Airport refuses to connect to wireless router... most of the time

I'm having a really odd problem with my MacBook Pro trying to connect to the internet via my wireless ZyXEL router. I've had the router for a while and use it to connect a Mac Pro and PC by LAN and a Wii and iPhone wirelessly and It's never given me a headache before.
Airport picks up the local WIFI networks, including mine, no problem. But when it tries to connect, after asking for the WEP Password, it just times out. I have tried creating the network connection manually within the "Network" area under "System Preferences" selecting various security methods (WEP Password, WEP 40/128-bit ASCII and None) but nothing works. And everytime I manually select the ZyXEL network it asks for the WEP password anyway. No matter how many times I put it in, it wont connect.
I also logged into the system preferences of the ZyXEL wireless router and input the MacBook Pro's MAC address and selected "allow access" but it still wont connect. Except just one time, when I simply turned Airport Off and On again it connected fine and didn't ask for the WEP Password?!? But then after I rebooted machine It won't connect again and turning Airport Off and On doesn't work anymore either.
Can anyone shed some light on the problem?
Thanks very much

You may have noticed that your issue is fairly common and no one single solution works. So all I can offer is a few things that I know have worked for me, my friends and colleagues, and my customers.
1) make sure your computer can connect wirelessly elsewhere. There's little worse than struggling with an issue at home only to discover it wasn't fixable.
2) make sure your base station's firmware is up to date
3) try turning off the security on your base temporarily and see if you can connect that way. If so, try a different security method.
4) try changing broadcast channels. You may have a neighbor on the same channel which blocks reception - I know, why this computer and not others? Voodoo
5) open your Network preference tab and select Airport. Delete any preferred networks you find and make sure that ask to join new networks is checked
6) create a new account and see if it has any better luck connecting. Last spring I struggled with a computer for several days and one of my IT students suggested this pointing out that I suggest it for many other troubleshooting issues. Darn smart aleck student! Obviously at some point the admin's network prefs got munged and everything I tried after that was for naught.
Good luck

Similar Messages

Airport refuses to connect to dlink router

When I try to connect to dlink (WBR-1310) network, Airport gives me a message "There was an error joining the AirPort network dlink" after I enter my password. I created my password with the help of a dlink technician and they have no clue why it would not work. If I do not password protect my network, it works, but I do not want to go unprotected. Any suggestion? Thanks much.
Yvan

danycom, Welcome to the discussion area!
When you say "Airport refuses to connect to dlink router", do you mean that you are trying to get an AirPort Express (AX) to connect wirelessly to the router? Or do you mean that you are trying to get your Mac to connect wirelessly to the router?

Airport Expr. Device not found. The AE does not connect to my MB Pro with OSX 10.8.5 for most of the time?

Hi,
yesterday i bought the new AE Basestation to stream my music wireless. Sometimes my Airport Programm can find my AE but most of the time not.
I connected the AE wireless to my WLAN Router, might there be a problem?
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Problem configuring Airport Express to AT&T wireless router

How do I connect my Airport Express to an existing AT&T wireless router to extend the range?

I was told by a Best Buy sales person that...
If only I had a nickel for every time I heard that.....
A long time ago Apple sent diplomatic mail to Best Buy informing them of this wrong information.... unfortunatley looks like Best Buy paid not much heed to it.
BTW, the reason Apple had to contact Best Buy on this, was because AppleCare was getting bogged down by clients calling wondering why their routers were faulty... since they could not extend third party routers.

Can I use airport express without connecting to a router?

I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

Unable to conect Original Airport Card to password protected wireless route

I am trying to connect a ClamShell notebook( OS 10.3.9) with an Apple Original Airport Card (installed) to a wireless router. When I access the network in System preferences, it detects the router and my Airport Card and indicates that a password is needed to access the that network. After inputting the password and with the location router highlighted, it does not connect me with the network as I go through the setup procedure. The system administrator successfully connected to the router with a PC laptop. Am I not selecting a topic that I should or have I not performed the set up procedure correctly? I did not have this problem when I connected to a non-password router.
Any help would be greatly appreciated,
Darrell

Never received a reply from Henry B. so I decided to experiment with my problem. I Inputted the password in the Setup assistant, highlighted the router location and clicked Continue to continue with the Assistant. The Airport icon in the top bar became more pronounced instead of faded. I did not receive confirmation of a connection, in fact the back up page button was the only button active. I closed out of the Setup Assistant. I brought a browser and found the browser was connected to the Internet.
MORAL: Don;t always believe the Setup Assistant

HP Officejet Pro 8000 Wireless: HP printer unable to connect to wireless router.

