Airport network connection comes and goes

I have a belkin N router and an iMac with an original airport card. For the past couple of months the airport will intermittently pretend the network doesn't exist. The router is 30 ft away so the connection is near 100% when it sees the network. When I try to access it manually by typing the network name in through "Other.." it refuses to recognize the network. I have completely cleaned the system software to no effect. Any thoughts very welcome. Thanks.
iMac g4 flat panel   Mac OS X (10.3.9)   800 mhz

I am having a similar problem to yours. I have done a clean install of 10.3 several times on my iMac 15" Flat Panel. When I boot up, the Time, Volume & Airport indicators on the right side of the menu bar take a long time (2min.) before they show up. When they do, the airport indicator is 'grey'. When I check Sys Pref - Networks, It says the airport is on but not connected to a network. Other menu bar items on the left boot up normally.
The airport was coming on intermittently so I decided to do a clean reinstall of 10.3, and I removed the bottom cover and re-seated the airport card. Since the clean re-install, all I get is a 'grey' airport indicator everytime.
I'm hoping someone responds to this string with some suggestions...

Similar Messages

  • Internet connection comes and goes

    My Macbook is hooked up to my husbands wireless network and used to go through the Time Machine but he had problems with it so he took it off the network. Now my internet connection comes and goes every 5 to 10 minutes - it loses connection and then finds it again.
    My husband (the computer expert in the house) doesnt really care so it is up to me to figure out what is wrong. Can anyone help me?

    I think by "Time Machine" you actually mean "Time Capsule"--TC is the hardware, TM is the software the does the backups to the hardware.
    As for your problem: If the Time Capsule is "off the network," as you suggest, how is your husband connecting to the internet? What kind of computer does he have? More information is better here, to help us solve your problem--the wires come into the house and then what?
    It kind of sounds like you might be describing "Internet Sharing":
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html
    Does any of that look familiar to you?

  • Ever since I installed Lion my internet connection comes and goes, has anyone else had the same experience. have rung Apple Care and they have reset my connection but it is still happening

    ever since I installed Lion my internet connection comes and goes....have reported this to Apple Care who have helped me reset my connection but it is still happening...cant believe it is a fault of the ISP as my Iphone does not have this problem, nor does my PC laptop...is this a fault in the new system?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Airport Extreme  - Printer Comes and Goes

    Gentlemen,
    adding a printer to my airport extreme was easy and it works fine. Untill I have to turn everything off for the night. When I start both the mac and the printer on again the printer disappears from the airport utility panel and I can't print anymore. To solve this, I have to unplug and then plug the printer in again to the airport base. Then everything is back to business.
    What can I do to have all this solved?
    Thank You!

    I think you are experiencing something that is know around these forums as "a known issue". I have the same issue with my iDisk (an external disk connected to the Extreme). But I found that instead of unplugging the disk (which is in the basement and I am normally upstairs), I can use the airport utility and just go through the routine of clicking through all the panes so that the Extreme restarts. Then the disk is there again.

  • 802.11n connection comes and goes with 10.5.2 update

    Running 10.5.2 with Mac Pro Quad Core and Airport Extreme base station on latest firmware.
    802.11n loses signal randomly (airport icon goes grey), all I have to do to get it back is act like I'm going to choose a new network (click on airport icon in the menu bar) and then let go of the menu without choosing anything and voila, back.
    802.11g works fine... if I switch the base station to b/g compatible no drop outs. This however, is not a solution in my book.
    No problems prior to 10.5.2

    Check this out before someone deletes it.
    http://discussions.apple.com/thread.jspa?threadID=1389855
    Also
    http://discussions.apple.com/thread.jspa?threadID=1428660
    and
    http://discussions.apple.com/thread.jspa?threadID=1231631
    I tried everything (and believe me my job is to sort out stuff like this). If someone brought back a machine like this to where I work I would tick a box on a form that says 'pre-loaded software fault' and send it back.
    I have gone back to Tiger as I cannot maintain a wireless connection or stop all my applications from randomly quitting etc etc etc. Of course a small minority have given me excessive grief for daring to state that this is apple's fault but hay ho.
    PS you are lucky if it always comes back as you have described. Imagine you had to reboot several times an hour. Windows 95 anyone?

