Airport not Reconnecting after waking from sleep
Hi all,
I have a problem with Airport not automatically reconnecting after the computer wakes from sleep or is turned on or rebooted. I have it set to join a specific network automatically. Any idea why this may be? It used to work just fine.
I had this problem just recently and seem to have fixed it today. I made the following changes:
I changed security from WPA2 to WPA using the Airport Admin Utility.
I went to the Network Preferences panel and found that the network was still listed as WPA2, so I deleted it.
I then added the WPA network to my preferred network list.
The computer now reconnects automatically after sleep or shutdown.
I don't know whether changing from WPA2 to WPA was necessary. It may be that all you need to do is delete and re-add the network.
Hope that helps!
Similar Messages
-
Tecra R840 do not shutdown after waking from sleep (USB, BT is not working)
Hello,
I've a problem with my R840 running win7pro + SSD.
After waking it from sleep:
- no USB activity (but there is power in the ports since I can see the leds on in the external HDD or mouse)
- my Bluetooth mouse stops working
- my internet connection will work after 1 or 2 minutes of waiting
- and...the laptop will not shutdown unless I press the physical on/off button for 5 secs or so!!!
In device manager everything seems ok! The Power management in all the devices/USB hubs etc are set to not turn off the devices to save power!
Already clean booted the laptop several times and the problem remains!
Everything is just fine if the laptop do not sleep!
But I put it in a sleep mode and the I wake it I have all those problems!
Any sugestions?
Best Regards,
paulo>But I have the SSD for almost 2 years or so and it worked without this issue for a long time!
>This appeared (or at least I detected it) suddenly.
Hi Paulo this would mean that there is nothing wrong with the BIOS because as you said above: the unit worked properly in the past.
I guess the system is muddled up and does not work properly after waking up from sleep mode:
Possible solution -> the system should be reinstalled. In case youve got the Toshiba recovery medium, such OS installation / recover process would be very easy and does not take very long -
Bluetooth is not ready after waking from sleep on Windows 7
After upgrading my Tecra M10 from Windows Vista x64 Enterprise to Windows 7 x64 Enterprise, sometimes, when I wake the laptop from sleep, Bluetooth is not ready.
Hibernating doesn't solve the problem, it needs a reboot which is a problem for me beacuse I usually have lots of applications open.
When this happens, the only Bluetooth devices on Device Manager are:
* Bluetooth RFCOMM
* Bluetooth USB Controller-5 from TOSHIBA
When all is working well, the Bluetooth devices on Device Manager are:
* Bluetooth RFBUS
* Bluetooth RFCOMM
* Bluetooth RFHID
* Bluetooth USB Controller-5 from TOSHIBA
How can I restart Bluetooth without having to restart the whole system? Turning wireless communications on and off on the side silder doesn't work.
Thanks,
Paulo MorgadoHi,
I have a *two week old X500-10T* From day one I have had a number of issues, working with the Toshiba Technical support I have had to disable hibernation for mains power and battery use. My screen went to sleep and just could not wake it up without doing a reset procedure including the removal of the battery etc.
I have been told to look out for another updated BIOS that should solve this issue. I already have a later BIOS on my laptop than the ones the Toshiba Tec support have.
Having sorted that (not really) I also have an issue with my Bluetooth and mouse. It seems to work till you leave it for about two hours, then the icon in the task bar goes ??RED?? and you can??t in any way get it to connect again. By doing a reboot it mostly comes back into action but not always. I have to fiddle about with switching on and off from the Bluetooth manager till it comes back to life.
Again with the great support from the Toshiba Technical support (TTS) we tried almost everything, loading the latest stack, going back to a restore point before the installation of the Windows update etc etc, but nothing solved the issue.
Again TTS suggested I keep an eye out for a BIOS update. My previous Toshiba has worked well for many years and I am sure Toshiba will eventually come up with the cause. Very disappointing, but I am keeping my fingers crossed for a satisfactory solution (shortly I hope)
I hope this helps some other X500-10 users. -
Keyboard/mouse do not function after waking from sleep?
Hi, I've recently noticed that when ever I wake my MacBook from sleep mode, the keyboard and mouse do not respond to any input. It does not occur every time, but the majority. If I close the display a few more times and wake it again it can sometimes work but obviously this is time consuming.
Has anyone else encountered this or know of a solution?
