Airport not available to Garageband

Why is airport not available in GarageBand on my wife's iPad? The AirPort connect is available on Music, but it doesn't hold over to GarageBand. Sliding the screen up from the bottom reveals volume and other settings but not AirPort as on my iPad.

In GarageBand settings, go to the bottom, enable airplay-Bluetooth

Similar Messages

Airport not available on MacBook Pro 15 unibody mid 2009, PLEASE HELP!!!!

Ok, so I just recently put in a new hard drive and battery by myself, since my original MacBook Pro hard drive became "corrupted" most likely due to a parallel desktop software I was using. Anyway so I finally install everything on the new hard drive and airport is not working. The icon is NOT EVEN THERE on the menu bar. I go into Network and the only thing I've got is Ethernet and Firewall. I've tried the "+" thing, and it didn't work. I then went into "Assist Me" , then "Diagnostics" and the airport option is greyed out, so is the external modem. Oh, and the operating system is Snow Leopard OS X 10.6.3. Has a 2.8 GHz Intel Core 2 Duo Processor.
I also deleted the "SystemConfiguration" Folder and found something interesting. The "com.apple.airport.preferences.plist" was never there and when I reboot, the "com.apple.network.identification.plist" also disappeared. I had to drag it back into the folder from the desktop where I put a copy just in case something weird happened, which it did.
I checked System Profiler, clicked on AirPort and it gives me stuff under "Software Versions", so I'm guessing it's acknowledging that THERE IS a card and can give me all the information for it, but I can't get the mac to use it. I reset the PRAM AND SMC and still nothin.
So, I figured it must be hardware, right? So I open the mac like i did when I installed the new hard drive and battery, and I CANNOT FIND THE DARN AIRPORT CARD. On the mid 2010 models it's with the bluetooth card at the top and I've tried looking online for ANYONE, who has tried to get to the airport card on the mid 2009 model for the MacBook Pro 15 unibody. And found nothing. I think it's in the clutch, but I'm too scared to touch that area. Does anyone else have any ideas or have I covered all my bases?
I REALLY DO NOT want to go to Apple. I don't have AppleCare and don't have the money to have them poke around and tell me the same thing I already know. And I spent way too much on this computer to not be able to use it to full capacity. PLEASE HELP!!!!!!

From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone

Loops Not Available in GarageBand

Help? My sons are anxious to get going with our new computer. We just got our new iMac, and when they open GarageBand, all the instrument loops are greyed out. When they try clicking on one, it tells us we have to "download and install." We go through the motions - still, nothing. It always goes back to asking us to to download and install. Am I doing something wrong?

I had the same question, and the link provided doesn't really answer it unfortunately.
My purchase of a Mac Mini came with iLife and Garageband pre-installed, but without loops. When the app directs to the system update there are no files to download. The simple answer would be to install them from the iLife disk however as this was pre-installed I was not provided with the iLife disks, just the Tiger disks and Leopard upgrade disk.
Whats the best way to get hold of these loops?

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

AirPort Utility 5.5.3 for Windows - Support - Apple works fine for me as well as a test.

Option to create a new airport network is not available.

My family has 4 new Intel core 2 duo imacs running OS X 10.4.8. Mine is connected via ethernet to a router, which is connected to the dsl modem. My system also acts as the airport connection for the three other systems which share my internet connection via the buitin airport wireless.
I want to create a new, more secure airport computer to computer network using high encryption, but the option to create a new network is not available. It's not in the airport menu from the title bar, it's not in network preferences, it's not in Internet Connect. I created a new location and it did not allow me to create a new airport network.
Any help would be appreciated. Thanks.

Well, depends a bit where you set it up, but I'd look in Internet Connect First, if you can't find it there then launch the Keychain Access app in Utilities.
Mounting a Network Share at startup is simple as pie...
Once it's mounted on the Desktop, open System Prefs>Accounts, click on the Login Items... drag the Network Share there!
Or, Sharepoints Automounter does it easily also...
http://www.hornware.com/sharepointsautomounter/
But the solution I prefer is to just drag the Icon to the right side of the Dock between Applications and Trash, or a folder full of Shares, for a Popup Menu!

