Airport randomly kills my router

Hi, I'm not sure if this is the same issue was the other huge airport connection topics because on top of my airport disconnecting randomly, it'll also sometimes kill the router's internet connection for all computers. It's only for a minute, but it's noticeable enough that it's very clear that only when my MBP is on it does it have this issue.
If this is the same issue as the other topics, what's the latest on a fix? I saw that Apple knew of it as early as January 25th.

Ok, nevermind. I decided to give it one last try, and I have no idea why, but now it's working. I've spent two days on this, and all of a sudden it just worked. No errors reading configurations on setup, no glitches in Airport Utility. Network is flawless. I feel like Clark Griswold plugging the Christmas lights in the final time. Nobody waste time reading this. Thanks to the ones who did.

Similar Messages

  • Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

    Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
    1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here.  Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
    2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here.  Forgive me if there is “too much information”.  I have to make a trip to the US to buy new networking equipment, so I very much want to get this right.  Once I return here, I’ll be pretty much stuck with whatever I get in the US.
    3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go).  We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging).  Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
    4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).  An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
    5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
    6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us.  Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t.  But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit.  I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted.  In any case, we are replacing it since it may be about 4 or 5 years old.
    7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL.  Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.”  I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise.  (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
    8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
    Connection Type: PPPoE
    Currently, the router is configured to use WPA-PSK security.
    Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
    (The following information may be unimportant at this time.)
    Broadband Link Diagnostics:
    DSL Synchronization: UP
    G.DMT Signal: UP
    PVC Connection: UP
    PPPoE Service: UP
    PPP Authentication: UP
    IP Connection: UP
    DNS Communication: UP
    9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
    http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
    10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models.  I will have to buy the new equipment in the US this year.  At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
    11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
    Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described?  That is, connecting the two with a cable and creating two WI-FI networks.
    12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755 
    13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
    14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)?  I have heard of the “repeater”, “roaming” , and “bridge” modes.
    15.  Are there two levels of passwords which need to be considered?  Of course, there is the network and network passwords which we create here and which will be different.  But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
    16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
    I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products.  So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.   Apple can rest assured that I will buy other things from them!
    In that case, I’d likely buy a second TP-Link device to create a second network:
    TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
    Thank you in advance. Long live Apple!
    Message was edited by: Jess1911

    I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
    I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
    In your case it should be whatever the IP of the 2wire is, followed by /mdc
    Give it a try.
    As you can see it shows vendor and loads of info about the line.
    I rate it the best domestic modem for line info.
    A good modem actually albeit a lousy router.
    MDC is the diagnostics and Management Console.
    3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go).  We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging).  Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
    You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
    That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
    4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). 
    Apple router is fine for this. Easy to configure out of the box.
    5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
    The problem arises when you try and interconnect using  wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
    11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
    Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described?  That is, connecting the two with a cable and creating two WI-FI networks.
    It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it. 
    12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
    Absolutely best.. only decent method. 
    14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)?  I have heard of the “repeater”, “roaming” , and “bridge” modes.
    Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
    15.  Are there two levels of passwords which need to be considered?  Of course, there is the network and network passwords which we create here and which will be different.  But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
    Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
    The passwords on the TC are for its Admin, wireless and disk access.
    16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
    For ADSL you must have the PPPoE authentication username and password.
    So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
    hmmm.. I am biased because I see the issues not all the good stories..
    The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
    I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
    In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
    See reviews here.
    http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
    That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
    I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
    Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
    Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
    One thing you do need to check.
    Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
    If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
    You cannot change it to Nepal.
    To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
    See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
    If only the whole world would just bow to America.. we could all follow the FCC regs..
    http://en.wikipedia.org/wiki/List_of_WLAN_channels
    This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
    Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

  • Airport is connected to router but no internet

    I have seen many forums and posts on this and nothing seems to help so i will explain my own situation and see if it helps.  I am using  white macbook, purchased from the apple store in september '07.  I am running os x 10.6.8.  The router i am using is a D Link DIR 615.  The line of connection is as follows: cable from wall to modem, modem to router, and devices connect to router via wireless.Here is my dillema.  Airport connects to the router, full bars,  i get internet conection for about 2 minutes, then i get nothing.  Airport is indicating that I am still connected to the router, and I have an IP (not the 167 or self assigned, it says im good to go).  For me to get back on the internet i have to turn off the airport, turn it back on and reconnect to the router.  I have tried to renew DHCP lease, i can when connection is good but after the 2 minutes i can't.  I tried taking the network off my keychain to where i would have to type in the password each time, that didn't do it.  I changed the password on the router, as well as other settings, that didn't do it.  The reason this puzzles me and make me believe that it is my own airport is because multiple machines in our household work fine on the router, including a macbook pro form either 09 or '10, an iPhone 3G S, and an android smart phone.  other people have come over and used our wireless with no problem.  My computer is the only one that does this.  And the shame of it is, I am a graphic designer and I use my computer the most in the houshold, and I need the internet connection the most.  if anyone has any idea, and I am completely open to giving more information if you need it.  I understand it could be extremely technical and it is already beyond my reach. 