Thanks in advanceWell I just bought my iMac few days ago, the Apple propaganda is all that their products are so much better and blablablabla, basically sales talk.
Anyway, I was stupid enough to buy one and now I'm feeling the "real Mac expirience", keyboard and mouse have a lot of "wireless" connection issues but what real ****** me of is the fact that if my keyboard does not connect I have to shut the iMac on the on/off button, which i supose is not very good for the Mac's health, but well this is the leasson.
Resuming I have the same problem as the one reported here, and worse than the problem is seeing Apple's "support" on this subject, which is nule, this worries me even more.
Back to crap computers that at least work out. -
Network mounts don't reconnect after waking from sleep
Hi,
I'm a network administrator for a small TV studio that's Mac-based. We had an up-to-date upgrade from Lion to Mountain Lion on one of our iMacs, plus updated a couple of our others for testing purposes. They're connected to a Lion server with Open Directory, and network shares are set up such that when a user logs in, the shares are mounted and available on their desktop.
Unfortunately, on the Mountain Lion machines, when the computers are woken from sleep, the shares are no longer mounted. I thought that maybe this might be resolved in 10.8.1, but it's still not fixed in 10.8.3. It's especially a problem when a document is open on one of those shares, and then the app fails because the file is no longer available. Note that this does not happen on the Lion machines.
Has anyone else come across this problem? Is there any way to fix it, or is it an OS bug? I'm not willing to roll this out to the rest of the network until I can get this sorted out.
James.
EDIT: I've just found other discussions with a similar question to this (a search before posting didn't show anything until I posted this one!). That said, there's still no answer to the problem. Can we get Apple's attention with this one??James Hope wrote:
What can one do????
Prevent them from sleeping? Apple is moving towards a more mobile world where wireless resources come and go. If you are still working with wired connections, you might need to make some changes. Not sleeping is once answer. AFP has some issues with passwords that cause problems with automount. I think they are fixable and I've always had a plan to write a little Keychain-aware command-line mounter for autofs. Always too busy though. I know that AFP supports Kerberos with automount. Since you have all Mac equipment, it seems like you could implement that pretty easily, well, as easily as Kerberos. I've never used it but I've heard stories. If you ware workng with an old-school topology, you could go to an old-school network like NFS. There are any number of hack-arounds. There are tools that will automatically run scripts (or mount drives) upon wake. You could replace those mounts with aliases (not symbolic links, true Mac aliases) that will get automatically mounted when you double-click on them. -
Using Second Monitor Airport Does Not Reconnect Upon Waking from Sleep.
Using: MBP; OSX v10.6.5; Airport v5.5.2; Menu Bar assigned to second monitor which is a ViewSonic plugged in via mini-display port to HDMI.
When MBR goes to sleep and wakes upon mouse movement Airport does not re-establish the connection to my network.
No closing of lid or manually putting MBP to sleep involved. Just leave lid open on MBP and walk away for an hour. Upon return, move mouse, everthing wakes except Airport which shows an exclamation mark in the menu bar for the Airport ICON.
When using MBP display for the Menu Bar screen Airport wakes OK.
What's with that behavior???I changed channels from AUTO to Ch 11. Was there a specific frequency you had in mind.
I also closed the lid to the MBP, let things go to sleep, returned to the office, moved the mouse and the Airport came on line on its own.
I figure there is programmatic problem within either the OS or the Airport coding that prevents Airport re-finding a network with both displays active but the Menu Bar on the secondary screen. -
Airport Extreme disappears after waking from sleep.
Here is a strange one for the experts out there...
I recently purchased an Airport Extreme card for my G4 Powermac (FW800). It is the Broadcom BCM43xx 1.0 (4.170.25.8). It installs easy, and it works great. I can connect to my Airport Express with no problem, and to my 2009 MacBook.
The problem occurs after the computer goes to sleep. After I wake it (even if it's only after a minute), the Airport Icon disappears and the Spinning Beach Ball of Death appears over the title bar, and the dock. I can click on windows and move them, but not use them.
If I use the Special Menu and tell the computer to sleep I don't have any problems. I'm using the latest update for Leopard, but this happened with Tiger, too.
Any thoughts?I had this problem just recently and seem to have fixed it today. I made the following changes:
I changed security from WPA2 to WPA using the Airport Admin Utility.
I went to the Network Preferences panel and found that the network was still listed as WPA2, so I deleted it.
