Airport not shown in interconnect connect

still can't access airport extreme. airport not shown as an option in interconnect connect. am i missing a chunk of software? If so, how can i get it? spotlight search for "airport' reveals only the two utilities from the installation. should there be something else, an extension or something?

Hi Gino, thanks for your answer. Airport is not shown in the list of network devices! There is no Airport icon in the menu. It's almost as if the Airport function was never installed. I have no way to turn it on or off because it's not listed anywhere. Mac & base station are right next to each other.
This is a new APBS & I've never used Airport before. It appears that the APBS software CD installs only the Admin and Setup utilities. Is there more to the Airport function than these 2 utilities? Is there a way to install the Airport function (system software? haven't been able to find anything).
Many thanks to you & this forum!
Bob

Similar Messages

  • Anyconnect created profile not shown in connection list, especially the wireless profiles.

    Dears,
    Kindly advise as we encounter anyConnect issue, when creating profile for using with ISE, the new created profile is not shown in the connection list.
    I’m using profile editor to create profile for EAP-Fast, the issue is that the profile that was created not shown in the connection list.
    i put the xml file in the correct location
    C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles
    in windows 7.
    it is shown in saved networks but not shown in the connection list.
    we tried profile editor version 4 but the same issue still exist.

    Hi,
    Test the System Connector Type in the Portal.
    Connector should be any one of the Types :JDBC, ODBO, XMLA, OLAP then only the BI systems will be appear in the BI integartion wizard,
    Govindu

  • TS1567 My Ipod Classic appears in my computer when connected to my Windows 8 pc but when itunes starts it no longer appears and is not shown in Itunes also. Itunes appears to disconnect it from pc.

    My Ipod Classic appears in My Computer when I connected it to my new Windows 8 pc. When Itunes starts my Ipod is no longer appears in My Computer and is not shown under Devices in Itunes. It appears that Itunes disconnects my Ipod from the pc. My Ipod still sync's up fine with Itunes on my old Windows XP pc.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Tables not shown in connections tree for DB2 databases

