Airport simply not working :( PLEASE HELP!!
I have macbook OS X 10.5.6, and recently acquired an airport (4.1) from my grandmother, who has a slightly earlier version of the macbook.
I decided i want to try to use it to print. I plug it in and it comes up in my network as 'sue's airport'(it was my g-mas) but the light is yellow and won't give me internet access. I don't mind though, because i already have wifi.
but i would like to use it to print. I've plugged it in to the outlet and the printer's USB. i tried printing bu it didn't work.I tried going to airport utility and it scanned but said it couldn't find an airport. mind you i was like 2 feet away from it.
So i put in the CD to try and install it, but during the installation, during 'destination select' this came up: 'You cannot install AirPort 4.1 on this volume. Your AirPort software is currently up to date.' i have enuugh room, and can't figure out why it won't let me install!
please help!
AND THEN si tried restarting it and it came up in airport utility. Everything was going great, i named it and configured it with my wireless network. But then after it said the update was complete, it was lost again I can't even find it in my wireless networks dropdown, where it was before
You could probably go through about a dozen different settings to find out which one is preventing communication, or you could simply perform a "hard reset" and start from scratch:
http://support.apple.com/kb/HT1406
If you do the reset properly (hold the reset button in until the LED flashes rapidly - about five seconds) and it will appear as "Apple Network xxxxxx" in Airport Utility.
After that launch Airport Utility, select your Express and configure it using the "Continue" button. Answer the few questions and you'll be all set.
Similar Messages
-
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
Maybe you are looking for
-
Non-stockable items - Error of G/L Account - ( Error No - ME45 )
Hi MM Experts, While creating PO for Non-stockable items I am getting one error which says that - " You can not enter G/L account directly for the controllling area/ Co. Code". Can u pls. help on this issue.. Thanks & Regards, Mahesh
-
Need help to count number of rows and display in file
Hello, my scenario is IDOC to File......i am using XSLT mapping and using FCC parameters to convert the flat file. now new requirement is i need to count number of rows and add count value last of the file. Please let me know how to do it, thanks in
-
I have a project that is approximately 1 hour in length. This is the first project I am attempting to burn. I assigned a theme to the project and then proceeded to burn a DVD. Before the burn could actually start, PE crashed with a "blue screen" d
-
Hi All In SAP Plant Maintenance we are using CATS . So business wants to know which data entry profile the user has used while entering the time for the work order. So is there any satndard report or table from where I can find out which data entry p
-
Finding value in one table based on date = maximum date in another
I have an event table that shows event dates and attendees but a customer now wants to see the titles of attendees at the time of the event. I have an audit table that shows changes in title and the dates on which the change occurred however I am no