Airport Reports Wrong Information - Internet Connection

Hey,
I've got a very strange problem, I'm not quite sure what to make of it.
First off, my setup is as follows:
-> : Ethernet ~> : Wireless
Cable Modem ->
Airport Extreme (Simultaneous Dual-Band) ->
Airport Extreme (" ") ~>
Airport Extreme 802.11n
The problem I'm having, is that the second airport in the chain is reporting no internet. However, the last airport on the chain is green and getting internet. I'm working off the network right now. I've tried restarting everything, but that does not fix anything.
I'm not sure why it's reporting no internet in Airport Utility. It's very strange.
Any advice would be appreciated. \

First thing to check would be whether you have the second and third AirPort Extremes set up in Bridge Mode.
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Off (Bridge Mode)
Next, if the second and third Extremes are set up to provide wireless, check to see that they are set to "create a wireless network"
AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network

Similar Messages

HT1218 Airport Time Capsule losing internet connection after 3 hours

I just got a Time Capsule and my internet connection seems to time out after 3 hours or so. My macbook/iphones/ipad seem to still connect to the internet but there is no internet connection. The only fix seems to be unplugging the modem every 3 hours. I think I have the most updated systems on everything. Does anyone know what I need to do?

Hi there Tharv23,
You may want to reset your base station to factory settings as an inital troubleshooting step. Take a look at the article below for more information.
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
-Griff W.

Wep password rejected - Airport works but no internet connection

With my iMac i'am connected to internet via my Sitecom router WL143 and WEP 128bits hex password. My new MacBook won't accept the WEP password. Still get a warning that the password is wrong. My MacBook can see all routers in the neighberhood. Have ones tried at a familymember, internet connection works perfect (not Sitecom).
Is my type of router the problem? Do i had to buy an other brand?
Who can help. Thanks in advance.

Open System Preferences->Network and find your connection named "Airport". In the right column hit the "Advanced" button in the bottom right hand corner. In the drop-down select "DNS" and put either OpenDNS.com (208.67.222.222 & 208.67.220.220) or Google DNS (8.8.8.8 & 8.8.4.4) in the DNS settings and hit apply. See if one of those helps and you can tell this by opening /Applications/Utilities/NetWork Utility and see if you can ping apple or Google by the DNS (www) name with it. This way you can see if the it works.

Can I use a airport express to get internet connection to a Mac Mini that doesn't have wireless by adding it to my existing wireless network?

I bought a first gen Mac Mini for our daughter and it doesn't have internal airport adapter and was wondering if I got a airport express can I plug it in my daughters room and use it as a local router and just use the eithernet connect from it. Or would a airport extreme work better for this job. I have a wireless cable modem that we connect to. I also have a second question I have a iMac G4 that picks up the wireless signal but will not connect to it does it have to be a Apple airport for it to work or should it be able to connect to any broadcasted signal. Thanks for the help.

I'm not sure I quite understand. Do you wish to use the AEX to provide a wireless connection for a device that has an Ethernet port but no wireless capability of its own? You wish to use it in place of a wireless card that isn't internally installed? If so, the answer is, "Yes." It will work as a wireless access point. But you must have an extant wireless network because the AEX won't have an Internet connection when used in this way.
If you have an existing wireless network with a wireless router connected to your cable/DSL model or your modem is a wireless router as well, then the AEX may connect to it in bridge mode. Note that AEXs don't always play nice with non-Apple routers. Some work; others don't.

HT201335 Can i use airplay with the apple tv and airport express without an internet connection? Basically Set it up as a closed network?

I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
No internet connection is available at the location.
Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
I know I can do this wired with the HDMI adapter but would like to do it wireless.
Thanks for any help!

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

Airport Extreme slowing down internet connection to a crawl

Hi,
Can anyone explain this one?
Just this afternoon my internet connection slowed to a crawl. Pages would stall loading and I couldn't even collect emails. There was a connection there. A Google search might take a minute or so but anything else would barely flinch.
So I did a few restarts and complete power downs of all my peripherals, computers and network devices but no joy. I called my broadband provider who did a remote test of my cable modem and confirmed it was responding well.
So I removed the Airport Extreme from the network and connected directly to the modem. All was fine, in fact that is how I am working now. But when connecting the Airport Extreme back in I have this extremely slow connection. I have looked at both the Network preferences and Airport Setup Utility. Both claim the connection is good.
I also have an old G4 in another room. It was switched off during all the goings on this afternoon but I powered it up to see if the same problem persisted. Sure enough it does, as it is also connected via the AE. However, the local connection between computers is just fine.
So how do I resolve this? Why would the AE cause such an internet slowdown?
Thanks,
Colin

I've had similar symptoms on my network. Here are network details:
Comcast is the ISP
I have an Extreme and an Express set up as a single wireless network.
Extreme is plugged in to the cable modem. Express is an extension of the Extreme.
Devices that are regularly "on network": Mac Mini (G4), MacBook, Mac Pro, 2 TiVO Series 2.
All Macs are running 10.4.10.
Symptom: Over the course of 3-6 weeks, wireless access slows to a crawl for the Intel-based MacBook and MacPro, but not the PowerPC Mini. All web sites, email traffic, etc., for the Intel Macs becomes painful: CNN's home page loads in minutes, not seconds, for example. Unplugging and replugging the Express doesn't do anything. Powering off and on the Extreme resolves the issue. For now. There are no pending firmware updates for the Express or Extreme that I'm aware of.