  • Wireless Signal Comes And Goes

    I have T40p laptop and i'm having trouble keeping a steady wireless signal, it comes and goes. It will connect to my router for a minute then it goes away. Then it comes back, then it goes away this is beyond frustrating. When i use my high speed cable thats connected to my router my laptop works fine. I've downloaded 3 different drivers from the Lenovo site, these are drivers that a person on the phone told me to download. Is this a hardware or a software issue? Can someone please, please help??
    Solved!
    Go to Solution.

    You may want to change the channel that the router is broadcasting with.  I was originally broadcasting with channel 2 on my router (Linksys WRT54GL with latest DDWRT firmware) but I was getting sporadic drop outs with my X60s, the wife's Acer, my T61 and the mediacenter PC in the living room.  I was a bit confused and thought it might have been driver related but the problem seems to have just appeared out of nowhere and it affected both my XP and Vista PC's.  How could it affect all my computers if I have turned off auto update and have not installed anything new for quite some time? 
    I did a refresh of the wireless networks and found that since I last checked, there are a few more routers in my vacinity so I thought that they could be all interfering with one another and broadcasting on almost the same default frequency.  I started with channel 1 and finally worked my way up to channel 4 and none of my computers has dropped out for over a day now.  When the dropouts occurred, they would happen every 3 to 5 minutes, which was very annoying to say the least. 
    Message Edited by adwoodw on 06-18-2008 12:26 AM

  • I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery

    I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?

    If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board.  Charging/plugging in to a power source is very damaging to wet electronic devices.  There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
    You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again.

  • My screen looks like a green mesh has been placed over it. It is nearly illegible and comes and goes.

    my screen looks like a green mesh has been placed over it. It is nearly illegible and comes and goes. Nothing I do can remove it.  Does anyone have a remedy?

    You have a hardware problem and the only people/place that can fix that is an Apple store or AARP.
    So take it into your nearest Apple store or AARP.

  • Mac Pro 8-core Power Supply Making Humming Noise That Comes And Goes

    This is in reference to a Mac Pro 3,1 8-core purchased around Feb 2008.
    Lately, I've noticed a strange noise coming from my power supply that sounds like the noise a refrigerator radiator makes. It's a humming noise that rapidly comes and goes, constantly.
    The power supply fan speed is running at 599rpm
    I'm not sure if the problem could've been caused by adding additional ram (12GB, OWC) or an additional HDD (3rd HDD, WD), but I didn't really notice the noise until after adding these components.
    What could be the cause of this problem? What are my repair options if necessary (without Apple Care)?
    Thanks in advance.

    I know for a fact it is not any of my hard drives because the noise is becoming more frequent no matter what hard drive I use, I actually have a 1.5tb, a 1tb, two 500gb and two 320gb drives, I have set an appointment to take my system in and have it tested, it is starting to crash 5-6 times a day. I can not get a lot of work done with this annoying spinning noise and the shutting down. Thank god for my Apple care, and I have visited various forums that lead me to believe its the power supply going out, with the symptoms it is having. This article and others like it explain what to look for when a power supply is going bad.
    http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r07 04/24r04/24r04.asp

  • Strange Line In problem with my X-Fi Elite Pro. Stereo sound comes and goes

    I have an X-Fi Elite Pro with latest drivers installed. Everything works fine, except for the Line In port in Entertainment mode. I have an AverMedia TV/FM card and its audio output (stereo) is plugged in my X-Fi's Line In/Mic In (PCI). The problem is that I get sound only from the right channel but not from the left one, so the sound comes out in mono. From time to time, I get to hear in stereo (both channels) but it seems a random event. This input works just fine in Game and Creation modes btw.
    Stereo sound from this particular input comes and goes in random order and sometimes I get about 50% on the left and 00% on the right channel. Sometimes, left channel volume fades in and out slowly. I already did some troubleshooting such as set Line in/Mic In/Digital In to "Line In/Mic In", speaker diagnostics, checked it in Game & Creation modes, turned to default values and so on but I still get this problem.
    Seems pretty wired. A ghost in the machine! Creative products never seize to amaze us!

