Airport not being seen

I was able to set up an AirPort Extreme that is being seen by my mac mini. However, my G5 does not see the AirPort Extreme network it created. I have tried to manually type the network in, change security settings, and numerous other setting changes suggested by my DSL service provider. I have about 10 hours in getting this to work and I'm quite at a loss.
Two things of note. As the G5 is my work computer and the mac mini is the kids, I decided to reset the AirPort Extreme and try setting it up on the G5 as I really need the internet connection. The G5 still did not recognize it at factory settings in the Airport Utility and the mac mini did.
Secondly, the G5 does see the 2 Airport Express's I've had in the house and the Airport Extreme didn't till I made a physical Ethernet connection. I would assume the G5 airport card is working fine then. It seems only one or the other can see the Express's, not both.
Can someone point me in the right direction to getting both these computers to see the Airport Extreme network. Thank you.
Duel 2.3 GHz PowerPC G5   Mac OS X (10.4.9)   Airport Extreme 802.11n, Siemans 4100 DSL modem, 2 Airport Express

It looks like your correct. This morning I moved my G5 downstairs and physically hooked it up to the Airport Extreme, went back to factory defaults and redid the whole process. Disconnected it and the G5 recognized it wirelessly. I then moved the G5 upstairs (next to the mac mini) and didn't get the signal although the mac mini had a full strength signal. I then lugged it halfway to the base station (12 feet) and the G5 picked up a very weak signal (2 bars). Unplugging all the phones didn't help.
The signal on the AirPort is set to Automatic, it seems to like 11 as that is what appears in parens. I see where I can select a channel in the AirPort Utility, however should it be changed there or is there a way to change the channel on the G5 itself.
Thank you.
Duel 2.3 GHz PowerPC G5   Mac OS X (10.4.9)  

Similar Messages

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • LaCie d2 500GB Quadra Hard Drive Not Being Seen By Time Machine

    Hello all,
    I have a LaCie d2 500GB Quadra Hard Drive Not being seen by Time Machine hooked up to my iMac via firewire 800. My iMac is running latest updates etc. Have raised a support ticket and was given the following instructions by LaCie:
    Posted: 08 November 2007 @ 00:00
    Thank you for contacting LaCie Technical Support. Make sure the drive is mounting and you can assess files on it on your 10.5 system. If you can then you will need to reformat the drive to make it compatible with time machine.
    Warning! All data on the external drive will be destroyed in this process.
    Step 1: Run Applications > Utilities > Disk Utility
    Step 2: Click on the LaCie hard drive's 'physical' entry, usually the third entry in the list
    Step 3: Click on the Partition tab
    Step 4: Change 'Current Scheme' to '1 Partition'
    Step 5: Change the name of the drive back to what you would like it to be
    Step 6: The format needs to be Mac OS Extended, with or without journaling
    Step 7: Click on the Options... button
    Use "Apple Partition Map" partition scheme on a PowerPC-based Mac.
    Use "GUID" partition scheme on an Intel-based Mac.
    Step 8: Click on OK
    Step 9: Click on Apply
    Step 10: click on Erase at the bottom of the screen, then confirm the erase.
    The drive should start to be reformatted which should take only a few seconds and show up on the desktop with a new icon. Once it has you can then use it with time machine.
    I have done all of the above and it is still not being seen. Anyone had a similar issue or got the above to actually work?
    Thanks in advance!!!!

    Ryan,
    Check drive volume name and also the Computer name. Apple released a tech note recommending that both be limited to only the characters A-Za-z0-9 (no dashes, hyphens, or other special characters.
    If you can, send the Apple System Profiler report to me at the addres in my profile. Imay be able to see something there. I have helped another user with similar problems, but with a LaCie USB drive. He got things working by repeating the recommended steps, and double checking everything.
    As others have rported, this should work, so there may be something else preventing proper operation.
    If the drive is usable from Finder, but Time Machine cannot use it, there is something related in how Time Machine is viewing the drive.
    Mike

  • My Goflex external drive is not being seen since I installed Lion, any ideas.

    My Goflex external drive is not being seen since I installed Lion, any ideas I cannot see any driver updates etc.

