Airport performance slow after 10.5.8 upgrade

After the 10.5.8 OS upgrade I noticed that my MBPro's wifi internet was really slow, less than 2Mbps when it should be 10 - 15Mbps! I thought it was Comcast but tested the speed with the LAN Ethernet connected and the speed was normal. I tested it on my wife's black MacBook 13 inch and got slow speed on WiFi too.
I tested the speed on my hackintosh Dell Mini 9's WiFi and the speed was nice at 15Mbps. So I figured it was a firmware issue. I couldn't find anything similar to my problem here in the discussion so I was going to post the issue but then, as if Apple magically saw my issue, I received an Software Update notice about an update for the Airport Client that fixes performance issues when running on battery. So I ran the update and it fixed the problem. So for those of you out there who are wondering why their MacBook Pro and MacBook 13 has slow bandwidth, try the update.
DLP

I have the same with my NAS. In the beginning of Leopard the same thing happened, with the connect to the server a Finder window of the disk would open. But in the last 4-5 version everything went as it was supposed to. And now I end up with all these open windows ;-(. Annoying.
Detail, I connect using a SMB server.
Would appreciate it very much if this is solved in the near future.
Message was edited by: ArjanM

Similar Messages

  • Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

    ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

    Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

  • My airport is slow after upgrading to snow leopard

    my airport is slow, however when pluged in internet is normal speed. Airport crawls

    No, everything else is fine. I even used a wireless adapter I had laying around and it was twice the speed as the airport card, so it does'nt appear to be my network. Maybe a bad airport card?

  • Browser Load Slow after 10.4.6 upgrade

    All my browsers - Safari, Camino, Firefox - load pages really, really slow after upgrading to 10.4.6. The browsers are all the latest versions. I've read it could have something to do with the recent Java update, but haven't found a good way to resolve the issue. My internet connection is fine.
    Any suggestions? Thanks. Terry.

    I have 4.2.2.1 and 4.2.2.2 set in at least one of my locations. I havenn't noticed that much diff' personally. Many do gain from this inclusion. It's fairly well known by now.
    I guess the main point would be that it is an ISP issue as opposed to a Safari problem.
    Apple Forums are under supported and sometimes won't load. When I get puzzled I use http://www.dslreports.com/forum/macdsl as a Test. It is an interesting Apple oriented site and loads "instantaneously" for me.
    Good Luck, JP

  • Battery performance worst after 5.0.1 upgrade

    Battery performance worst after IOS 5.0.1 upgrade. I Did upgrade my iphone yesterday and I notice the battery has ran out faster today after 6hours in standbay and 2.30 hours of use. Hopping to get final update that fix this issue.

    ok, do you have a technical support question?

  • Why is my macbook pro running slow after os x yosemite upgrade

    Why is my macbook pro running so slow after os x yosemite upgrade

    Please describe the problem in as much relevant detail as possible. The better your description, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • Photoshop CS6 Running Slow After GPU/RAM/CPU Upgrade?

    Hi all,
    I recently upgraded my Mac Pro 1,1 with the following:
    CPU Upgrade to 2 x 2.66GHz Quad Core
    RAM Upgrade to 14GB
    GFX Upgrade to ATI Radeon HD 5770 1024mb VRAM
    Everything seems fine. My temperatures are normal and things are seemingly speedy.
    My problem is that Photoshop CS6 seems to run a little slow. I'm only working on web files (72dpi) that are yes, sometimes quite long in length (5000px high), but that has never been an issue.
    Some problems I've noticed:
    When I click to edit text, it may take 2 seconds before I can start editing it
    When I scroll upwards it chugs a little
    If I grab an object/shape and drag it around too quick, it might lag a little
    I'm not sure how to explain it really, but for the couple hundred dollars I spent on upgrading my maching, I wouldn't expect any of these things to be an issue.
    Here are my photoshop performance settings:
    Any suggestions would help. No trolls please.