Airport Express disconnects wired internet connection when attempting to extend Airport Extreme WiFi network

I just purchased and airport express to extend my wifi network. My base station is an airport extreme, I have one wired connection and a wifi network. When I go through the recommended steps to set up the express and "extend the network", the airport extreme will no longer connect to the internet via ethernet. I have tried various settings and can't seem to resolve the problem. Any assistance would be much appreciated.

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

How do I connect my airport Express to the internet connection of my Macbook Pro without an ethernet cable?

I would like to use my Airport Express (802.11n) to provide audio in another room for a pair of powered speakers, however the iTunes remote software for Android requires (for some dumb reason) an internet connection so I can't control iTunes
So my computer is connected to a cabelmodem via ethernet and the Express has established a network connection with the computer
How do i give the Airport internet access without an ethernet cable?

To share your Internet connection from your laptop, select 'Sharing' in 'System Preferences' and enable 'Internet Sharing'.
http://support.apple.com/kb/PH13855
You will need to set a WEP key. You may need to root the system do some things at the command line. I recommend against that.
Laptops don't work well as routers but it is possible.
Hook up the AirPort express to the laptop using an Ethernet cable and configure with the AirPort utility as if you are setting up a print server or base station. The Android should see the AirPort Express after that.
http://support.apple.com/kb/ht4587
https://discussions.apple.com/thread/2312443
This might work better if you used the AirPort Express as a base station instead of trying to use the laptop as a base station. Then your Android would have Internet access.

Time Capsule + Airport Extreme very slow internet connection

first time post here, looking for some help.
I have a small wireless network at home which runs as follows.
Modem - time capsule (acting as wireless router to macbook pro) - ethernet connection to iMac
I would like to extend the range of the wireless network as we dont get signal upstairs. To do this I have added an airport extreme to extend the signal (as someone gave me one for christmas!).
The network works fine, signal is great all over the house however internet traffic is very very slow when devices are connected to just the extreme station (ie when out of range from the time capsule).
Does anyone have any suggestions as to why my internet connection upstairs is very very slow?

Thanks for the reply. It seems to have helped a little - should I expect slower speeds from the extended network?

Airport network and sharing Internet connection

Hello all,
I have hit this problem with sharing an internet connection on an airport network. Maybe its a simple fix, maybe it a "can not be done", answer.
My set up may be a little hard to describe. To explain, completely wireless set up in my network, 1 x imac and 1 x powerbook, all on airport and using an airport express. This includes my new printer. All connected through airport express network, call it network A.
Up till now i had a modem with an ether net cable plugged into the airport express. All was fine.
I am in jakarta, the cable internet providers here are hopeless, slow connection speed.
Last month a new wireless internet service was released. Called 3.5 G. Its lightning fast and reliable. Basically you get a wireless USB modem attach it to your computer and you are always connected to the internet wirelessly. You can travel anywhere with it. The 3.5G is primarily for mobile phones but i use it just for internet. This modem is connected to my powerbook and works great.
Now, the useless cable internet connected to my airport express is still connected for my Imac to use.
My problem is that i would like to share my high speed internet connection from my laptop to my imac. Problem is that when i allow sharing from my laptop, the intenet works fine on both machines but on the powerbook, which is doing the sharing you get an arrow symbol through the airport icon at the top.
The laptop can NOT access the local airport express network A. Hence i cannot use the printer or see the imac. That is my problem, i cannot print from the powerbook unless i stop sharing. When you share an internet connection the sharing computer seems to create another computer to computer network and does not join the existing arirport network.
This is probably a little confusing. Hopefully, someone may have some ideas. My alternative is to buy a new fixed position modem/router for the 3.5G system. Its about $600. Ouch.
Any ideas
thanks for the interest.
joe

Selamat Phil Smith,
Actually do we know each other, cause i know a phil smith.
Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
Cheers and thanks for the idea
joe

Printing with Airport Express without an internet connection?

I have a printer which I would like to print from my MacBook Air wirelessly.
I don't have any network connections neither a internet connection since I use a wireless broadband card.
So my question is, do I need to have a internet connection for the airport express or can I just use it as a wireless to print.
Thank in advance.