    Try resetting SMC.
        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    What format are the pics - jpg or raw?
     Cheers, Tom

  • DVD 1270 not being seen in xp to install at start up windows 7

    DVD 1270 not being seen at startup in xp to install windows 7. Boot order works - the machine sees  a cd but not a dvd. Installed latest driver for lightscribe from this site. Also tried two other dvds - one a hp 1160 which works on  another machine it sees the dvd on other machine running w7 but not on this new one - ASUS mthrbd P867-M Le. ASUS says it is the DVD and to try another. Seems like it may be a config issue. Any ideas? Thanks

    Well, if the drive is good, then try a different SATA port.  It might be that the OS is looking for the drive per the BIOS and it is not on the SATA 0 port. BTW: Does this motherboard have 6GB SATA ports?  Do not use them for DVD drive.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Airport Express not being 'seen' after configuration in Windows

    I thought I would start my own thread on this, I had put this as a reply to someone elses before.
    I have a Gen1 Airport express being used to play music through our stereo system throughout the house. It was working perfectly until I replaced my dead wireless router. So, I did a full hard 'reset' on the AE, connected to the wireless network that the device created, and opened the Airport Utility. All seem to work fine - the AirPort Utility 'saw' the Express, did a configuration and "restarted" it. But while it was restarting, I got a notice that said "Airport Utility was unable to find your Airport Wireless Device..." AFTER it went through it's whole configuration.
    The light on the Express is solid green, when I look at my wireless router utility, it shows it connected and it can see it. But none of my devices "see" it - not iTunes, not my ipad or iphone.
    Again, it's a Gen 1 Airport Express, computer is Windows 7. Everything was working fine until I got the new wireless router.
    When I open Airport Utility after closing it, I again says it's unable to find and Airport Device.  And like I said, the light is solid green, and my network says it's connected to the Airport Express.
    i've done this over about 5 times now, trying everything....
    thoughts?
    thanks
    Bob

    I suspect your new wireless router.. if not an apple router is simply not airplay aware.. in which case airplay cannot work with the express.. you need a router that is apple compatible.. and not all routers are..
    Give the exact make and model of the new router.
    Do a google search if other people are having airplay issues with it.

  • Aim buddies not being seen online

    is there any chance my aim buddies are being seen offline all the time? its just.. I added people to my buddies and we talked once, but I haven't seen them again anymore, I can send offline messages to some, it says they'll read them when they go online, but some other contacts i can't send them offline messages.
    now I ran tests with an aim account i own, adding it as a buddy on my ichat @mac.com account, and when I went online on the aim account it did show on my ichat account, and also sent some offlines messages and I did receive them, but its me in the same computer not like faraway as everyone else, idk if that matters.
    now, do I have a technical problem? if so, how can I solve it?
    or have my friends just not gotten back online, or they blocked me or what? :S
    thanks for the help.

    Ralph Johns (UK) wrote:
    Hi,
    By Default ichat does not fully log out of AIM when you shut down iChat.
    This is partially so that you can get Off Line Messages when you start up your computer.
    What it also does is start up iChat if You have it shut down but your Computer On.
    Now you can (Sometimes) get a Message from AIM (AimSysMessage and Screen Name) asking if you want Off Line Messages.
    If you reply or indicate NO to this they can only be restated on the AIM Website
    Login to AIM web Pages then go to your Account Page the setting is there.
    iChat can be made to Log Off line (Status as Off Line ) with a setting in the iChat Menu > Preferences > General Section
    First Enable the Menu Bar icon.
    You now have full access to "When iChat is Quit, Set Status to Off Line".
    Now in iChat 4 and 5 you can also set your self to be Invisible.
    You appear Off Line to your Buddies but you can see if they are Online/Available/Away and so on.
    In any version of iChat in the iChat menu > Preferences > Accounts > Security you can set which Buddies see you as On line in various Allow Options an Block options.
    Add to this if you allow Multiple Logins and also have AIM Forwarding to a Mobile Phone.
    Now think of all those setting applying to your Buddies.
    Some maybe Invisible.
    Some may not have added you to their Buddy list and have Allow Buddy List Only (Or even Allow Specific People) set.
    Some may have set not to get Off Line Messages.
    Some may appear to be "On-Line" but are having messages sent to their Mobile Phone which they are not (able to) answering.
    Summary.
    Due to the number of variables that you have not been able to provide info on it is difficult to say if you have a problem.
    Based on your testing I would say not.
    7:33 PM Thursday; January 21, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    hey but even if all the things you wrote happened, if I do send them offline messages, they have to get them at some moment right? like I wouldn't be able to send someone offline messages if he blocked me, so if I send him offline messages he'll totally get them someday right?

  • K230 - Additional 2GB RAM not being seen

    My K230 came with 6GB RAM (3 of 4 slots used).
    Purchased this stick...
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820134192&cm_re=kvr667d2n5-_-20-134-192-_-Prod...
    It seems well seated but is not being detected.
    Any pointers? Should this RAM be compatible? its PC2-5300.
    help!