    thenewbeatTO wrote:
    Any suggestions would help. No trolls please.
    Something to try:  Reset Photoshop's preferences to defaults.
    Press and hold Command - Shift - Option immediately upon cold-starting Photoshop.  If you get the keys down quickly enough - and you have to be very quick - you'll get a prompt asking you to confirm deleting your current preferences.  Once you confirm that, Photoshop will start up with a default set of parameters, though you will still find you can select your named workspaces and (I believe) your Actions will all still be there.
    Try immediately to see if the problem recurs.  Then methodically make your preferred preferences changes, quit Photoshop, and restart, then test to see that the problem hasn't recurred.
    With some luck, you'll have cleared up the sluggishness, and will have been able to make all your preferences changes you like without it recurring.
    This really can work.
    -Noel

  • Powerbook G4 Running SLOW after 10.4.4 upgrade

    I am new to Mac and just set up a new PBG4. I installed all of the updates as soon as I set-up OSX for the first time. Now, everything runs slow, especially Safari. Anyone else experiencing this? Any suggestions?

    How did you upgrade to 10.4.4? Did you use the Combo Updater or the one provided via Software Update? If the latter, I suggest you download the Combo Updater and reinstall the update. Before doing so, however, do the following:
    Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the computer continues to run slow then I suggest downloading one of the several cache cleaning and maintenance utilities and clean out all your caches, run the maintenance scripts, and check for bad fonts. Read the FAQs on optimization and maintenance at The XLab FAQs. Contrary to other advice repairing permissions will not make OS X run faster.

  • Wifi very slow after iOS 6.1 upgrade

    Per iOS 6.1 I had no problems with my phones wifi.  After the upgrade however the phone will connect to it but data transmission is extremely slow.  Speed tests show that my connection speed on wifi is under 2Mb as where before the upgrade it was around 30.  Mail will not download now either without turning off wifi and going to lte.  Have also noticed that lte will randomly turn off and go to 4g while I am using it.  The phone usually then goes to no signal and then back to full.

    My
    iPhone 4s
    on ios 6.1 is so slow ..... I am getting irritated first time with apple product mainly after step up on ios 6. Everything works great in ios 5.1.1 .....
    Please fix this I cant download movies from itunes It takes so much time.....

  • Airport express slow after configuration, why?

    OS X 10.4.2, dual 867 g4 (Sonnet pci 802.11 g) and imac flat screen 10.4 (airport card) and airport express: When I logged in through the airport express on first usage (with generic apple xxxxxx network name), the road runner speed test was showing a connection speed of about 1.5Mbps on both computers. After I configure the express (it came with the 6.2 basestation firmware installed) for our network names, security, etc. the road runner speed test shows the connection speed slowing to 90-100kbps.
    Any thoughts about why this is happening, or how to rectify situation? Obviously the hardware is ok, but the software after configuration reduces through put drastically.
    Thanks,
    Teg

    Thanks for your reply. I installed the 6.1.1 firmware, but the same problem continues. When using the road runner connection speed test, the connection will frequently start out at a decent rate (1.5 Mbps) but fall off rapidly, in 2-3 seconds, down to a poor connection rate of 90-100 kbps. When I connect to the cable modem by ethernet cable the connect speed is in the 3-4 Mbps range consistently. My wireless connection appears consistently to be all four black bars in the menu bar.
    I tried down grading the airport version from 4.2, but the system would not allow that.
    Is this problem in the Airport Express, the airport 4.2 software, the os 10.4.2, or what? Any guesses?

  • IPhone slow after OS 4.1 upgrade

    Hi
    after upgrading to iOS4.1 my Iphone 3G has become considerably slow compares to how it was with 3.1 and i was wandering how i can solve the problem.
    tried a restore but nope.
    slowest application seems to be the calendar which is the one i use the most
    it is quite annoying as it takes time to respond when i type something in and take some xtra time to load any app.
    anyone having same issue? any help? thanx.