    Hi!
    I often use SQL Developer to connect to our DB2 databases. However, when I expand the desired schema in a DB2 database, the Tables node is empty, although it should not be. There are tables in that schema and I can select data from them, so security is not an issue:
    For example:
    select tabschema, tabname from syscat.tables where tabschema not like 'SYS%' order by 1,2;
    returns many schema names and table names is those schemas. Let's pick one, i.e table name METER_TYPE in schema METER ( there are 4 tables in schema METER)
    select count(*) from meter.meter_type
    returns: 38
    However, the Tables node shows no tables. Tese tables are not Aliases (DB2 slang for synonyms) or views, however, those 2 nodes are also empty when they should not be - we have schemas with aliases and views, which are also NOT shown. The Index node is populated most frequently, but not completely (there are indexes missing).
    Here are my details (don't be fooled by java 1.7, the behaviour is the same with 1.6):
    DB2 jdbc driver version: 3.57.82
    About
    Oracle SQL Developer 3.0.04
    Version 3.0.04
    Build MAIN-04.34
    Copyright © 2005, 2011 Oracle. All Rights Reserved.
    IDE Version: 11.1.1.4.37.59.31
    Product ID: oracle.sqldeveloper
    Product Version: 11.1.2.04.34
    Version
    Component     Version
    =========     =======
    Java(TM) Platform     1.7.0
    Oracle IDE     3.0.04.34
    Versioning Support     3.0.04.34
    Properties
    Name     Value
    ====     =====
    awt.toolkit     sun.awt.X11.XToolkit
    class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
    class.load.log.level     CONFIG
    class.transfer     delegate
    file.encoding     UTF-8
    file.encoding.pkg     sun.io
    file.separator     /
    http.nonProxyHosts     localhost|localhost.localdomain|127.0.0.1|::1|localhost|alex.localdomain
    ice.browser.forcegc     false
    ice.pilots.html4.ignoreNonGenericFonts     true
    ice.pilots.html4.tileOptThreshold     0
    ide.AssertTracingDisabled     true
    ide.bootstrap.start     5367470843749639
    ide.build     MAIN-04.34
    ide.conf     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
    ide.config_pathname     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
    ide.debugbuild     false
    ide.devbuild     false
    ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
    ide.firstrun     true
    ide.java.minversion     1.6.0_04
    ide.main.class     oracle.ide.boot.IdeLauncher
    ide.patches.dir     ide/lib/patches
    ide.pref.dir     /home/alex/.sqldeveloper
    ide.product     oracle.sqldeveloper
    ide.splash.screen     splash.gif
    ide.startingcwd     "/home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin"
    ide.user.dir     /home/alex/.sqldeveloper
    ide.user.dir.var     IDE_USER_DIR
    ide.vcs.noapplications     true
    ide.work.dir     /home/alex/sqldeveloper
    ilog.propagatesPropertyEditors     false
    java.awt.graphicsenv     sun.awt.X11GraphicsEnvironment
    java.awt.printerjob     sun.print.PSPrinterJob
    java.class.path     ../../ide/lib/ide-boot.jar
    java.class.version     51.0
    java.endorsed.dirs     /home/alex/prg/jdk1.7.0/jre/lib/endorsed
    java.ext.dirs     /home/alex/prg/jdk1.7.0/jre/lib/ext:/usr/java/packages/lib/ext
    java.home     /home/alex/prg/jdk1.7.0/jre
    java.io.tmpdir     /tmp
    java.library.path     /home/alex/prg/oracle/instantclient_11_2::/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
    java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
    java.protocol.handler.pkgs     oracle.jdevimpl.handler
    java.runtime.name     Java(TM) SE Runtime Environment
    java.runtime.version     1.7.0-b147
    java.specification.name     Java Platform API Specification
    java.specification.vendor     Oracle Corporation
    java.specification.version     1.7
    java.util.logging.config.file     logging.conf
    java.vendor     Oracle Corporation
    java.vendor.url     http://java.oracle.com/
    java.vendor.url.bug     http://bugreport.sun.com/bugreport/
    java.version     1.7.0
    java.vm.info     mixed mode
    java.vm.name     Java HotSpot(TM) 64-Bit Server VM
    java.vm.specification.name     Java Virtual Machine Specification
    java.vm.specification.vendor     Oracle Corporation
    java.vm.specification.version     1.7
    java.vm.vendor     Oracle Corporation
    java.vm.version     21.0-b17
    jdbc.library     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/jdbc/lib/ojdbc6.jar
    line.separator     \n
