not being recognized by my macbook air - and it was yesterday!

    My apple bluetooth mouse was working perfectly with my macbook air until I had to change the batteries.  Now it is not discoverable and I really can't operate without a mouse.  I tried another logitech usb mouse and that was not discoverable either.  Please help!

    Today, when I turned on my iMac, neither my bluetooth mouse or keyboard were recognized. I had to connect my old USB keyboard-mouse to type this message.
    And yes, I restarted my iMac, didn't help.
    Can someone help?
    PS: Barry, "resetting SMC" doesn't help

  • EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT  Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

    My Mac is very slow and applications take a long time to load, especially Safari and iTunes.  Please help.    I have run the Etrecheck report and these are results.
    Thanks Pat
    EtreCheck version: 2.1.5 (108)
    Report generated 4 January 2015 14:29:26 GMT
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (21.5-inch, Mid 2011) (Verified)
      iMac - model: iMac12,1
      1 2.7 GHz Intel Core i5 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:32:50
    Disk Information: ℹ️
      ST31000528AS disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5690H 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Seagate Expansion Desk 2 TB
      EFI (disk1s1) <not mounted> : 210 MB
      Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. iPhone
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
    Problem System Launch Agents: ℹ️
      [failed] com.apple.syncservices.SyncServer.plist
    Launch Agents: ℹ️
      [loaded] com.avast.userinit.plist [Support]
      [running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
      [loaded] com.epson.esua.launcher.plist [Support]
      [running] com.epson.eventmanager.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.trusteer.rapport.rapportd.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.avast.init.plist [Support]
      [loaded] com.avast.uninstall.plist [Support]
      [failed] com.avast.update.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [running] com.trusteer.rooks.rooksd.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.avast.home.userinit.plist [Support]
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      OVSHelper: Version: 1.1 [Support]
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: Java 8 Update 25 Check version
    Safari Extensions: ℹ️
      wrc [Installed]
    3rd Party Preference Panes: ℹ️
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoToMyPC Preferences  [Support]
      Java  [Support]
      Trusteer Endpoint Protection  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
      Destinations:
      Seagate Expansion Drive [Local]
      Total size: 2.00 TB
      Total number of backups: 78
      Oldest backup: 2013-07-28 18:09:06 +0000
      Last backup: 2015-01-04 14:29:38 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 281.84 GB X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          1% mds
          0% fontd
          0% mds_stores
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB Safari
      112 MB com.avast.daemon
      94 MB com.apple.WebKit.WebContent
      56 MB spindump
      52 MB mds_stores
    Virtual Memory Information: ℹ️
      479 MB Free RAM
      1.56 GB Active RAM
      1.11 GB Inactive RAM
      904 MB Wired RAM
      5.37 GB Page-ins
      75 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 4, 2015, 01:57:18 PM Self test - passed
      Standard users cannot read /Library/Logs/DiagnosticReports.
      Run as an administrator account to see more information.

    patbythesea wrote:
    Can I assume that with my Mac I do not need any additional virus protection software?  If I do, what should I use?
    See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Airplay not working with non-apple router

    I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
    The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
    I have another Express hooked to the network via ethernet and everything works fine with that one.
    Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
    thanks

    Factory reset the express, and try to make it join again...

  • Airport Express Extending non-Apple AP

    For something that "just works", the Airport series is a real mess if not every single device you own is the most recent Apple product. Thanks Apple.
    Anywho, before complaining too much, I'd like to set my problem.
    We currently have a main Airport Extreme (lets call it AEX) that is connected to some switches. We also have 3 Airport Expresses, for extending our network and AirPlay for 3 stereos throughout the house. Now, our outter most Airport Express (lets call it AE3) only receives a faint signal or none at all. So I set up a D-Link DIR-615 (lets call it DL) to work as an AP and extend our wireless network, to give the AE3 a decent signal. Now apparantly Apple managed to only let devices extend a network if the network that it is extending comes from another Apple router. Very nifty. Very user friendly. Since everybody uses all Apple devices. Practical.
    Of course D-Link != Apple, so AE3 can't extend the wireless signal created by DL (connected directly via LAN to AEX). However, I can set up AE3 to only receive the signal of DL. Works fine! No extension of the network unforunately - but at least it works.
    Now for the real issue - another Airport Express (lets call this one AE2) is also in the zone of DL. When the signal of AEX get's weaker or AEX is updated and offline for a second, it somehow pairs with DL instead of AEX. Since AE2 is set up to extend the network and not only receive - since that's what they are made for - this forms errors.
    Is there really no way to let it extend even if the signal they are receiving is from DL? I just can't understand how hard it can be. Since we have already been forced to buy a AEX along with our AE's (since we had no clue a full-Apple-network was required for AirPlay), I'd like to avoid buying yet another Airport Express to make a signal cross the room.
    Now that I'm ranting anyway, I'd like to express (no pun intended) my dissatisfaction with following issues Apple is causing.
    First off, the Airport Utility for Windows hasn't been updated in a long time. It isn't available on all versions of Windows either. On top of that, the new version requires iOS6/7, thus making a first gen iPad really not that useful for network configuration.
    Secondly, my compliments to Apple to not make the AEX support NTFS for external hard drives. BRILLIANT move there. I really do want to use FAT16/32 on a 1TB hard drive, so practical for my large files! No I kid, Mac OS Extended is of course better use for a hard drive that big, surely since all the computers in house are Windows. The joy's of using Apple products never ends does it! I understand they want to keep everything all-Mac, but selling routers one does expect somewhat compatibility with non-Apple stuff.