    Soo...your're calling me stupid? Well, perhaps your right, but then again, I might have a point!
    Read my post again.
    If you still think it's too low with SVM enabled and everything is turned up...then I'm affraid you're out of luck and might consider buying another speaker set, if it's a major issue to you.

  • 2 droid DNA's service comes and goes on one

    We have 2 droid DNA's and where we are on my phone the service comes and goes drops to no service most of the time. The other phone changes from 1x to 3x but doesn't drop service. I have reloaded my phone several times and entered *228 to get the local towers nothing seems to change it. Any opinions?

         Thanks for the reply and the additional info mcharette5470. Your patience is very much appreciated. Now let's turn our attention to the text messaging. May I ask are you experiencing this issue with every number that you text or is it a specific number? Also, how much available device memory do you have? Just for my piece of mind, may I have you share the Android and software version that you have installed so I can confirm that it is the most current?
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • IPhone sign comes and goes

    Hi,
    I have macbook air 2013, when I try to scroll down with right side scroll bar, iPhone sign comes and goes within a second. Can any body guide me what it is. It is all okay if I scroll up and down with mouse pad. I have attached picture to explain the thing. Thanks.

    Bump
    Any clue please??

  • The sound comes and goes with flash player

    The sound comes and goes on vidio's.  From u-tube, nbc, etc.  When the sound goes off the vidio it is like you paused it, when I didn't.  Any ideas what to do?

    Could this be your problem: http://forums.adobe.com/thread/1192612 ?
    [topic moved to Flash Player forum]

  • Sound comes and goes

    Why does my sound go off and sometime comes back on?

    If it happens randomly and with the total lack of information/details that you have provided, I don't think anybody here could have a clue why your sound comes and goes.
    Try resetting your iPad and see if that makes the sound more stable.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HDMI has static and comes and goes

    HP Pavilion dv7 Notebook PC, Windows 7 64, no error messages and no changes have been made to the system.  The sound comes and goes with a lot of static from both the HDMI and computer sound system.

    panamadn wrote:
    ...  If the problem requires the replacement of cards, please recommend the best for my system.
    Hi,
    Replacing sound card on a laptop is a costly business that means we have to replace the motherboard or even the CPU because the CPU may be soldered to the motherboard ....That work maybe more expensive than buying a new machine.
    My suggestion is to reinstall sound/audio driver and hope. Please use this:
        ftp://ftp.hp.com/pub/softpaq/sp41001-41500/sp41398.exe 
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Price Adjustment is not getting updated using OE_ORDER_PUB.PROCESS_ORDER

    Hi Gurus, I am trying to create a price adjsument at line level for SERVICE lines using OE_ORDER_PUB.PROCESS_ORDER, but it does not update/create. Please let me know the key pointers to accomplish this. OE_ORDER_PUB.PROCESS_ORDER(p_api_version_number

  • Report Similar to T.Code : MB5B

    Hi, Is there any Standard report that gives the same values similar to T.Code : MB5B. If there is no such Standard report apart from MB5B that shows stock as on a particular period with the stock movements. What are the tables that i can use, to buil

  • Burner stopped working all of a sudden!!!

    I tried to burn a cd today from iTunes and got this error: "itunes can't burn this cd because the burn speed is too fast for your cd burner or media." keep in mind i have not changed any settings since i last successfully burned a disk, and i have no

  • Hard disk not recognised - will not boot from cd & No FW Target Disk mode

    hi, some help would be greatly appreciated. Some time ago i was switching internal hard drives around and wound up with a kernel panic of some sort (see my previous posts). following on from this I have tried FW target disk mode with no success, and

  • Is it be possible to connect...

    Is it be possible to connect: VGA VGA VGA or  DVI VGA or DVI or HDMI USB X9 Headphones To a current MacBook Pro all at once thanks