    log.file.name     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/extensions/oracle.datamodeler/log/datamodeler.log
    oracle.home     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper
    oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
    oracle.jdbc.mapDateToTimestamp     false
    oracle.net.tns_admin     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/network/admin
    oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
    oracle.xdkjava.compatibility.version     9.0.4
    orai18n.library     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/jlib/orai18n.jar
    os.arch     amd64
    os.name     Linux
    os.version     2.6.30.10-105.2.23.fc11.x86_64
    path.separator     :
    reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
    sqldev.debug     false
    sun.arch.data.model     64
    sun.awt.enableExtraMouseButtons     true
    sun.boot.class.path     /home/alex/prg/jdk1.7.0/jre/lib/resources.jar:/home/alex/prg/jdk1.7.0/jre/lib/rt.jar:/home/alex/prg/jdk1.7.0/jre/lib/sunrsasign.jar:/home/alex/prg/jdk1.7.0/jre/lib/jsse.jar:/home/alex/prg/jdk1.7.0/jre/lib/jce.jar:/home/alex/prg/jdk1.7.0/jre/lib/charsets.jar:/home/alex/prg/jdk1.7.0/jre/classes
    sun.boot.library.path     /home/alex/prg/jdk1.7.0/jre/lib/amd64
    sun.cpu.endian     little
    sun.cpu.isalist     
    sun.desktop     gnome
    sun.io.unicode.encoding     UnicodeLittle
    sun.java.command     oracle.ide.boot.Launcher
    sun.java.launcher     SUN_STANDARD
    sun.java2d.ddoffscreen     false
    sun.java2d.pmoffscreen     false
    sun.jnu.encoding     UTF-8
    sun.management.compiler     HotSpot 64-Bit Tiered Compilers
    sun.os.patch.level     unknown
    svnkit.sax.useDefault     true
    user.country     US
    user.dir     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin
    user.home     /home/alex
    user.language     en
    user.name     alex
    user.timezone     CET
    windows.shell.font.languages     
    Extensions
    Name     Identifier     Version     Status
    ====     ==========     =======     ======
    Check For Updates     oracle.ide.webupdate     11.1.1.4.37.59.31     Loaded
    Code Editor     oracle.ide.ceditor     11.1.1.4.37.59.31     Loaded
    Component Palette     oracle.ide.palette1     11.1.1.4.37.59.31     Loaded
    Data Miner     oracle.dmt.dataminer     11.2.0.1.10.109     Loaded
    Database Connection Support     oracle.jdeveloper.db.connection     11.1.1.4.37.59.31     Loaded
    Database Object Explorers     oracle.ide.db.explorer     11.1.1.4.37.59.31     Loaded
    Database UI     oracle.ide.db     11.1.1.4.37.59.31     Loaded
    Diagram Framework     oracle.diagram     11.1.1.4.37.59.31     Loaded
    Diagram Javadoc Extension     oracle.diagram.javadoc     11.1.1.4.37.59.31     Loaded
    Diagram Thumbnail     oracle.diagram.thumbnail     11.1.1.4.37.59.31     Loaded
    Diff/Merge     oracle.ide.diffmerge     11.1.1.4.37.59.31     Loaded
    Extended IDE Platform     oracle.javacore     11.1.1.4.37.59.31     Loaded
    External Tools     oracle.ide.externaltools     11.1.1.4.37.59.31     Loaded
    File Support     oracle.ide.files     11.1.1.4.37.59.31     Loaded
    Help System     oracle.ide.help     11.1.1.4.37.59.31     Loaded
    History Support     oracle.jdeveloper.history     11.1.1.4.37.59.31     Loaded
    Import/Export Support     oracle.ide.importexport     11.1.1.4.37.59.31     Loaded
    Index Migrator support     oracle.ideimpl.indexing-migrator     11.1.1.4.37.59.31     Loaded
    JDeveloper Runner     oracle.jdeveloper.runner     11.1.1.4.37.59.31     Loaded
    JViews Registration Addin     oracle.diagram.registration     11.1.1.4.37.59.31     Loaded
    Log Window     oracle.ide.log     11.1.1.4.37.59.31     Loaded
    Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.4.37.59.31     Loaded
    Navigator     oracle.ide.navigator     11.1.1.4.37.59.31     Loaded
    Object Gallery     oracle.ide.gallery     11.1.1.4.37.59.31     Loaded
    Oracle IDE     oracle.ide     11.1.1.4.37.59.31     Loaded
    Oracle SQL Developer     oracle.sqldeveloper     11.1.2.04.34     Loaded
    Oracle SQL Developer - 3rd Party Database Browsers     oracle.sqldeveloper.thirdparty.browsers     11.1.1.04.34     Loaded
    Oracle SQL Developer - DBA Navigator     oracle.sqldeveloper.dbanavigator     11.1.1.04.34     Loaded
    Oracle SQL Developer - Extras     oracle.sqldeveloper.extras     1.1.1.04.34     Loaded