Installing new printer, getting error msg saying HP printer unable to connect to wireless router. MAC address filtering may be enabled on your wireless router which can prevent HP printer from connecting to your wireless network during setup.
SOLUTION says: If MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC addressof your printer to the list of permitted devices for your wireless router before continuing.
My router is WD My Net N900 Router. MAC filtering is diabled. My security mode is WPA/WPA2 Personal.
I have run out of ideas to try and fix the issues, would appreciate some help.
Thanks,

Hi Jamshidk
I am surprised you are getting that message and you checked the router settings and it is showing that the Mac Filtering is disabled.
I would suggest connecting the printer to the router with a ethernet cable to get a valid IP address and then setup the wireless.
Print a configuration report.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01554589&lc=en&product=3760410&tmp...
Type the IP address from the configuration page in the address bar into internet explorer browser. This will open the embedded web server for the printer. Click on the Networking tab, on the left hand side select wireless. After this is setup and applied, disconnect the ethernet cable.
Should be on the wireless network. Takes about 1 minute.
Run the add printer wizard.
Go to start, devices and printers and select add a printer. (Win 7)
Test the printer.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

Is it necessary to be connected to wireless router/ap to upgrade firmware of WRE54G V1.0 ?

Is it necessary to be connected to wireless router/access point to upgrade firmware of WRE54G V1.0 in order to support universal repeater mode ??? Please let me know with full details what should I do in order to upgrade the firmware but without stay connected (in range) of a signal of a wireless router ot an access point. Thanks.

neighbour_devil wrote:
Hey mike,
the static IP of 192.168.1.5 has to be assigned to one of the wireless PC's that you have....make sure that you assign the static IP to the "wireless network connection" . once you have done so....check if you are able to see the SSID of the WER54G..connect to that SSID...and then try to ping 192.168.1.240 from the command prompt...if you get replies...then try to upgrade the firmware.
Can someone walk me through the steps of assigning the static IP to the "wireless network connection" referred to in the last post? I would assume you would right click on My Network Places, then right click on the "wireless network connection", but give me the steps after that. I don't want to screw anything up. Also, is it necessary to turn the router off, or can I just temporarily disable the connection on my laptop?
Thanks,
~MaxMessage Edited by maxrich on 08-18-2006 06:30 AM

Anyone used Airport Express as bridge w. wireless router other than Apples?

I have my QS 867 hardwired to my highspeed modem and a Netgear 624GT wireless router attached. My PB has been having trouble with the signal in certain spots due to all the jazz about the alum interfering w. the antenna. When I try to setup the Airport Express with my Netgear network and use the Airport as a bridge/range extender, it does not recogize the Netgear router. It seems to specify in the instructions that you MUST use an Airport Extreme Base Station. Is this true? Has anyone used the Express as a bridge with a wireless router other than the Base Station?

At one point in time I did have an Airport Express working in WDS over WEP with the Belkin F5D7230-4 and F5D7130. It's unsupported and difficult to get setup. It tends to causes them to lock up and need to be rebooted.
We ended up just dropping the Belkins and getting more Airport Expresses as the Belkins couldn't support doing WDS over WPA (which we've since moved too).

My Ipad and itouch cannot be connected ti wireless router tried changing setting still cannot connect

my Ipad and itouch cannot be connected ti wireless router tried changing setting still cannot connect

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Airport Extreme wont connect too my router

Airport extreme dosent connect to my router via my ethernet cable, i just get a orange flashing light. Do i need to configure my router?

The ulitity program need to be updated after downloading its all sweet now. I just have too FAT 32 my External HDD and it will be fully operational

Airport refuses to connect to wireless router... most of the time

Similar Messages

Maybe you are looking for