Airport not connecting to Internet

Hi
I have an Airport network using WPA personal encryption. I've set the mac to log onto my network when booted which it does. When I try to access the Internet, it won't connect. When I check 'Internet Connect' it says that i am logged onto the network, but not the Internet. When i also check airport admin, my airport express does not show up in the window, even after rescanning.
I have to turn off the Airport, then turn it back on again, select my network and after about 20 seconds it says, 'Connected to (my network)" " Connected to the Internet via Ethernet".
I have a windows machine sharing my network which has no problems (which pains me to say!).
Any ideas how to solve this.
Thanks

Take a look at my FAQ:
http://www.macmaps.com/WIFI1048.html

Similar Messages

  • Airport not connecting to Internet, but I can connect directly

    Hi - My Airport Extreme (4th Generation) suddenly popped up and told me it was reporting problems.  I cannot remember exactly what the issue was, but I think it was something with the IP address.   (sorry, I know that's not helpful.)  Since then I have talked with my ISP, found I can directly connect via the ethernet, and wiped the Airport back to factory settings.  Any suggestions?  I can connect to the Airport, but it doesn't go out to the Internet.  Again, it's not the ISP, because I can connect with the Ethernet.  Thanks!

    A little more info - I remembered the error had to do with Bridge mode, telling me I had to either turn it on or off.  And the current issue is that it does not have an IP address???  But I see an IP address on there - it's not pulling it from the modem???  Thanks!

  • Safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet?

    safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet? then a couple minutes later it reconnects. I am on an AT&T wireless.

    my mac G4 does not have any problem with this. suspect it is safari, airport never drop off or turn off, just safari

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • Green light on Airport Extreme but will not connect to internet

    I have tried restarting computer and Airport Extreme but it will not connect to internet.  Unit has been working great up until now.  I have made no changes in system.
    This Airport/time machine is 2009 version.

    The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
    It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
    Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
    Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
    Leave everything powered off for at least 30 minutes.  Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
    After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
    Power up the AirPort Extreme next, and let it run a few minutes
    Then power up other devices one at a time about a minute apart
    When the entire network is back up, check the network.
    It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
    To do that, power off the AirPort Exterme for a few minutes
    Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
    Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
    Power off the AirPort now, and start it back up in the proper sequence
    If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

  • Airport utility working, not connected to internet

    Airport utility is connected to wireless network, but computer is not connected to internet.

    Hi Amy,
    Try working through these links:
    Internet Troubleshooting
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/11395.html
    http://support.apple.com/kb/HT1714

  • Trying to setup airport for 1st time and it will not connect to internet, we also did not create a new network and cannot find this option again

    Trying to setup airport for 1st time and it will not connect to internet?

    You might try doing a reset of your AirPort unit.  Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
    For more advice, please describe all your networking gear.

  • Installed Airport - getting "not connected to internet" error

    I recently purchased a MacBook Pro and Airport extreme. I installed the Airport using MacBook (Snow Leopard) then hooked up my desktop iMac (OS X (10.4.11) - as per Tech Support recommendations. Everything works but here is a problem I encounter. When I wake the iMac and pull up Safari or Firefox I'm getting an error message of "not connected to internet" and the diagnostic box appears. I can hit "refresh" and the web site comes right up. Anyone have any ideas as to why this occurs?

    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

  • Airport express not connecting to internet

    I am switching from Clear to Comcast hopefully for faster, more reliable service.
    Connected the Comcast modem directly to my Mac Mini, activated...voila on the internet.
    Plug in Airport Express so that the Mini and my MBpro can share internet and a printer.
    AE powers up,gives the green light, but no internet service.
    System preferences>network states that WiFi has a self-assigned IP address of 169.254.xx.xx
    that will not connect to internet.
    With each reset the number changes slightly but still no internet.  I tried a manual number or 192.168.xx.xx
    and WiFi connects but still no internet. 
    1-1/2 hours with Comcast provided no help other than to call Apple.  Is this really that difficult? 
    With Clear it was a snap, but I am at the edge of the coverage zone and it sometimes fades.
    Please guide me through the steps.
    Thanks,
    JM

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Safari says not connected to internet on certain sites when connection is good and IMG[] images don't show up anymore?

    I recently updated to 10.6.8 from 10.5.x and have been having some issues.  First, Safari will say that my computer is not connected to the internet, but it is.  I can be on YouTube, for example, and then try to go to eBay, and it will say not connected to internet, but I can go to Google and it will be fine without doing anything.  Almost like it cannot connect to the server, but the message is that I'm not connected to the internet.  I can turn Airport off and back on and get on most pages that wouldn't open originally.  It's not site-specific.  Sometimes it's Google, Facebook, eBay, YouTube, forums, etc. and other times those same sites work just fine. 
    The next problem, which I feel is related is that IMG[xxx] images won't open some of the time now on forums that have Photobucket and Tinypic IMG codes inserted into threads.  It will just show the blue box with a question mark.  I think that's because my Safari can't open the image hosting websites because sometimes when I click on the blue box to open the link, it says not connected to the internet and Photobucket seems to be one of the regular problem sites. 
    I've tried clearing my cache, reseting Safari, and a few other suggestions on here from similar problems, but I haven't seen a post describing my same issues exactly.  I have not tried Firefox and would prefer to keep using Safari. 