    Hi Kelly Chant-
    Any chance that the little AirPort antenna in the back has become dislodged? Try powering down everything on the network including routers and/or switches, wait 10 minutes, turn it all back on and see what happens.
    Luck-
    -DP

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

  • How can I set up an Airport Extreme as a router, in conjunction with my AT&T modem/router?

    I am trying to set up an Airport Extreme as my router, and I am currently using an AT&T modem/router combo. I am wondering what would be the easiest way to do this. Any help would be appreciated. Thanks!

    Connect an Ethernet cable from one of the LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme. This cable must remain in place permanently.
    Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac
    Click on Other WiFi Devices
    Click on AirPort Extreme xxxxx
    The utility will take a moment to analyze the connection, then a screen similar to this will appear with your AirPort Extreme instead of an AirPort Express
    Type in a short simple name that you want to use for the wireless network
    Type in a device name for the AirPort Extreme
    Enter a password that will be used for both the AirPort Extreme and wireless network
    Verify the password
    Click Next
    The utility will setup everything for you. When the message of Setup Complete appears, click Done and close AirPort Utility.
    The AirPort Extreme wireless network is now available.

  • Do I use Airport as my main router or do I use it in addition to a router?

    So I am looking to improve my wireless signal in my house as well as find a better solution for Time Machine rather than using a portable HDD which I plug in now and again to backup.
    My question is this, Do I use an Airport to replace my router or do I use it in addition to my router?
    If it can be used in addition to could I place it say half way between my router and further point I would be from my main router so it doubles (Triples rather!) up as a wi-fi range booster?
    Summary of home setup: Main router in living room. In apartment with 3 main rooms. Playstation must be wired so router cannot move to a more central location but this means poor signal in bedroom for iPhones / Apple TV.
    Thanks!
    Ray

    There's nothing wrong with using a portable HDD to back up when it's convenient for you, and offer the advantage of being more easily transported than a Time Capsule. They're also inexpensive and disposable – features that enhance a comprehensive backup strategy. A Time Capsule is a fine product and I own several of them, but you can buy three 2 TB portable USB hard disk drives for the price of a single 2 TB TC.
    (Not that 2 TB is necessarily the best choice though - a smaller capacity may be more appropriate for your requirements.)
    Remember that portable Macs use "local snapshots" that are flushed to your Time Machine backup device when it becomes available. Plug it in when it's convenient for you. A Time Capsule is advantageous for those lacking the discipline to do that routinely.

  • I am connected through airport to a home router but none of my applicatons will connect to the internet. I have an old Macbook running OSX 10.5.8 and it has worked previously wthout any problems.

    I am having trouble connecting applications to the internet. Airport find and connectsme to our hom router network connection but mail and safari cannot connect to the internet. Previously the conection worke withou difficulty.

    You can be connected to a wireless network that has no internet connection. Try restarting your Airport device and your router.

  • Installing airport extreme after a router

    when connecting an airport extreme to a router (AE after the router), should the wire from the router go into the WAN or LAN port of the AE?

    It won't matter which port you use if you configure the AirPort Extreme in Bridge Mode, which is the correct setting when you have another router ahead of the AirPort Extreme.
    All the ports become LAN ports in Bridge Mode.
    AirPort Utility >  Manual Setup
    Internet icon > Interner Connection tab > Connection Sharing = Off (Bridge Mode)
    Be sure to restart the entire network after you change the Extreme to Bridge Mode.

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

  • Can I use The Airport Express as a router only. Need your help

    Hi there,
    I need to get some help from anyone for a good wireless router for a MacBook Pro. I want to know if anyone had a Airport Express as a router only of some help in this matter.
    Hope to get your feedback. Thanks
    From Samantha Kellar

    Can you explain a bit more?
    The Apple Express is a router. The new Apple Express has a LAN port so you can have a device on a wired connection.
    Are you talking about removing the modem and only having the Airport Express?