I then added the WPA network to my preferred network list.
The computer now reconnects automatically after sleep or shutdown.
I don't know whether changing from WPA2 to WPA was necessary. It may be that all you need to do is delete and re-add the network.
Hope that helps! -
Mutiple monitor setup not working after waking from sleep
Mac Mini 2011
Mavericks (10.9.3)
Monitor 1 Mini->HDMI Cable->Monitor
Monitor 2 Mini->Mini Display Port to HDMI Adapter->HDMI Cable->Monitor
Monitors are not the same size
Thw adapter is PNY (PNY A-DM-HD-W01)
Upgraded to Mavericks, second monitor works nicely. However, when waking the system up after it goes to sleep, the second monitor does not turn on. Further, the primary montior blinks every few seconds between the usual display and shrinking the windows to a smaller size. Unplugging the second monitor from the HDMI adapter cable stops the blinking, but connecting it again (even after waiting a few minutes) makes the blinking continue and the second monitor does not wake up. On reboot, all works fine again.Hello chacham,
The article linked below provides some useful troubleshooting steps that can help resolve the issues you're experiencing with your display.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen -
External keyboard and mouse not recognized after waking from sleep
This started happening all of a sudden. It was working fine before that. When I disconnect the power cable, keyboard, and then connect them back, its not recognized. To make it recognize the keyboard and mouse, I have to logout and login or restart the laptop. I looked at this related post, but the PRAM reset fix did not work for me : http://forums.macrumors.com/showthread.php?t=870482
Any idea how to fix it?
OS version: 10.9.2
MacBook Pro 13-inch Mid 2012
Processor 2.9 GHz Intrel Core i7
Memory 16GB 1600 MHz DDR3I have a similar problem on our G3 iBook with Panther. Most of the keys don't work, and of the four or five that do, they print only gibberish.
For a while I had control of the "C" key, and I was able to start from the Installation CD-ROM. I ran Disk Utility. It found and repaired a whole bunch of permissions and reported no problem with the hard disk. But I still cannot use the keys, and since then I've lost the use of the "C" also.
Because I cannot use the keyboard, I cannot type in my administrator's password, and for that reason I cannot use System Preferences to start from the Installation CD-ROM. I did not see the Hardware Test on the CD-ROM, but it sounds interesting.
Any ideas on how to get back to the CD-ROM when my keyboard doesn't work? -
Network connection after waking from sleep
Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
http://docs.info.apple.com/article.html?artnum=304482 -
My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode
Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
Does anyone know how to fix that?
Thanks in advance,
Arthur.Hi, arthurpacifico.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
If the issue persists, try the troubleshooting steps I have attached below.
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Cheers,
Jason H. -
Display will not sleep any more after waking from sleep
My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
Any suggestions? Anyone else ever see this? Seeing it now?
Thanks!This is still an issue for me.
I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
Sometimes a reboot fixes it, sometimes I have to reset the SMC.
Any info out there? -
On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --
Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.
-
Losing WiFi connection after waking from sleep
I've iMac 27 in. with recently upgraded OS X Lion to 10.7.4. After this was done the problems strated with connecting to Wi-Fi through my Time Capsule (2TB, 802.11n 4th Gen) after waking from sleep. Everything works fine when iMac is started after shutdown. My internet router is connected through ethernet cable to Time Capsule and iMac is using Wi-Fi connection with Time Capsule.
I've tried to install iMac Wi-Fi update v1.0 but it I cann't do it because my OS X is 10.7.4 and the update installer is stopping the installation after the check of my OS version.
Could anybody help to solve this problem, please?but when the
computer goes to sleep and is then awakened, there
are no wireless networks listed in chooser... like
there are no wireless networks available...
Hi greaser5!
That is definitely NOT typical operation. Yes, your Core Duo iMac must restart after sleep, but It should reconnect to a working network instantaneously (less than a second), although it will probably take longer than that for your iMac to fully restart after sleep and actually be able to use the network.
Delete all prior wireless configurations that you have saved on the "Location:" selector of the Network panel of System Preferences. On the Network>AirPort>AirPort panel also delete all your preferred wireless networks. Click the "Apply Now" button.
Restart your Mac. Turn on AirPort. Use the Network panel's "Assist me..." button and the following blue "Assistant..." button to configure a fresh wireless connection to your working wireless network. This will be fresh and total, just as you did when your iMac was new. There is no need to give your network either a new name or a new password, as the old ones will work just fine in the new configuration, since as you know, the current network is working fine, the iMac simply can no longer connect to it correctly using its current configuration.
