Airport remaining connected but unable to load pages

I've been using my MB for four years now and this problem has recently appeared over the last two days. The airport icon will show full bars but I will have no connection to the internet. If I power cycle the airport (menu turn off then back on) I can then continue to browse the web. This happens about every five minutes or so.
I do have other computers in my house that aren't having this problem. So I know it's something to do with my Macbook. I was going to do a reformat/reinstall but I wanted to see if there was a known solution here. It's almost as if the DNS service just stops working and needs to be reset...
Any solutions? Purchase a new card? Reinstall OS?
Thanks!

Hi!
I am experiencing the same problem! And by the looks of it some other users are too!
My Macbook is one and a half years old and I never had problems with using WiFi. I am currently using BT wireless and during the day it keeps dropping now and then.. I end up restarting the machine as the status icon shows that its fully connected with my chosen connection but internet doesn't work. After restarting several times and deleting all joined wireless connections history, it eventually works. I am getting annoyed by this now. Also, as said by the douglobue rest of the machines are working fine on wireless its only my macbook. Any help please?
Thanks in advance!

Similar Messages

Airport connection is strong but unable to load pages

On my Macbook all of a sudden now it says it is connected but web pages won't load at all I have tried to restart and turn on and off the airport, and nothing. Tried with Safari Chrome and Firefox. Tks

Are other Internet services available, such as email? Are other computers on your network able to get on the web?

Internet connected but unable to load web pages

Hi - My computer is an Imac, late 2006 model. For some reason I seem to be having problems connecting to the internet using the Airport connection. Using the Ethernet cable everything is fine no problems whatsoever, but wireless connection just doesn't happen. I have run through all the relevant diagnostics and checked the wireless router modem settings. My wife recently bought a MacBook - it connects wirelessly without a hitch. I even changed the iMac setting to exactly the same as the MacBook, but still nothing. I get the green lights in the Network Diagnostics screen, but when I try to load a page in Safari I just get an error message " Not connected to the Internet, or Server failed to respond".
My broadband ISP is Virgin Media (not a cable connection - it's ADSL) and the wireless router modem is a Netgear DG834GSP v3.
Any ideas anyone as am getting really frustrated at not being able to connect wirelessly.
Thanks in advance.

Hi I have been having exactly the same problem for the last couple of weeks, and can't explain what is happening either. The Mac seems to be connected to the Internet with all of the status 'lights' in Network diagnostics green. I am picking up an IP address but can't load any Web pages. Very puzzling !

Orange USB Modem with "Mobile Partner" connects but won't load pages

All,
I talked Orange Telecom into giving me a free trial with one of their USB modems. I plugged the modem into my MB Pro, installed the "Mobile Partner" software and configured the connection settings as specified by the Tech. I am able to connect fine using the device, however, it will not allow me to receive data, so I am unable to load web pages. The connection says that I am sending data, but not receiving anything. Any ideas on what I need to do in order to successfully receive data?
Current Settings are as follows:
Connection: Orange
APN: orange.ug
Phone Number: *99#
user: orange
password: orange
with these settings I am able to connect fine, but no data is received. I am guessing this has something to do with a setting in Network Preferences, but I can't figure out why it's not working. Any help would be appreciated.
Thanks,
Joe

Hi Sig - thanks for the reply. Unfortunately, I was sitting with the Tech rep when we configured the settings, so we are both sure the phone number was right. Additionally, I am connecting and I can see that information is being "sent," however the problem is that no information is being "received" so I am unable to load web pages, etc.
It must be some sort of problem with the network settings in Mac OS because there does not appear to be any problem connecting to the service, the problem has been receiving information. Any other suggestions or help would be appreciated.
Thanks,
JB

AirPort fully Connected but Safari not loading

My airport shows i'm picking up full bars from my wireless router. But when i run safari it shows that i'm not connected to the server. I have a magicjack connected to my macbook and thats running fine.. fyi internet is needed to run this. Also on my itunes i can access the itunes store which also needs internet access. So i can get internet but accessing it thru safari it doesnt pick it up. I can access internet thru safari when i have my ethernet cable connect but not wirelessly.... HELP... PLEASE.. i'm about to loose my mind... I dont like being stationary!!!!!! Any advise is welcome..