Plug-ins not available when opening Garageband song with Logic-Pro 7.0.1

Can anyone help?
Whilst on the move recently I found myself composing a piece using Garageband. However when I got back to the studio and attempted to open the song using Logic Pro 7.0.1 I get:
Core Audio: Plug-in "BassAmpSi" not available! then
Core Audio: Plug-in "Hybrid Bas" not available!
As these must be Garageband instruments I don't understand why they're "not available" or what to do to make them available.
Any ideas?
Thanks everybody!

I googled this topic and found a Logic forum - they said you should update your software to 7.1, then the problem vanishes.

Plug-ins not available when importing song from Garageband

Can anyone help?
Whilst on the move recently I found myself composing a piece using Garageband. However when I got back to the studio and attempted to open the song using Logic Pro 7.0.1 I get:
Core Audio: Plug-in "BassAmpSi" not available! then
Core Audio: Plug-in "Hybrid Bas" not available!
As these must be Garageband instruments I don't understand why they're "not available" or what to do to make them available.
Any ideas?
Thanks everybody!
G5 Dual 2Gb Mac OS X (10.3.9) 3Gb Ram

Yeah! Had a bad experience with Tiger! My fault!
I Believed all the hype that I just had to update to Tiger as soon as it came out. So a multiple licence later and a day or so installing it all the computers in the studio I then find out that Pro-Tools wasn't compatible and had to back everything up and reformat my HD and re-install 10.3.9 which took about a year. I know it all works now (in theory) but with so much work on the go I'm shying off chancing it.
One of these days!
Thanks

Replacement airport card-not available

Apparently the airport card on my new ( 2 weeks old) MBPro failed. One minutes I was on line, wirelessly, then next ... nothing.
I know that Airport was working, because I immediately fired up my 'old' G4 iBook, and was immediately connected via Airport.
On the MBPro, even after re-starting/repairing permissions, etc., the Airport card did not show up in the System Profile.
I returned it to the Apple Authorized dealer; he checked it out, concluded that the card had gone bad. Ordered a replacement, and was told by Apple that they were 'not available'.
I called Applecare, who also told me that they were not available, and that they didn't know when they would be. The rep assigned a case number, 'escalated' the problem, said they'd get back to me within two days.
Is it not unreasonable to expect that Apple is still shipping MBPro's that they do have a source for a replace Airport card? Any idea what their problem is?
How long should I wait before asking for a replacement MBPro, if they can't fix mine right away?
Thanks,
Hal

<<<Re airport cards, two items:
Yesterday, my new MBPro suddenly stopped 'seeing' it's Airport connection.>>
This a 'Christmas' story, with a happy (for now) ending.
Recall, my airport connection suddenly disappeared. After some troubleshooting,
which seemed to confirm that it was indeed gone, I took it back to the Apple
Reseller I had bought it from. They confirmed the diagnosis, that the airport
card was seated properly, but airport wasn't working.
They had no other card to try, so I left the computer: they ordered a card,
then called and told me Apple didn't have any in stock! that they had no idea
how long it might be before one came in!
Amazing.
I called Applecare, and after some discussion, they escalated the case -- they
promised to get back to me within two days.
Today, two days later, we talked: still no 17" MBPro Airport cards in their
system. They agreed that Apple were still making this model, that somebody ...
somewhere ... undoubtedly had come airport cards, but that their supply system
didn't. They promised to call me the 26th.
In the meantime, I had run across this on the Apple MBPro Support Forum:
"I've had a similar problem in the past but it only dealt with the Airport
unavailability. I quickly resolved the issue by doing the following:
PMU RESET
1. Turn off computer.
2. Remove battery and unplug a/c power.
3. Hold power button down for 5 seconds.
4. Replace battery and a/c adapter and restart computer.
It's basically just a power management reset, for some reason it helps your
computer locate and identify drivers. I don't know how it works exactly, but I
do know it worked for me. give it a try and let us know.'
Though I sent this to the vender yesterday, for some reason they didn't try it.
So that I could at least have the use of the computer over the holidays, I went
out today, and picked it up, brought it home, and tried the above. And guess
what! Success!
When the computer re-started, there was the airport connect!
I 'suppose' that pulling the battery, re-set -- something? Any ideas what
happened, and why this 'fix' worked? I don't want to look 'gift horses' in the
mouth --- I"m glad it worked, but was curious if anyone had an idea what
happened to make it 'disappear', and why the 'cure' worked?
Happy Holidays,
Hal

HT1552 My PS3 has the UPnP as 'Not Available'. I just purchased an Airport to fix this problem, now what must I do to make it Available?

