Airport Not Working After iOS8 Update

Hi,
Last night I updated my iPad to iOS8.
I was then invited to update the Airport Utility to make it work with iOS8.
The download & installation appeared to have completed successfully, but then I received the same message to update it. I ran the procedure again, following which I got the same message.
The router now has a flashing amber light & is unusable.
I have tried unplugging/reconnecting the mains lead. I have tried using the reset button. I have tried doing both together. Neither the iPad or my computer can see the router.
Can anyone help, please?

I spent several hours with Apple support today: the issue kept getting escalated  as it was unable to be resolved by the person I was talking to at each level.
To cut a long story short: unable to resolve it, the unit will be repaired/replaced under warranty. They are very interested in getting hold of my failed unit to inspect it & figure out what has happened to it.
Many thanks to everyone I spoke to: they were all very interested, courteous & as helpful as possible. Excellent customer service.

Similar Messages

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

  • Push email not working after ios8 update

    I have updated my iPad air and my iPhone 5 to ios8.
    Both devices have the same email accounts.
    The ipad email push works fine after the update on all accounts.
    But, on the iPhone I do not get email update for hours unless I physically go into the email app.
    Is there a fix for this issue? I have tried everything from deleting and re-establishing the accounts. This happened on ios6 and 7.
    Come on Apple, get with the program!
    Vern

    I have the same issue with my iPhone 6 plus. My email no longer pushes with the Mail app. I have to fetch it. What's going on Apple?

  • Sounds in apps not working after iOS8 update

    Has anyone else had issues with apps not playing sound after the update? I have a 5S and have reset it with no luck; sound plays through earbuds just fine, also plays the typing sound without earbuds. Seeing this with YouTube and Facebook as well as other embedded media.

    Has anyone else had issues with apps not playing sound after the update? I have a 5S and have reset it with no luck; sound plays through earbuds just fine, also plays the typing sound without earbuds. Seeing this with YouTube and Facebook as well as other embedded media.

  • Airtunes and Airport not working after Itunes update

    Help
    I have a new airport and before updating to the new version of iTunes it worked perfectly. Now the green light flashes (an option I ticked to show activity) but no music comes from the device. I have seen other users here with the same problem: http://discussions.apple.com/thread.jspa?messageID=8147595
    Does anyone know how to fix this?
    Thanks
    James

    Same problem here.
    My base station, which is newer, is working still, but the latest iTunes update knocked out my older AirPort Express.
    I've tried many times to reset the Express with a paperclip but no results. After resetting the Express, AirPort Utility reads it through a scan, but when I try to add Express to my existing network it drops out and fails to reconnect.
    I'm stuck with a flashing yellow light. AirPort Utility can't pick it up in another scan unless I go back and reset the Express with a paperclip and the process starts all over again.
    Message was edited by: jkh

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • E7 Nokia Messaging not working after anna update

    hi
    nokia messaging not working after anna update. when i
    -choose provider (hotmail/gmail/yahoo...etc)
    -enter username & password
    -click OK to T&C
    -get error message: "cannot enable this service on the device"
    any ideas?

    I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • Jquery content not working after the updates from firefox

    Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
    Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
    The banner URL is http://www.irs.com.my/slider/index.html

    SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
    I studied the script before discovering that and found two issues, but there might be more:
    (1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
    firefox2:F.match(/firefox\/2/)?true:false
    (2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

Maybe you are looking for

  • Using a personal domain name

    I am trying to use a personal domain name with my iWeb page. I found the directions to do so - it says go to File>Set Up Personal Domain. I am using iWeb 06 and I do not have an option under File (or anywhere else) to "set up personal domain". What a

  • Display only the last record per material in SAP query

    Hi, I have created a SAP Query using the quickviewer that is a join between 2 tables (MSEG and MKPF) that consist of material document information and date of posting. The results are fine however I would like only the last record per material to be

  • Renaming a spatial table.

    Hi, I would like to hear any suggestions or best practice to do this., I have a oracle spatial 10g, we have a table (with 35m rows-sdo_geometry =>current_table) and a row in the user sdo geom metadata table. We are planning to add new table (similar

  • IMovie9 user guide?

    I bought the Missing Manual for iMovie HD that was a huge help in learning the application.  I am wondering if there is a similar book for iMovie 9 that is recommended? TIA. Mike

  • Ipod 5 generation sync when connected but don't work after that

    Dear users, I just would like to know if somebody could help me out with this. I changed my computer and have a new clean hardisk. I reinstall Itunes of course. I couldn't sync my Ipod who still full and was obliged to erase all the files from the Ip