    Send them back. If new RAM - by itself - does not work - the set should be returned.
    If any one DIMM is 667 then they all will have to downclock
    Komputerbay 8GB (2x 4GB) DDR2 PC2-6400F 800MHz ECC Fully Buffered FB-DIMM (240 PIN) 8 GB w/ Heatspreaders for Apple computers
    http://www.amazon.com/Komputerbay-PC2-6400F-Buffered-Heatspreaders-computers/dp/ B005HIWDBE/
    Not sure about that brand Komputerbay $89 2x4GB
    Otherwise,  667Mhz is much cheaper and works just fine in a 2008 3,1 along with filling all 8 DIMM slots works to improve performance so much so that even the small 4% difference is not a factor and you come out ahead.
    I use these: 8 x 2GB $92
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-Arch-Memory/dp/B002ORUUAC/
    Cheapest I have seen, might need to set the fans to 900 rpm
    http://www.amazon.com/667MHz-Buffered-FB-DIMM-Memory-MA356LL/dp/B00D6Q45BA/
    32GB for $280
    http://www.amazon.com/gp/offer-listing/B009HNJCT6/
    4 x 4GB $160
    http://www.amazon.com/Buffered-PC2-5300-667MHz-FBDIMM-Memory/dp/B00S1Y0RSW/
    You were sold a set and they are not what they were suppose to be and there is no quick fix other than to replace and have a correct set sent out.

  • Ipod nano not being seen by computer, windows, 2000...

    after over a week on the phone and attemting to get my computer to "see" my nano, and not being able to do so. and after going thru every trouble shooting guide given to me by apple i did get my nano to work.
    I used every usb port but two, the two off the mother board, when i used one of them the nano took off and worked liked it was susposed to do, so...... you people who have this problem or know others pass the word use the mother board usb ports. nothing else.......

    i resolved my computer, windows 2000, not seeing by i pod nano, by using the usb ports from the mother board. use no other usb ports, not usb hubs, or other circurt ports, just mother ports..................

  • Ipod Touch (GEN 2) is not being seen under devices in my Itunes

    My Ipod Touch (GEN 2) is not being recognized under devices in my Itunes. My computer is recognizing it as a device under device manager, but it is not showing up under devices in my Itunes. I am also getting this error message saying "Itunes Could Not Connect to this Iphone because an unknown error occurred (0xE8000065)", and the weird thing about it is that i do not have an iphone but an ipod touch. I have followed the steps on the support website and they have not helped. Iam out of ideas and i really need some help. Please Help!!

    I would start here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Left Alt Key remapped to Z not being seen by LINUX FIREFOX

    HP Laptop Z key failed so I remapped Left Alt key as Z in Precise Puppy LINUX. It works as Z in every other program (even CHROMIUM) BUT NOT in FIREFOX.

    Sorry to hear that it is not being detected. As a work around have you tried this addon: [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/?src=search]

  • Express not being seen on Airport Extreme Network

    I have a new Airport Extreme connected to a PS running WIndows XP. Internet and all work well from PC, another laptop PC,my iMAc G5, and my MacBook.
    When I plug in the Express it turns green than amber than blinks amber, and is not seen from the airport utility. I did the 10 second reset and still nothing but blinking amber.
    A side problem is the PC's although seeing the Apple computers from the network, cannot connect to them.
    Any help appreciated. Kevin

    Mando2802, Welcome to the discussion area!
    Try doing a hard reset or factory default reset on the AirPort Express (AX).

  • How to resolve Time capsule not being seen in Airport utility?

    My Time Capsule cannot be recognized by Airport utility.  I have already tried the soft reset option, but still no luck.
    Trying not to do a hard reset, b/c I would prefer not loosing all of the information on the hard drive.
    Any suggestions or advice would be greatly appreciated.

    Trying not to do a hard reset, b/c I would prefer not loosing all of the information on the hard drive.
    Any type of reset....soft, hard, or Factory Default.....will NOT touch the data on the Time Capsule drive.
    You have to perform a completely separate Erase operation if you want to wipe the drive clean.
    If you have not already done so, try connecting an Ethernet cable directly from your Mac to one of the LAN <-> ports on the Time Capsule. Power down both the Mac and Time Capsule and restart.  See if that helps AirPort Utility "see" the Time Capsule.
    If not, then you will need to perform a Hard Reset or Factory Default Reset and start over again. You can use the same device name and passwords that you used before if you wish.

Maybe you are looking for