When not connrected to a router, the UPnp on my PS3 reads Not Available. This is particulary frusterating because I cannot play online. It became available when I hooked it up to my roomate's router but he's not letting me use his anymore so i just purchased a new AirPort Express. How do I set it up so the UPnP becomes AVAILABLE again? Please help!

troubleshooting messae http://support.apple.com/kb/ts2755

Cannot Connect to Time Capsule: "the backup disk is not available"

I am having a problem that I can't diagnose with my 500 GB Time Capsule (my HD is 128GB). The firmware is current. I first did a search for 'the backup disk is not available' since that is the message displayed in the Time Machine window (with the red checkmark).The Time Machine widget says this:
Attempting to mount network destination using URL: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
NetAuthConnectToServerSync failed with error: 89 for url: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
I installed the widget after I went to the Time Machine - Troubleshooting user tip, here: http://discussions.apple.com/thread.jspa?threadID=2057525. Also went to Using TIME MACHINE with a TIME CAPSULE, here: http://discussions.apple.com/thread.jspa?threadID=2296894
I also renewed the DHCP lease, tried to do 'connect as' from the Sidebar window, also via go-> connect to server ("there was an error connecting to the server Timecapsule; Check the server name or IP address & try again"), go to Time Machine under System Preferences, select "None" for hard drive, turned off Time Machine, then turned it back on and reselect Time Capsule as the hard drive to backup (timed out), tried re-setting up the Time Capsule both automatic & manual (times out when reading TC configuration)., and finally, writing this post.
I am connected to the internet with the Time Capsule, and I am concerned about making too many changes, because I don't want to risk losing my internet connection, since that seems to be working fine. I was able to make regular backups until yesterday. Tracing my steps from when it used to work to when it 'broke':
1)I attempted (unsuccessfully) to mount the Time Capsule so that I could do a search on it. (I didn't realize at the time that I couldn't mount a wireless device.)
2)The only other thing I did was drag some music folders that I wanted backed up next to my sparsebundle backup (which I can no longer see, because the Time Capsule is no longer accessible via the finder) only to get the spinning ball with the copying window, which I couldn't force quit unless I quit the Finder. So, I force quit, rebooted, and repaired the disk/permissions with disk utility.
Did I do something wrong by dragging & dropping my files over trying to use it as a backup AND a an external HD? Or trying to mount the drive? Or maybe since adding several gigs of music, I took up too much space & now don't have room for a backup? (In which case, I need to access the drive & erase the music, and start over: if only I could SEE it I could do that.)
I am still doing searches trying to see what I need to do; I haven't yet re-set it, due to my concern about my internet connection, which could potentially prevent me from getting any information to fix it. At this time, I am not sure if this is a Time Capsule, Time Machine, or Airport issue. During the time that I have been writing this, the red check changed to 'connecting' but then the 'delayed - Time Machine is not available' message came back up
TIA

Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
This is just standard windows.. woops, Mac OS networking now.

Error message: "the previously selected audio interface is not available"

HELP?!?!?!?!?
I'm stuck, and I can't go forward. Here's my issue:
I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
Please - this is driving me crazy.

I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
"Saffire LE should work fine in Logic Express.
Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
Do you still have the same problem?
Do you have any other firewire devices attached?
Have you had any other interfaces installed in the past?"
All good suggestions, but so far no luck.
Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

Time machine - disk not available

Dear guys,
i've installed osx server on an iMac in my lan, and I activate TimeMachine service on an usb Lacie 500GB.
On my macbook pro (osx lion) I've opened time machine, in disck menu window I've selected time machiene network disk on server and backup start without any problem.
On a second macbook pro (osx mountain lion) I've do same operations but when beckup start I have as error message "Back Up Disc Not Available". I have update disk name, disabled and re-enabled time machine, mount disk with cmd+k and changed disk in time machine but I still have the same problem.
On a third iMac (osx lion) i have the same error, seems that backup works only on my personal macbook. Can anyone help me? any ideas?