HI,
Try installing the v10.6.3 Combo Update
Then repair disk permissions.
aunch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

After 2.0 update, WiFi still connects, but won't load pages or any internet

So I had just used the IPod touch to hit some web pages, look at weather, stocks, youtube etc... an hour later....
installed the 2.0 update with the New York Times app, now I still connect to my access point, renewing IPs still work, It IS connected to the AP, but Internet based apps time out.
Example error: Safari could not open the page because the server stopped responding.
I have rebooted, restarted, restored, and all the other things I've seen mentioned, but still can't get internet traffic. At one point I even tried connecting to the AP management, was prompted for ID and password, but then blank page.
any help appreciated

Exactly the same here. Just noticed this in my local coffee shop (Neros) where I used to be able to log on to BT Openzone. Now, since updating to 2.0 version, I get the same error message as you i.e. I can find and attach to the WiFi host but cannot get any further than "Safari can't open the page because it is not connected to the internet" Tried re-booting to no avail. My WiFi works just fine at home, though. Really annoying. Any ideas ?

Airport card connected but safari not connected to internet

Running os 10.4.1 on IMAC g5 with airport card.
i am having some wireless network issues. when i try to connect to the linksys router that my airport card locates it tells me that i am connected to the network; but when i try to load a page in Safari it tells me that i am not connected to the internet. Internet Explorer gives me the same message.
i have been able to test my airport card by logging into another (neighbor's) network (just for testing). it received DHCP from that router and assigned a 198.162.x.x. IP address for my computer. i originally had the same issue as far as being connected but safari wouldnt open web pages. i manually plugged in DNS numbers 208.67.222.222 and 208.67.220.220 from OPEN DNS.com and Safari instantly loaded web pages.
when i try to do the same on the linksys network my airport card connects but Safari once again will not connect to the internet. I am receiving a DHCP IP address automatically from that router but cannot connect to the internet...
PLEASE HELP ME (it's driving me crazy!)

Oh man... since my last post (all of 15 minutes ago) my iMac now cannot connect to the network at all. The network status menu widget shows it as being connected (sometimes), but it can't actually connect to anything.
Just as an experiment, I turned off MAC address filtering on the base station. Didn't help.

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Luakit and magnet links - "Unable to load page"

Hi,
I've got luakit with working magnet links handling, but there's one annoying issue. Everytime I open magnet link luakit opens transmission and goes to "Unable to load page" page. Is there any chance to disable this behaviour? It also spawns new tab to execute transmission. It would be nice to make it "more in the background".
webview.init_funcs.magnet_hook = function (view, w)
view:add_signal("navigation-request", function (v, uri)
if string.match(uri, "^magnet:") then
local cmd = string.format("%s %q", "transmission-gtk", uri)
luakit.spawn(cmd)
return false
end
end)
end
Thanks in advance.

Also try changing your code to the following and it'll open magnet links and mailto links using xdg-open. * Note I haven't really tested this, as I have been modifying the webview.lua file.
webview.init_funcs.navigation_request_decision = function (view, w)
view:add_signal("navigation-request", function (v, uri)
if string.match(string.lower(uri), "^magnet:") then
luakit.spawn(string.format("%s %q", "xdg-open", uri))
return false
elseif string.match(string.lower(uri), "^mailto:") then
luakit.spawn(string.format("%s %q", "xdg-open", uri))
return false
end
end)
end
Edit: Any queries about luakit should probably be directed to its main thread in Community Contributions. The project isn't particularly active but occasionally the devs check there.
Last edited by zoqaeski (2014-06-03 17:00:44)

E62 though connected but unable to get browsing

I got Nokia E62.
I have connected this phone through USB Cable with Modem.
All got successfully done and connected but unable to browse on phone.
Is there any setting to be done on phone to get start browsing?
Can anyone try to send suggetion?
Attachments:
E62-3.JPG ‏99 KB
E62-1.jpg ‏147 KB

Hi there.
Some hotel networks require some sort of authentication, or sometimes even payment to connect to the network. If you are connected to the wireless network, and the network requires this, you should be greeted with a page as every time that you attempt to connect to a wireless network, the iPad checks for this.
I would also try contacting the hotel's network troubleshooting department for help also, as they may have a different configuration than normal networks do.
Hope this helps.

My ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps

my ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Unable to load pages after update to 3.6.8

unable to load pages with any browser after update to 3.6.8
windows update only online function that works

try this
download and run norton removal tool. this woked for me
http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US

I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???

OS is Windows7. I'm using the latest version of Mozilla Firefox
I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

Airport remaining connected but unable to load pages

Similar Messages

Maybe you are looking for