Airport problems after update Airport Extreeme 2008-004 V.1

Since when i have installed the update Airport Extreeme 2008-004 V.1 my Airport card is giving me problems. The network seams to go down and if i reset the Airport it restart working for a certain time. I have noted that the problem apears most of the times when Time Machine starts the backup on the Capsule (but this is not 100% sure).
I am quite sure the problem is the update because i never had this before.
This is the log..
03/11/08 17:10:31 kernel AirPort: Link Down on en1
03/11/08 17:10:31 configd[14] AppleTalk shutdown
03/11/08 17:10:31 kernel vmnet: bridge-en1: interface en is going DOWN
03/11/08 17:10:31 kernel vmnet: bridge-en1: interface en is going DOWN
03/11/08 17:10:31 configd[14] AppleTalk shutdown complete
03/11/08 17:10:32 mDNSResponder[16] ERROR: mDNSPlatformTCPConnect - connect failed: socket 47: Error 50 Network is down
03/11/08 17:10:32 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096459555
03/11/08 17:10:32 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096459555
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096459798
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096459798
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096460048
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096460048
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096460298
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096460298
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096460549
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096460549
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/4 to 224.0.0.251:5353 skt 7 error -1 errno 50 (Network is down) 4096460649
03/11/08 17:10:33 mDNSResponder[16] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00823000 en1/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 4096460649
03/11/08 17:10:35 kernel en1: 802.11d country code set to 'IT'.
03/11/08 17:10:35 kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 40 48 56 64 104 112 120 128 136 36 44 52 60 100
03/11/08 17:10:35 kernel vmnet: VMNetDisconnect called for port 0x560bc00
03/11/08 17:10:35 kernel vmnet: bridge-en1: filter detached
03/11/08 17:10:35 kernel vmnet: bridge-en1: down
03/11/08 17:10:35 kernel vmnet: bridge-en1: detached
03/11/08 17:10:35 kernel vmnet: Freeing hub at 0x4516800.
03/11/08 17:10:38 kernel Auth timed out
03/11/08 17:10:38 airportd[776] Error: Apple80211Associate() failed -6
03/11/08 17:10:38 airportd[776] Could not find any preferred networks; trying broadcast requests..
03/11/08 17:10:42 ntpd[27] sendto(17.72.255.11) (fd=27): Can't assign requested address
03/11/08 17:10:43 kernel MAC AUTH succeeded
03/11/08 17:10:43 configd[14] AppleTalk startup
03/11/08 17:10:43 kernel AirPort: Link Up on en1
03/11/08 17:10:43 kernel vmnet: VNetUserIf_Create: created userIf at 0x8a8e000.
03/11/08 17:10:43 kernel vmnet: VMNetConnect: returning port 0x8a8e000
03/11/08 17:10:43 kernel vmnet: Hub 0 does not exist, allocating memory.
03/11/08 17:10:43 kernel vmnet: Allocated hub 0x58b7000 for hubNum 0.
03/11/08 17:10:43 kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:e7:76:aa
03/11/08 17:10:43 kernel vmnet: Hub 0
03/11/08 17:10:43 kernel vmnet: Port 0
03/11/08 17:10:43 kernel vmnet: bridge-en1: got dev 0x47e2604
03/11/08 17:10:43 kernel vmnet: bridge-en1: wireless interface detected.
03/11/08 17:10:43 kernel vmnet: bridge-en1: up
03/11/08 17:10:43 kernel vmnet: bridge-en1: attached
03/11/08 17:10:43 kernel vmnet: VNetUserIfFree: freeing userIf at 0x8a8e000.
03/11/08 17:10:48 com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 3 seconds
03/11/08 17:10:48 configd[14] AppleTalk startup complete
03/11/08 17:11:00 kernel AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Disco Time Capsule
03/11/08 17:11:00 kernel AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Disco Time Capsule
03/11/08 17:13:55 ntpd[27] time reset +1.161678 s
03/11/08 17:16:48 /usr/sbin/ocspd[796] starting
03/11/08 17:24:54 kernel AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Disco Time Capsule
Do you know how to remove the update ?
Thanks
M.