    Oracle SQL Developer - File Navigator     oracle.sqldeveloper.filenavigator     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Antlr3 Translator     oracle.sqldeveloper.migration.translation.core_antlr3     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Application Migration     oracle.sqldeveloper.migration.application     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Core     oracle.sqldeveloper.migration     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations DB2     oracle.sqldeveloper.migration.db2     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations DB2 Translator     oracle.sqldeveloper.migration.translation.db2     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Microsoft Access     oracle.sqldeveloper.migration.msaccess     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Microsoft SQL Server     oracle.sqldeveloper.migration.sqlserver     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations MySQL     oracle.sqldeveloper.migration.mysql     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Sybase Adaptive Server     oracle.sqldeveloper.migration.sybase     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations T-SQL Translator     oracle.sqldeveloper.migration.translation.core     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Teradata     oracle.sqldeveloper.migration.teradata     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Translation UI     oracle.sqldeveloper.migration.translation.gui     11.1.1.04.34     Loaded
    Oracle SQL Developer - Object Viewer     oracle.sqldeveloper.oviewer     11.1.1.04.34     Loaded
    Oracle SQL Developer - Real Time SQL Monitoring     oracle.sqldeveloper.sqlmonitor     11.1.1.04.34     Loaded
    Oracle SQL Developer - Reports     oracle.sqldeveloper.report     11.1.1.04.34     Loaded
    Oracle SQL Developer - Scheduler     oracle.sqldeveloper.scheduler     11.1.1.04.34     Loaded
    Oracle SQL Developer - Schema Browser     oracle.sqldeveloper.schemabrowser     11.1.1.04.34     Loaded
    Oracle SQL Developer - SearchBar     oracle.sqldeveloper.searchbar     11.1.1.04.34     Loaded
    Oracle SQL Developer - Snippet     oracle.sqldeveloper.snippet     11.1.1.04.34     Loaded
    Oracle SQL Developer - Spatial     oracle.sqldeveloper.spatial     11.1.1.04.34     Loaded
    Oracle SQL Developer - TimesTen     oracle.sqldeveloper.timesten     2.0.0.04.34     Loaded
    Oracle SQL Developer - Tuning     oracle.sqldeveloper.tuning     11.1.1.04.34     Loaded
    Oracle SQL Developer - Unit Test     oracle.sqldeveloper.unit_test     11.1.1.04.34     Loaded
    Oracle SQL Developer - User Extensions Support     oracle.sqldeveloper.userextensions     11.1.1.04.34     Loaded
    Oracle SQL Developer - Worksheet v2     oracle.sqldeveloper.worksheet     11.1.1.04.34     Loaded
    Oracle SQL Developer - XML Schema     oracle.sqldeveloper.xmlschema     11.1.1.04.34     Loaded
    Oracle SQL Developer Data Modeler     oracle.datamodeler     3.0.0.665.2     Loaded
    Oracle SQL Developer Data Modeler - Reports     oracle.sqldeveloper.datamodeler_reports     11.1.1.04.34     Loaded
    PROBE Debugger     oracle.jdeveloper.db.debug.probe     11.1.1.4.37.59.31     Loaded
    Peek     oracle.ide.peek     11.1.1.4.37.59.31     Loaded
    Persistent Storage     oracle.ide.persistence     11.1.1.4.37.59.31     Loaded
    Property Inspector     oracle.ide.inspector     11.1.1.4.37.59.31     Loaded
    QuickDiff     oracle.ide.quickdiff     11.1.1.4.37.59.31     Loaded
    Replace With     oracle.ide.replace     11.1.1.4.37.59.31     Loaded
    Runner     oracle.ide.runner     11.1.1.4.37.59.31     Loaded
    SQL Developer Patch     oracle.sqldeveloper.patch     11.1.2.04.39     Loaded
    VHV     oracle.ide.vhv     11.1.1.4.37.59.31     Loaded
    Versioning Support     oracle.jdeveloper.vcs     11.1.1.4.37.59.31     Loaded
    Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.4.37.59.31     Loaded
    Virtual File System     oracle.ide.vfs     11.1.1.4.37.59.31     Loaded
    Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.4.37.59.31     Loaded
    XML Editing Framework IDE Extension     oracle.ide.xmlef     11.1.1.4.37.59.31     Loaded
    audit     oracle.ide.audit     11.1.1.4.37.59.31     Loaded
    classpath: protocol handler extension     oracle.jdeveloper.classpath     11.1.1.0.0     Loaded
    jdukshare     oracle.bm.jdukshare     11.1.1.4.37.59.31     Loaded
    mof-xmi     oracle.mof.xmi     11.1.1.4.37.59.31     Loaded
    oracle.ide.dependency     oracle.ide.dependency     11.1.1.4.37.59.31     Loaded
    oracle.ide.indexing     oracle.ide.indexing     11.1.1.4.37.59.31     Loaded
    palette2     oracle.ide.palette2     11.1.1.4.37.59.31     Loaded
    status     oracle.ide.status     11.1.1.4.37.59.31     Loaded

