Airport question for psp

I tried conecting the airport to my psp, but it says error can't find #(forgot the number), it found the base, and the pppoe but there still an error...
Also I tried resetting the airport to no luck .
laptop   Mac OS X (10.3.9)  

ok:
communication with the server failed
A DNS error has occured
(80410410)
that's exactly how it looks like.
laptop   Mac OS X (10.3.9)  

Similar Messages

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • Airport Question for a Mac Newbie

    I just got a Macbook Pro and I also bought the Airport Extreme. When I click on the Airport Icon I can see about 15 or so different networks at any given time. I have a 2 part question. First how do I know which network/router is mine? How can I rename the network that is listed? I am very new to Mac's and wireless networking. I just want to make sure that I have protected my network properly. I set up a password for WAP is that all I need to do? One last thing, is there anyway I can make sure that I am protected properly? Thanks Much!!!
    MacBook Pro 2GHz   Mac OS X (10.4.5)  

    A question eh? My counting must be off I see at least 4 question marks...
    You know which router is yours because you set it up and named it. If you still can't figure it out you should pick a better name. When you click on your network and type in your password you should be able to connect.
    To rename a network you will need to connect to it and run the AirPort Admin Utility which is location in the "Utilities" folder in your "Applications" folder.
    If by WAP you mean WPA then you are off to a great start. When you picked the password I hope you didn't make it too easy to guess. Try putting numbers, letters and symbols in it and you should make it at least 16 charaters long to be sure that you are safe (I use 24 characters).
    I would suggest looking at this tutorial from Apple - it might help answer some questions and should give you a better understanding:
    http://www.apple.com/support/panther/tutorials/internet/index.html

  • Airport utility for iPhone question...

    Hi,
    The airport utility for my iPhone does not show the client list, the utility on the iPad does show the
    Client list... Am I holding it wrong?
    Jerry

    Access to the DHCP or Wireless client lists do not seem to be an available options with the iPhone/iPod Touch version of the AirPort Utility.

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

    To expand on the question, I have performed the following steps:
    1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
    2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
    3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
    4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
    5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
    The WD disk is formatted as Mac OS Extended (Journaled).
    This is a big problem for me, as the drive houses my iTunes library.
    Anyone else had a similar problem? It all worked flawlessly until last week.

    I love computers.
    Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
    After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
    So - thought I would post my resolution in case it helps others.

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • Open DNS & Airport Question

    I have a wireless network (Airport Extreme and Airport Express for range in the back of my house). Have 4 Macs on the network. All have Open DNS set in System Prefs>Network>Airport>Advanced>DNS.
    Should I set one or both of the Airports to Open DNS also? If so, how? I looked at Airport Utility and see no ready way to do it.
    If I should add OPen DNS to Airport, can someone tell me how in an easy to follow fashion?
    Thanks in advance!

    No, sorry.
    All my machines are individually set for Open DNS: System Prefs>Network>Airport>Advanced>DNS: 208.67.222.222; 208.67.220.220.
    The machines have been set this way for a long time.
    My Q: Can/Should I set my Airports (Express and Extreme) somehow for Open DNS?
    My general configuration is:Cable>Modem>Airport>4 Macs.
    The hardware configuration is Cable into Router (Cox), Ethernet into Extreme, broadcast to Express 5 rooms away (to serve 2 of the 4 Macs); Ch 1 all.
    Perfect connection - so don't want to mess with that.
    Just want to know (if I can to speed up download time) --
    Would (if possible) setting the Airport settings to Open DNS help my speed? If so, how in the world would one do that - - > set the actual base station to have Open DNS settings?
    Make sense? Hope so!
    Thanks!
    Message was edited by: pcbjr

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

    hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

    I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Airport card for my g4 adp tower... I can't get it to work.

    I'm not very good with computers (when it comes to technical support). And I recently purchased an original airport card for my computer. I also burned the downloads onto a disc so that I would have the software. My computer has an operating system of 10.3.5. I downloaded the driver, turned off my computer, insterted the card and it pops up with an error that says it can't find the airport base station. What is this and do I need to buy something else for my computer? My internet connection is Comcast wireless. Any suggestions, thoughts or opinions would be greatly appreciated. Thanks for taking the time to read through a computer illiterates post...

    It sounds like you are trying to run either the Airport Setup Assistant or the Airport Admin Utility - and since this software is only of use to Airport Base Station owners (which you are not) this software is of no use to you.
    If your Airport card has been properly installed, you will see a fan-shaped icon near the right side of the MacOS menu bar - that is the Airport menu. Click on it, and a list of all in-range wireless networks will appear. The name of the wireless router supplied by Comcast should appear there - click on that name to connect to it. With some luck you will now get an internet connection.
    If there are no wireless networks displayed when you click on the Airport menu, recheck the installation of your Airport card - you probably forgot to attach the internal Airport antenna cable to its connector on the Airport card.

  • I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

    I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

    http://www.apple.com/support/itunes/contact/

  • Can somebody give some real time questions for alv report

    hi guru
    can somebody give some real time questions for alv report.
    answers also.
    regards
    subhasis.

    hi,
    The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports,  saving time which might otherwise have been spent on report enhancement
    The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
    Using ALV, we can have three types of reports:
       1. Simple Report
       2. Block Report
       3. Hierarchical Sequential Report
    <b>Reward useful points</b>
    Siva

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Maybe you are looking for