Did you disconnect all devices from your computer when troubleshooting? Did you restart your computer?
If yes to the above, you may wish to try the repair disk option. Run +repair disk+ from your software install DVD.
"How to get support from Apple ?"
By calling Apple Tech Support.
CLICK---> International Support Phone #s to find the Italia number.
If you have AppleCare and/or your computer is still under its one year warranty, the call is free. If you are out of warranty, you will be charged for tech support.
Please be advised that these are _*user to user*_ forums.
"This is software bug !"
Then notify Apple by completing CLICK---> Product Feedback
The only way I know of removing AE update is to do an Archive & Install. Then use Software Update to upgrade your OS and software. Stop at the AE upgrade you do not want.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
IMPORTANT: Make sure you select "preserve user preferences and data" when you performed the A&I?

Similar Messages

  • Airport Problems after update and trouble shooting

    Hi There,
    I have an Intel iMac and after updating airport i've been having problems with it. I'll be using the internet and all of a sudden it will just disconnect and cannot detect any network connections. Now, i've seen the other posting already about fixing this problem, and I have done what it says to fix the problem by moving the system configuration folder and the com.apple.systempreferences.plist file. After I do this, it works for a few hours but then i have the same problem again. The folder and the file is recreating and i have to follow the same steps and move them again, but then every few hours it keeps getting recreating. Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network. Is there a way to reset Airport to the way it was before i installed the update?
    Thanks

    "Is there a way to reset Airport to the way it was before i installed the update?"
    Of course you can erase your hard drive and reinstall up to 10.4.7, and not go any higher. The problem is the 10.4.8 update, or some part of it. The many other updates recently posted for different apps are not part of the cause, so those updates can be installed.
    "Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network."
    Yes, once you've followed the "restart twice" instructions involving preference file deletion, it appears that by turning off AirPort before letting it sleep, restart, or shut down, those two files will not get the same corruption recreated. Afterwards, you should be able to turn on AirPort and after a slight delay of about six to eight seconds AirPort will be able to reacquire your network.
    If you forget to turn off AirPort before sleep, restart, or shutdown, then those files will again be corrupted and you'll have to go through the process all over again. I ran through it about 50 times, changing this and that, and that's all I could come up with.
    Hopefully someone else out there with a different perspective will be able to figure out what else needs to be done.

  • Problems After Updating Airport Extreme Software & Firmware

    Lost wireless connection to my printer while attempting printing from either desktop or laptop & when I tried to re-establish/update the wireless settings, I received message that new versions of software & firmware were available for my Airport Extreme. After I downloaded & installed both of these, I could no longer connect at all to the Airport Extreme. When I used the Airport Assistant to try to solve problems, it said airport was out of range. Also only got flashing amber light on Airport Extreme no matter how many times I tried to reset it and DSL modem (went through complete re-connect/re-install of both Airport Extreme and DSL modem hardware). I switched to an extra Airport Express I have and now everything is backing working again. Any known problems with either the latest Airport Extreme software (Airport Utility 5.3.2) or firmware (version 7.3.2 I think)?

    Firstly, on the Mac you use to configure the AEB, Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
    I see you are using 10.4.11, so the steps in Part B may be a little different (this is for 10.5.x).
    Use this procedure to setup your network again:
    A. Setup the 'Main' Base Station
    1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main) - leave off for at least 5 minutes to allow servers to reset.
    2. Check that ethernet cables are connected properly:
    - DSL Modem > AEB (main) WAN port;
    - AEB (main) ethernet port > Mac computer running OS X 10.5.x.
    3. Power-on DSL Modem and wait for it to initialise.
    4. Power-on the AEB (main) and start your Mac computer.
    5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
    6. Select 'I don't have a wireless network and I want to create one', click Continue.
    7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
    8. Select 'I connect to the Internet with a DSL or cable modem using DHCP'. Click 'Continue'.
    9. Click 'Update' and wait for the AEB (main) to restart.
    10. Disconnect the ethernet cable between your Mac and the AEB (main).
    B. Setup Client computer
    1. Open System Preferences/Network/AirPort.
    2. Against 'Network Name:' select your network (the name you gave it at A7).
    3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
    4. Click 'Apply' and exit System Preferences.

  • Wifi problems after update airport configuration

    Hello, i have a question about my wifi. After i installed airport configuration 6.1 my computer said there is no wifi hardware installed. Does anybody knows how to fix this?
    Or to get back to 6.0 ?