    Hey there, I own an iPhone 3G with iOS 4.1 as well, and it runs alot smoother than the 3.1.2 that i was running before. The only advice i can offer you is to go to Settings>General>Reset>Erase All Content And Settings. (I advise you sync your iPhone first.) it will take about an hour and it is a master reset so you'll have to re-sync it and reinstall everything back the way you had it. Let me know if it helped!! And if there is anything else i can help you with.
    Thanks, SCSmith443

  • Lenovo B590 I3 slow after Windows 8.1 upgrade

    Am looking for the best fix for slow laptop after Windows upgrade from 8 to 8.1

    Dear, alanj9za and somran. Mostly laptop runs slow issue occurs due to broken Windows registry entries. Fixing registry will help you to boost up your laptop. You need to download and install a Registry Cleaner program to fix corrupt or broken registry entries. To download a reliable registry cleaner, go to famous website download.cnet and search there Reginout. Which I personally use and recommend the friends. After downloading run all of its tools one by one except Internet Optimizer, to clean all the junks and registry errors from your computer.

  • Mac Book Pro runs slow after Lion 7.2 upgrade

    Ever since I downloaded the Lion 10.7.2 my MBook Pro runs SLOW! Any thoughts or suggestions?

    Reinstall preferably from scratch:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Safari extremely slow after 10.5.4 upgrade

    After recently updating to 10.5.4 Safari has become a problem.
    I use Airport Extreme connected to an ADSL router and this has always worked brilliantly, but since the latest update Safari is not downloading internet pages with the same reliability or speed.
    This is not due to 10.5.4 affecting the wireless network as Firefox has no such problem. The broadband speed tests results I am getting demonstrate this.
    Safari Version 3.1.2 (5525.20.1): line speed is 301 kbps (0.3 Mbps) & download speed is 38 KB/s (0.04 MB/s).
    Firefox: line speed is 1.48 Mbps (1478 kbps)& download speed is 185 KB/s (0.18 MB/s).
    I have repeated this test probably half a dozen times over the past two days and get the same result.
    I have run repair permissions - still have this problem.
    Thanks in advance for any suggestions

    hi i had your exact same problem
    only thing that could solve this was backing up my files and do a clean install, and then update back again
    and now everything works just fine

  • Sending mail very slow after 10.9.5 upgrade.

    I upgraded to 10.9.5 yesterday and ever since then, sending mail (using Mail.app) is very, very slow or the emails do not get sent and stay stuck in my Outbox.
    Is anyone else experiencing this?
    I've deleted my iCloud account and re-added it and it didn't help.

    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

Maybe you are looking for

  • IF_IXML : How can i add encoding with value UTF-8 to the document object??

    Hi i want to create a xml file with the following content: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://....">  </OpenSearchDescription> i did this with the if_ixml interface and rendered the content in a file 'D:\usr\s

  • Help Required in BPS trasport

    Hi, I have created one new parameter Group in existing area level and function .Other parameter group already exist for that function. Tried to trasport parameter group using  UPC_TRANSPORT_BPS_ALL . Filled following  PLANNING AREA PLANNING LVL PLANN

  • Setenv from a servlet (all on solaris)

    Hi, I have read the previous discussions about setting system env variables from java programs, but my problem is more specific: The servlet can execute (through the Runtime class) the 'env' command, and return a list of its env, but when I try addin

  • How to enable PDO_MYSQL in 5.2.4 PHP included into Leopard

    I get it all working but getting an error: uncaught exception 'PDOException' with message 'could not find driver'. It looks like there is no PDO-MYSQL in phpinfo configuration list. On dreamhost (and on my old tiger): PDO support enabled PDO drivers

  • 2004s - Users in LDAP,

    I have modified the UME xml file, and am now pulling my users from our (readonly) ldap server(s). The users apppear to be successfully imported - I can login with a UME DB user, and search for users that exist only in LDAP. I can also login with an L