I have not been able to test the above on a Core 2 Duo, so do not know first hand if it will make any difference on those iMacs, but that or some similar fiddling should resolve the issue. -
Kernal panics after waking from sleep on MBP
I have a client machine that continues to crash after waking from sleep. Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
Here is the first log:
Interval Since Last Panic Report: 42291 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Mon Jan 21 14:40:59 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807e493870 : 0xffffff8000220792
0xffffff807e4938f0 : 0xffffff80002c4794
0xffffff807e493aa0 : 0xffffff80002da55d
0xffffff807e493ac0 : 0xffffff7f816c6e1f
0xffffff807e493ca0 : 0xffffff7f816e3c05
0xffffff807e493ce0 : 0xffffff7f816c5257
0xffffff807e493d10 : 0xffffff7f80c9a832
0xffffff807e493d50 : 0xffffff7f8174d4f0
0xffffff807e493da0 : 0xffffff7f8174f692
0xffffff807e493de0 : 0xffffff7f8174f7c4
0xffffff807e493e20 : 0xffffff7f80c9e4c5
0xffffff807e493e60 : 0xffffff7f80c9e628
0xffffff807e493e90 : 0xffffff7f80ca1fd7
0xffffff807e493ef0 : 0xffffff800063d4d6
0xffffff807e493f30 : 0xffffff800063c250
0xffffff807e493f70 : 0xffffff800063c0f4
0xffffff807e493fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 42049368948948
last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 16384)
last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AudioAUUC 1.59
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14100000 / 4
Second log---------------------------------------------------------------------------- -----------------------------------
Interval Since Last Panic Report: 18613 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Wed Jan 30 13:21:54 2013
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ef03810 : 0xffffff8000220792
0xffffff807ef03890 : 0xffffff80002c4794
0xffffff807ef03a40 : 0xffffff80002da55d
0xffffff807ef03a60 : 0xffffff7f816d61f1
0xffffff807ef03b70 : 0xffffff7f816d7413
0xffffff807ef03bb0 : 0xffffff7f816c6e31
0xffffff807ef03ca0 : 0xffffff7f816e3c05
0xffffff807ef03ce0 : 0xffffff7f816c5257
0xffffff807ef03d10 : 0xffffff7f80c9a832
0xffffff807ef03d50 : 0xffffff7f8174d4f0
0xffffff807ef03da0 : 0xffffff7f8174f692
0xffffff807ef03de0 : 0xffffff7f8174f7c4
0xffffff807ef03e20 : 0xffffff7f80c9e4c5
0xffffff807ef03e60 : 0xffffff7f80c9e628
0xffffff807ef03e90 : 0xffffff7f80ca1fd7
0xffffff807ef03ef0 : 0xffffff800063d4d6
0xffffff807ef03f30 : 0xffffff800063c250
0xffffff807ef03f70 : 0xffffff800063c0f4
0xffffff807ef03fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 18633492210750
last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64 2.0.0 (addr 0xffffff7f810cc000, size 147456)
last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814fc000, size 8192)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.75
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14200000 / 1
Sorry for the huge post. The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it. I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
Thanks in advance for the help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Error while adding attachments using attachmentLink
Hi All, I am getting the below error sporadically while i add an attachment using my custom UI. The OA passivation framework coding standard has been violated. The view object with full name, xxCustomAM.oracle_apps_fnd_server_OAAttachmentsAM.Attach_1
-
I deployed EJB to enable RFC Sender Adapter to work in exactly once in order this is the code I used : package com.netafim; import javax.ejb.SessionBean; import javax.ejb.SessionContext; import javax.ejb.CreateException; import com.sap.aii.af.mp.modu
-
Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv
I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers. After installing disk 1 Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page http://bmlfileserver:8080/CmcApp/ anyo
-
Does anyone know the criteria (item_id,creation_date,etc) by which Oracle interprets the Items from a given item range in BOM Mass change.
-
Scout file explorer - shows ALL hidden files, how do I stop this?
Hi People, I know this probably isn't the correct space for this question, but I'll give it a shot anyway. I bought Scout file explorer via the app store. The app doesn't have a 'Preferences' area - and it's showing up ALL files... even ones that wou