    Thank you.
    The problem is that I used to have a wifi network that let me go on the internet from my iPad, iPhone and laptop. Two days ago, it disappeared: no access to the internet via wifi from anywhere but my desktop. The old wifi network isn't listed anywhere, on my desktop or other devices that detect wifi.
    I access the internet via ethernet from my desktop, via virgin media.
    What I want to do is get a home network up and running again. Originally, it was all automatic - I didn't have to know anything to get it working. Then I followed some nifty spec on the forum to slightly alter the address of the device, and my other devices, so that I could use my computer's wifi from my Kindle. For the next 9 months, no problems. Then I casually updated the airport utility and poof, the wifi network vanished. And I don't know how to get a DHCP ID or anything else, because I didn't have to do it originally. I just plugged in my computer and did what I was told to.
    This sounds so pathetic. I'm sorry. Is there some way I can just start all over again?

  • Airport problems after update

    I have been using my 20" Intel iMac for a few months now and have had no problems getting the built-in airport device to connect to my wireless home network. Yesterday, I downloaded and installed the new airport system update, and ever since I've been having big trouble. It doesn't show any available network connection at all (and I know my wireles network is working because my laptop can still connect). If I restart the computer, sometimes it will find my network and sign on, but then it drops the connection after just a few minutes and goes back to saying it can't detect any available networks. Has anyone else had any problems since the new update? Any suggestions on what to do? Thanks.

    Unfortunately, I can't get any of your suggestions to work. If I restart the computer and go through the Network Diagnostics set-up, I can sometimes get it to find my home network and connect, though not everytime. The connection might last from 2 minutes to an hour or more, but then it is inevitably lost, and Airport shows no available networks, even though my MacBook is still connected to my home network and shows several other available networks from neighbors' houses, too. It seems like it must be a software problem since I had no problems before the update. Does anyone know anything else I can try short of taking it in to an Apple Store? Thanks for all your suggestions.

  • Bluetooth problem after update to lollipop

    Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've  observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected .   PLEASE HEEELP !  

    Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
    - Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Photoshop CS2 problems after updating to 10.4.5.?

    Anybody notice Photoshop CS problems after updating to 10.4.5.?

    Hello I had the same problem
    I found the following information that helped me.....
    Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
    Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
    Issue
    Adobe Photoshop CS2 returns one of the following error messages:
    "Could not complete your request because of a program error" when you try to open a file.
    "Could not create a new document because of a program error" when you try to create a new file.
    Solution 1:
    Install the most recent update to Mac OS.
    Solution 2:
    Re-create your preferences files.
    1. Hold CommandOptionShift when you start Photoshop.
    2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Solution 3:
    Disconnect your Internet connection.
    To disconnect your Internet connection, do one of the following:
    If you are connected to the Internet via a telephone modem, then disconnect from the modem.
    If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
    Solution 4:
    Use a disk repair utility.
    Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
    Solution 5:
    Ensure that all your drivers are compatible with Mac OS X v10.4.
    Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
    Solution 6:
    Re-create your printers in Mac OS X.
    To re-create your printers, first delete them and then add them again.
    To delete your printers:
    1. Open System Preferences from the Apple menu.
    2. Select Print & Fax, and click Printing.
    3. Select each printer in the list and click the delete key (the minus key).
    For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
    The one that fixed it for me was solution 6 -- re-creating my printers
    I don't know why but it could be worth a try
    Good luck
    ADAM
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook + G3 iMac   Mac OS X (10.4.5)  

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

  • Flash player problem after updating to belle on my...

    flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz  help or tell me the way to downgrade to anna
    Attachments:
    scr000002.jpg ‏10 KB

    1) product code  059B7W0
    2) software version 111.030.0609
    3) it is actually stored .flv files on my phone  workes fine on symbian anna
    Attachments:
    Scr000003.jpg ‏17 KB
    Scr000004.jpg ‏15 KB

  • Anyone has any problem after updating to iSO 4.3.1 ?

    anyone has any problem after updating to iSO 4.3.1 ?
    I would like to know before updating mine.

    My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
    So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
    It you haven't already guessed, I'm more than a little ****** off.
    If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
    If its not right by the weekend I'm taking it back to the shop I bought it.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

Maybe you are looking for