    Is there really no way to let it extend even if the signal they are receiving is from DL?
    Unless you want to use a wired connection between Apple and non-Apple routers the extend feature of Apple routers only works with other Apple routers. This is really no different with the other router manufacturers whether it is D-Link, Belkin, Linksys, etc.
    (since we had no clue a full-Apple-network was required for AirPlay)
    That's not entirely true. One of the requirements for AirPlay is a network, either wired or wireless. The networking hardware that makes up that network does NOT have to be comprised of any Apple products.
    For example, since AirPlay requires at least three things: 1) iTunes "server," 2) Network, and 3) AirPlay "speaker," you could have a fully functional AirPlay streaming with the following devices:
    iTunes "server": Synology NAS
    Network: A wireless network based on D-Link hardware.
    AirPlay "speaker: Denon AVR-991

  • Opinion on Mighty Mouse & Original Apple Bluetooth Mouse

    I just received my bluetooth Mighty Mouse today and I have to say it's an excellent mouse!
    Pros:
    Compared to the original Apple Bluetooth Mouse, this one is lighter (much lighter). It also tracks better than the original Apple Bluetooth Mouse. My desktop is a piece of grey plastic and with the original mouse, it was not able to track at all. With the new wireless Mighty Mouse, it works just fine!
    I also love how one can zoom in by control-scrolling. Excellent feature!
    Almost everything works well.
    Cons:
    Like others have said before, the one minor complaint is the side squeeze buttons. Only if the squeeze buttons were just slightly less tight. But I would not say this negative is any reason to not get the Mighty Mouse.
    Also, unlike the original bluetooth mouse which has a slider to adjust the pressure of the click button, this one does not come with that feature. Not a big deal, nevertheless.
    Good job, Apple!

    It's not for any help, but me too have the same problem.
    My mighty mouse, lose connection in a random way with my MacBook Pro 17" Unibody.
    I've an iMac at home, with another mighty mouse, so I try to exchange the two, but any one of the two mouse work right with the iMac and have the same problem with the MBP.
    Maybe for 1/2 day, there is no problem, and after that in an hour the lose connection happen 2/3 times.
    I try like you to delete the .plist file and reset PRAM but the only difference is that now the bluetooth icon in the menu bar correctly shows the three dots of the connection, but as always at random, the mouse stops working and the pointer remains stationary on the screen.
    The only solution is to manually disconnect and then click a button on the mouse to reconnect.
    My only hope is that with the arrival of Snow Leopard and the next "clean installation" the problem disappears.
    I'm sorry can't give you any help.

Maybe you are looking for

  • Can not update acrobat to 8.1.6

    Dear All, I have to upgarde all of my workstations to latest version of acrobate. Most of all are with the 8.1.4 version. Then I went to menu->help-> check for update and it upgade version by version. Then when I updated it to 8.1.5 and then I ran ag

  • Two Adobe accounts problem

    Hi, I hope you can help my with this frustrating problem. I have a Sony Reader prs-350, and have the Sony Reader software installed on my Mac. Recently Until recently I had been buying ebooks and downloading them on to an old computer using the Reade

  • REPOS indicator in Purchase Order

    Dear All, Do you know if it is possible to set up the PO type, that the indicator REPOS (Invoice Receipt) will be always not flagged?? (no invoice will be expected in this PO type) If this kind of setting is possible, where can I do it?? Thanks in ad

  • Connect Same BO server to Two BI system QBW and DBW

    Hello friends we are using same BO server to connect to two BI system DBMW and QBMW. we are not able to see the OLAP Cubes during the creation of universe connection using the Quality system QBMW and Application server "sapbmw01" client 100, system #

  • BOM and purchase prder

    hi is there a possibility to make a relation between BOM and purchase order, otherway, to create a purchase order with BOM? if not, for what serve BOM? best regard