    Try repairing permissions.
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup  disk on the left then select the First Aid tab.
    Select:  Repair Disk Permissions
    This can take a few minutes and better to not use your Mac while it's running.
    When it's finished, quit and relaunch Safari to test.
    Repairing permmissions helped another user with the same problem > "You are not connected to the internet"...: Apple Support Communities

  • I have a new ipad2, also an ipad1, with a gateway laptop. I have wireless router with windstream. Able to access my wireless connection on ipad1 and laptop, but can't on ipad2. Will say connected, but get message saying not connected to internet on Safari

    I got an ipad 2 today. Already have an ipad 1 and gateway laptop. Have wireless internet with windstream. I have internet connection on ipad 1 and laptop, but can't connect to internet on ipad2. It says i'm connected, but when accessing Safari, it says not connected to internet. Tried unplugging router and resetting already, still not working. Thanks for the help.

    Thank you for your response.
    I did try turning off the firewall, and reducing all the security levels to a minimum (under Control Panel>Internet Options). Also, I'm using a direct cable from my m/c to the Airport Extreme. But nothing helps. Due to the usage pattern in my family, using the MacBook for configuring the network is not optimal, hence my struggle to do it on my Windows desktop. But if that is the only way to go I suppose I'll have to.
    Subsequent to posting my query, I discovered that Apple had not singled me out, and many others with a Win OS face this problem, too. I would have thought Apple would do a proper job of testing before putting up the Windows version of Airport Utlity on their site.
    But thanks again. Much appreciate it.

  • Apple TV does not connect to internet over the WiFi network

    I recently bought an Apple TV and hooked it up to my Sony 46" HD LCD TV.
    My desktop is an iMac running Mac OSX Leopard
    I have created a WiFi network using the AirportExpress conected to an ADSL router.
    The wireless network is working fine and I have access to internet through my iMac or other PC and Apple laptops.
    Yesterday, I tried installing my new AppleTV following the little instruction book. My problem is that while the AppleTV detects my network (it shows up as the network) and on choosing this network connects to the network but gives a message that it has not connected to internet.
    As a result while it synchronises with iTunes on my iMac, it fails to download from the internet directly. I am unable to upgrade to the latest version or play YouTube or images from my MobileMe account or log on directly to the iTune Store.
    I have tried figuring out the problem but unable to do so. Thanks for your help.

    I am having a similar (or identical) problem. I have a network running on my airport extreme. My imac and my girlfriend's laptop can connect to the internet without issue. The apple tv finds my network and reports that it connects, yet it doesn't seem to. I cannot access trailers or youtube, cannot update, and cannot play purchased content. I reset the apple TV, but that did not solve the problem. Should I reset the airport extreme?

  • Suddently can't browse internet... "You are not connected to Internet"

    It has been now 2 months that I have an issue with internet with my Macbook Pro.
    I am connected to Internet and browsing internet, however suddenly and without any reason Safari/Firefox give me a message you are not connected to internet. However, MSN or YM are still working fine
    It happened to me with both Airport and Ethernet connection but only with my specific provider (but only in my macbook pro, not in my pc or iphone)
    When the problem occurs, I run a network diagnostic and found the following
    - Pinging an address that need DNS won't work (ping www.facebook.com ==> error: host unknown)
    - DNS lookup however working: lookup www.facebook.com ==> 66.220.145.10
    - Pinging 66.220.145.10 is working
    - any traceroute on IP numeric address is working, however when it need DNS it is not working (traceroute www.facebook.com: unknown host)
    The workaround I found is to disable and enable again the interface to make it working...
    Did someone have experience the issue?
    Regards, Bernard

    Me too.  What a pain!

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

Maybe you are looking for

  • Using drag and drop property in forms.

    Hi all, I want to use drag and drop property in a form during runtime.I am using oracle 7.3.I don't want to call any another application. Is there any way? Thx in advance.

  • SRM Installation on Windows

    We are installing SRM 5.0 on windows with sql server. In the step Create SAP stored procedures while Reading table MSSPROCS in database SR1, schema sr1.... we are getting the following error. We have already increased the memory to 3GB in boot.ini fi

  • How to use instr functions?

    Hi guys, I have a table like this: name data a 10101000U000 b 011U11001100 c 0U1001001001 d 01U010100010 I want to get the position of "U" in data column, like: name position of U a 9 b 4 c 2 d 3 what should I do? I use "instr" function, but failed.

  • In Itunes match I cannot maintain sync my reproduction list

    IN Itune Match : When I create a Reproduction List in my Imac, my devices does not sync the list but sync perfectely the songs and albuns.

  • Administration in BI 7

    Hello Friends.. Could any one please explain or send me a detail document about administration part of BI7 . I am not familier with BI acceletor , and other thing which are available in Administration. what are the more advantage we are having in BI