    It doesn't sound like this is the answer in your case, but here is a problem I had with tree icons in 6i which took me a while to figure out.
    For some unknown and probably pointless reason, forms converts the tree query to uppercase before executing it. This can cause problems if the sql contains any hardcoded strings. In my case I was doing something like
    decode(status,1,'red',2,'green')||icon_name
    this resulted in REDicon when my icon was actually redicon.gif

  • My apple tv3  is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    My apple tv3, serial no. C07JWBZ9DRHN is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • Business Rules:Non-oracle db connections not shown in the ADF-BC Facts sect

    Hi everyone
    I'm working with Oracle BPM 11.1.1.5.0
    JDeverloper: 11.1.1.5.0
    Database : SQL Server 2008.
    I'm trying to create some rules based on some value in my tables in the database.
    The problem:
    My non-oracle DB connections are not shown in my Business rule, in the ADF-BC Facts section on the Facts tab.
    I have two oracle db connections and one SQL Server connection, and all three have been working perfectly before.
    But in the business rules facts section, when I want to add a new ADF-BC fact, only the oracle connections are shown.
    I have tried recreating all of them a few times, re registering my sqljdbc jar file, creating a new test application from scratch, but none seems to work.
    Can some one give me any hint please?
    Thanks in advance

    has anyone else had this problem ?

  • My timecapsules loses connection with the modem if it is not shown in dock. Can anyone please tell me what I have to do

    I have timecapsule 2TB. Till one month back it was working fine. Now the internet is connected only if it is shown in dock. If it is removed from the Dock the connection is getting lost. How Can I connect the internet even if it is not shown in the dock

    Post a screenshot of the TC in the dock showing the settings.
    You need to describe the whole network so we can understand how you are connecting to the TC and what is happening. We do not have enough info to solve this.
    But I do suggest you factory reset the TC and start over with a clean setup. Use ethernet if possible.. both TC to the main modem/router and ethenret to the computer. WIreless is never as reliable.

  • Airport Extreme-Airport Utility SAYS I'm connected to internet but I'm not

    Have several apple computers connected via ethernet to ATT DSL; was using a Netgear router...but it was SLOW SLOW SLOW to open new internet pages: trouble shooting with AT&T proved that when I hooked my computer direct to modem, internet speed was FAST; so problem was Netgear router.
    So I hopped to Apple store and bought Airport Extreme. Completed setup per instructions...Network preferences says I am connected to the internet, the Airport Utility says I am hooked up to the internet; proper lights are ON for both the modem and Airport Extreme unit, yet when I click on Safari it says I am NOT connected to the internet....ummmmm...I have no idea what to try next...any ideas, please????

    I realize that I made a slight error in my initial description; all the computers are attached to a switch, which is in turn attached to the Airport Extreme which is in turn attached to the modem.
    Thanks for your speedy reply!!! My husband says we are not using a PPPoE connection, but rather a DHPC connection, so the PPPoE senario doesn't apply.
    Any other ideas????
    Thanks, Barb

  • I have both an iPod and Ipad 2. Latest I have sync. ipod. Now when I want to sync. iPad 2 in iTunes its only iPod mentioned in sync. window and it does not help to connect iPad. its not shown in iTunes. What to do next?

    I have both an iPod and iPad 2. Latest I have sync. iPod and now I want to sync iPad, but iPad is not shown in iTunes when connected. I have the latest iTunes version.

    If your computer starts image capture or some other camera software you should be able to quit that and then your iPad will show up in iTunes. Mine does this all the time.
    The preference on what to start up when a "camera" is connected is found in Image Capture. So start Image Capture. It's in the applications > Utility folder. Then look for preferences. In my version it's in the lower left corner. Select None or Nothing and quit the program. From then on your iPad should show correctly in iTunes. But you will most likely have to start your smear software manually when you do connect a camera to your computer.