I have four macs using time machine on a single 1TB drive connected to Airport Extreme through USB. This morning I got the dreaded error-109 on Mac#1. This occured right after I had added Mac#4 to the bunch. While adding the Mac#4, I mounted my airport disk and then used time machine to select it for backup. I forgot to eject it after it had done the initial backup. That was when the error occured on the Mac#1.
Mac #1 C2D Mini 2009 SL 10.6.2
Mac #2 G5 DP L 10.5.8
Mac #3 MBP 2009 SL 10.6.2
Mac #4 MB C2D2006 SL 10.6.2
First I turned off TM on all of the Macs. I mounted the airport disk again, on Mac#1. I deleted the sparsebundle for Mac#1. I opened TM and selected the airport disk for backup. It is now backing up again on Mac#1. When it is finished, I will turn on TM once again on the other macs and see what happens. There is still a chunk of space left on the airport disk, about 680GB after all of the backups

ITunes library not available upon iMac sleep

I have an Intel Core Duo v10.4.8. My iTunes music is on here and I share it on my local network through AirPort Express. When my iMac goes to sleep the sharing is not available on the other computers and I must wake it to continue.
I have the computer set to sleep when it is inactive for 'never'. The display is set to sleep after 15 minutes. I've checked my network settings and have not found anything that would cause this.
I am connected through Built-in Eithernet. AirPort is currently off.
iMac4,1 Intel Core Duo Mac OS X (10.4.8)

Goth,
You checked it or did you actually perform an SMU reset?
How about the frequency? Does it sleep once a day? Every hour? Every 15 Minutes? Etc?
How about the "Schedule..." settings under Energy Saver? Are both those options cleared?
Mark

Time Machine says "The Backup Disk is Not Available"

Line 0: I have a 400 GB external Western Digital drive that I leave plugged into an Airport Extreme. Previously, this worked mostly without a problem. It took some massaging to get it to work at first (I had to create the backup with the drive directly connected to the computer, and then I moved the drive over to the Airport Extreme and it was fine after that), but after that, it worked forever. This was in the previous version of the OS that I was running (snow leopard?). I very recently upgraded to Lion and it seemed to be OK, but then suddenly it gave me an error that said it had not been able to do a backup for 10 days. I thought "wow, that means it hasn't backed up since I upgraded to Lion."
So I told it to do a backup right away. It failed with the error "The backup disk is not available."
I unplugged the drive and plugged it back in. No go.
I tried to reselect the drive from within Time Machine preferences. It would not appear and in fact it kept forcing me to go to the Airport Extreme software. I did this and there was no obvious way to set anything up from within that software. I left everything as it was ("Enable file sharing" checked, "Secure shared disks" was at "with device password," and it was remembering the password in my keychain).
Go back to Time Machine preferences and the disk still doesn't show up. Force a reboot on the router, it still doesn't show up.
I brought the drive over to the computer and plugged it in directly, and everything was fine. It did a backup on the spot, it read the backup that was there, the drive showed up, etc. I formatted it just for the heck of it and started over completely and it was happy. I did a disk check and everything was fine. After leaving it on all night to complete a new backup, I unmounted the disk, brought it over to the Airport Extreme, plugged it back in, and now we go back to line 0 and rinse repeat.
Can someone please tell me how to get my drive to start working with Time Machine again?

It should not have worked in the first place.. when you moved it from the PC to the airport extreme.. that is not correct.. I don't know how SL managed to work around it.. but Lion obviously cannot.
You will need to start all over again..
Also note.. the flakey nature of this setup.. according to well respected people here AEBS with USB drive does not give reliable TM backups.. I would pay close attention to what they are saying. Time Capsule is more than a AEBS with a hard drive inside.. although exactly the difference I don't know.
But you can expect the current setup to not work, because it never should have.

Amplitube is not available after upgrading OSX 10.4.8 to 10.5.4

Hi I have enjoyed using Amplitube X-gear (with Amplitube 2.0, Metal, Hendrix and Amplitube Live) for months. I have upgraded to OSX 10.5.4 recently. Now only Amplitube Jimmy Hendrix is available in Logic. I installed the latest updates for Logic and now running 8.02. I have just checked Garageband... and there is no problem. The entire Amplitube set is ok, all available in Garageband. Any idea...?

I just did as you said. I have run preferences/audio units manager and re-scanned ... i had to force them to recheck. No, when I open a project that uses Amplitube Logic doesn't give me a warning about Amplitube not being available. Instead in the channel strip/inserts drop down menu/audio units/[incompatible]/IK Multimedia/Amplitube...
Funny, but it works. Is there any way i could fix this, i mean go back to normal. I don't want to have any trouble with htis when working...?

Airport not available to Garageband

Similar Messages

Maybe you are looking for