  • Cascade AirPort Extreme to Netgear Router

    I am trying to create two (2) separate networks within my home (Note: I do not want any communication between the networks), using two different routers; (1) an Airport Extreme (5th generation) and a Netgear Nighthawk (AC1900).
    I would like to connect the Netgear directly to the modem and then connect the LAN port of the Netgear router to the WAN port of the AirPort (LAN-WAN connection).  Since the routers have two different IP addressing systems, I assume I do not need to worry about static IP address or disabling the DHCP.
    Unfortunately, when I set it up, I am unable to get a connection on the Airport.  I tested the wired connection on the Netgear to assure there is a wired Internet connection and there is, but when I plug it into the Airport, I am unable to get the Airport to work.  If I reverse the set-up and connect the Airport directly to the router and then make a LAN to WAN connection from the Airport to the Netgear, I can get both routers to work, but for security reasons, I would rather have the Netgear directly connected to the modem and have the Airport be after the Netgear.  Any help in how to make this work or what I may be doing wrong would be greatly appreciate.
    Thanks

    I am trying to create two (2) separate networks within my home (Note: I do not want any communication between the networks), using two different routers; (1) an Airport Extreme (5th generation) and a Netgear Nighthawk (AC1900).
    I would like to connect the Netgear directly to the modem and then connect the LAN port of the Netgear router to the WAN port of the AirPort (LAN-WAN connection).  Since the routers have two different IP addressing systems, I assume I do not need to worry about static IP address or disabling the DHCP.
    Unfortunately, when I set it up, I am unable to get a connection on the Airport.  I tested the wired connection on the Netgear to assure there is a wired Internet connection and there is, but when I plug it into the Airport, I am unable to get the Airport to work.  If I reverse the set-up and connect the Airport directly to the router and then make a LAN to WAN connection from the Airport to the Netgear, I can get both routers to work, but for security reasons, I would rather have the Netgear directly connected to the modem and have the Airport be after the Netgear.  Any help in how to make this work or what I may be doing wrong would be greatly appreciate.
    Thanks

  • HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

    do you need to connect the airport express to a router via ethernet or can it do it using wireless?

    There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
    http://www.apple.com/compare-wifi-models/
    Do you have one of these products in the living room? 
    If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

  • Connect Airport Extreme to existing router without ethernet cable

    I am looking to connect my Airport Extreme to an existing router without the use of the ethernet cable.  The existing router is on the ground floor whilst I would like to install the Airport Extreme in the first floor to improve WiFi range on the 1st floor.  I am able to connect Airport Extreme to the router with the ethernet cable (in which case both the devices have to be close to one another on the ground floor) but unable to get Airport Extreme set up without the ethernet cable.  Is it possible to connect Airport Extreme to the existing router on a non-wired basis (i.e. without the ethernet cable) and if yes, how would be I able to do it.  Any help would be appreciated.

    The AirPort Extreme can connect wirelessly.....IF.....your existing router is also another Apple router.
    Is that the case here?  If yes, what model number is your existing Apple router?
    If no, you will need to continue to connect the AirPort Extreme using a wired Ethernet connection.

  • Airport express use as router.

    I have two airport express. the first  as base, the second as bridge. I want to use a wireless IP camera connected to internet and accessible from any other PC in the world by internet. Is it possible with my airport express or do i need a router.
    thanks for any help.

    You main base AirPort Express is a router if you have configured it as such.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the base AirPort Express icon,then click on Edit
    Click the Network tab at the top of the next window
    IF....the Router Mode setting is configured as DHCP and NAT, then the Express is functioning as a router. You will likely need to use the Port Mapping settings to configure the cameras.
    IF...the Router Mode is set to "Off (Bridge Mode)", then you have another device on the network....you likely call this your modem....that is providing the DHCP and NAT functions, so it is acting as the router for the network. You will need to configure Port Mapping or Port Forwarding on this device.

Maybe you are looking for

  • Itunes wont open june 22 2012

    Itunes wont open on my computer it says when i try to open it"This item reffered by this shortcut cannot be accessed.You may not have the approprite permissions." I have deleted Itunes and it still wonnt open after the last update. PLEASE HELP ME!!!!

  • Mac OS X 10.4 - Software RAID 10???

    Hello All... As a motion graphics artist by trade and a musician at night, I am constantly faced with the on-going dilemma of my storage needs. As you may probably already know, these two activities eat up drive space and require a speedy storage sol

  • Failed to upgrade more than one table at same time

    Hi In Deployment Manager, I failed to upgrade more than one table at same time. I tried to hightlight 4 tables and set the default action as Upgrade, and click File/Generate Deploy. It passed the code generation step then I click Deploy, they are all

  • Need to know my password

    This is a brand new Macpro. I ran the setup assistant correctly I believe. Now I wish to transfer files from my previous MacPro to this new one and I get asked to type in the "password". First I don't think I had put in a password other than my Apple

  • How do I get all of my favorites, transferred from IE11 to display when I select "favorites", instead of opening them as tabs?

    I have transferred them over but when I select them, only a partial list is displayed. I can open them all as tabs but that is not satisfactory to me. I could see them all with IE11.