  • Airport not connecting...not working

    A few days ago, (what seemed like) the power supply went on my Time Capsule.  I found this very disappointing to see the product fail like that.  Since then, I connected my wireless network through my Airport Express.  It worked for a few days, and then lost connection to the internet.  It still has a power supply, but it won't connect.  Now it is just blinking orange (even though when it lost connection, it was solid green).  I have had to take the ethernet cable out of it and connect directly to my computer.
    The Airport Express is still plugged in and is now still blinking orange.  I say now, because, even when it was solid green, it wasn't allowing my computer to connect to the internet.  I have gone through just about every troubleshooting step imaginable, including resetting my cable modem and calling my cable company, Airport Utility....  Every time I use Airport Utility and try to connect to my network, it tells me either there was a "connection timeout" or that it failed to connect and that I need to make sure the network name or password are correct (they are correct).  Now I can't get the Airport Express to stop blinking orange, or to stay green.  In fact, I can't seem to do anything to get my computer to recognize it.  It is as though it is invisible, so it won't even let me troubleshoot what is wrong with it.  What happened to the days where "Apple" was just so darn easy?
    At this point, I really don't know what to do and I am starting to lose a little faith in Apple products.
    What am I missing here to get this thing corrected?

    Hi, I have a very similar problem, and I can not find a solution:
    I have an Intel iMac and Im using a BT Voyager 2091 as my router.
    The router is set up and working with my PC.
    Airport is recieving the signal from the router but when I open Safari it is saying I am not connected to the internet.
    I then plugged the Ethernet cable from the router to the iMac and I got the internet straight away. I am sure the problem is with airport and I have tried many different things to get it working but still no luck.
    Can anyone help?
    Thanks

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

  • HT3466 Airport has self assigned IP address 169.254.153.51 and will not be able to connect to the Internet

    Cannot  connect to internet wirelessly because I get the message "AirPort has the self-assigned IP address 169.254.153.51 and will not be able to connect to the Internet."

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • I have no longer been able to connect to the internet as aiport continueously tells me that "airport has selfassigned ip address and will not be able to connect to the internet.

    Up until about a week ago I have not had a single internet connectivity problem.  Then, all of the sudden airport will no longer connect and it keeps telling me that "Airport has self-assigned IP address and will not be able to connect to the internet." I did not change any settings, I didn't touch anything and all of the sudden it just will not connect anymore.  Any help would be appreciated. Thanks!:)

    These steps often sort out this problem...
    System Preferences > Network
    Select the AirPort from the left hand side
    Click on the Locations combo box and select Edit Locations...
    Click on + to add a new location, call it "Home" (or anything else you prefer)
    Click on Advanced
    Select the AirPort tab and enter your network name
    Select TCP/IP tab. 
    Configure IPv4 Using DHCP
    Now click on Renew DHCP Lease.  After a few seconds you should get an IP address (probably 192.168.x.x)
    Click on Proxies tab.
    Select Auto Proxy Discovery and Use Passive FTP
    Click on OK and Apply, etc.
    Bob

  • HT1338 my airport is not working getting Wi-Fi has the self-assigned IP address 169.254.5.29 and will not be able to connect to the Internet

    my wi fi wont work giving me this Wi-Fi has the self-assigned IP address 169.254.5.29 and will not be able to connect to the Internet whats up with the airport how do i fix it

    See this discussion.
    Wi-Fi has the self-assigned IP address
    Troubleshooting suggestions.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

Maybe you are looking for

  • How to create a formula based condition in bex query designer

    hi all, i have scenario in query designer where i need to calculate Key performance indexes based on characters and key figures iam using.for example the condition is like: "if call received is less than call projection then give call received else n

  • How to install downloaded Oracle Forms Developer/Services 6i Release 2 for linux

    Hi folks, I downloaded d2k6irelease2.tar (Oracle Forms Developer/Services 6i Release 2 for linux) from http://otn.oracle.com/software/products/forms/htdocs/linuxsoft.html I untar the file on my linux machine however the extracted files don't seem to

  • I cannot post hyperlinks in a forum posting field

    Running 3.6.8, I have recently been unable to post hyperlinks in a forum reply field. Any attempt to insert a Smiley results in the Smiley being pasted at the beginning of the text rather than at the cursor point. Inserting an embed link to Youtube a

  • Mapping Midi Controller

    I'm trying to control Logic's software instruments using my controller, but when I am in the controller assignments window, it will only let me map one parameter. Every time that I change from, say cutoff to attack, it changes the initial message i t

  • Can I have a "Speed Dial" or "Fast Dial" as my home page for Safari?

    Is there anyway to do this? I would really like to be able to have Safari set up with some type of Speed dial. For those of you who dont know, its basically a home page with about 9 different thumbnails that are constantly logged into their own sites