Though you don't need an internet connection (which technically you have with your broadband card), I have read of an issue with connecting to more than one network (i.e. AirPort Express and your wireless broadband). If there is an issue, then it is possible you will have to switch to the Express for printing and back to your wireless broadband when your are not.

AirPort Express for iPhone Internet connection

I recently had cable installed in our shop for phone and Internet usage. We haven’t yet purchased a computer for the location, but I do have an AirPort Express that I purchased for use in my home (but have not set up at home yet). I also have an iPhone. Is there a way to use the AirPort Express with the cable Internet connection in our shop so that I can go online with my iPhone? (just FYI, I cannot connect with the internet at our shop with my iPhone over the AT&T network as there is no signal available in the area).
Thanks!

Well, I don’t seem to be getting too far with this set up at home. I’ve tried plugging my cable modem at home into the AX, then opened Airport Utility on my iMac, but all it says is “Airport Utility was unable to find any Apple wireless devices”. I’ve tried unplugging and re-plugging in the AX to the electric power. Also tried the reset button on the AX.
I then tried turning on WiFi on my iPhone and the AX shows up as “Apple Network” followed by the AirPort ID number. I then plugged the ethernet plug from my cable modem back into the AX and I can connect with my iPhone via WiFi to my cable modem and go online. No set up at all, which is what I wanted to do in the first place, except when I tried this with the new modem in the shop, the iPhone “sees” and selects the AX, but there is no connection to the internet.
So now I’m stuck with two dilemmas. I can’t get my iMac at home to “see” the AX, and I can’t get the AX to connect to the Internet with the modem at the shop. ???
Oh, and the modem in the shop is a "Scientific Atlanta 2203" and is for both cable telephone connection and RR cable Internet connection.

Airport time capsule losing Internet connection?

My airport time capsule is losing Internet connection but I still have wifi? Any suggestions?

It could be your modem, or other problem on the ISP's end. Try resetting your modem - power it down and let it rest for a few minutes, then power it back up again.
If it is a cable modem, also disconnect its coaxial cable - literally unscrew it and leave it detached while the modem is powered down.
Leave the TC powered up during that time.
After a sufficient amount of time has elapsed reconnect the cable and power up the cable modem. If you're still having trouble contact your ISP.
The possibility of a TC problem exists but the sort of failure you describe is not common. If all else fails perform a "hard reset" followed by reconfiguring the TC. Your Time Machine backups will not be affected.

Can Airport Express share an Internet connection via Thunderbolt Ethernet

An increasing number of hotels are now charging for every device that you use to connect to the Internet. I am travelling to India next week for work and the hotel I am staying at has this policy. I have not discovered a way of sharing a Wifi account between several devices. I travel with an iPhone, iPad and MacBook Air.
What if I connect my MacBook Air via wireless. Can I share my Internet connection (Internet Sharing in Sharing) by connecting an Airport Express to the ethernet port (thuderbolt ethernet) and create a wireless network that way? If possible, what configuration would I need on the AEX, wold it be bridge mode?

This is why I travel with 2 AirPort Express devices.
For hotels with wireless only....one Express is configured to "join" the hotel wireless network and it provides an Ethernet signal to the second Express which is configured to "create" a wireless network for multiple devices.
The hotel network only "sees" one device....the AirPort Express that is joining....so I'm only charged for one device, but can connect multiple devices if I want.
If the hotel has an Ethernet jack, you only need one Express..the one configured to 'create" a wireless network. Again, the hotel only "sees" one device....because I do not use Bridge Mode.....but I can connect as many wireless devices as I want.
Both methods work about 95% of the time at "unknown" hotels. Generally, I stay at "known" hotels where I know that things will work.

Airport Express knocks out internet connection in bridge mode

I have an Airport Extremem (one of the first 'N' versions) and an older (also 'N') Airport Express that extends my network in bridge mode. I want to add another Airport Express (also an older 'N' version) in bridge mode. The new one can be connected in client mode successfully, but when I try to connect it in bridge mode I lose my internet connection. Both of the Airport Expresses are the older model that hang directly on the power outlet and everything has the latest firmware version. Any ideas?
Thanks!

The new one can be connected in client mode successfully, but when I try to connect it in bridge mode I lose my internet connection.
Client mode is also Bridge Mode, so I am not sure what you are referring to here.
In other words, when the Express is in the "join" mode, that is client mode which is also Bridge Mode.
When the Express is in "extend" mode, it is also in Bridge Mode.
So, the AirPort Extreme is operating correctly, correct?
If yes, does the first AirPort Express extend the network wirelessly, or is it connected to the AirPort Extreme using a wired Ethernet connection?
Once we understand the relationship between the AirPort Extreme and AirPort Express, we can tackle the issue of your second AirPort Express.
BTW, the second Express cannot extend the signal from the first Express wirelessly, if that is what you are asking about here?

Airport Reports Wrong Information - Internet Connection

Similar Messages

Maybe you are looking for