Airport Speed issues after update

Hi, initially my machine was buggy after the update which never happens. I reinstalled from the Apple Site,instead of the software update, and the machine is running a little better. However, my Airport connection speed, using a Time Capsule running off my cable modem,is really slow. Ran permissions, Cocktail, still, not much better. Anyone having these issues and has a fix?
Thanks,
M

Matthew Jackson wrote:
Hi, I changed channels and that seemed to help a lot. How do you reset Airport Drivers?
Thanks for your input.
Well quit using the Airport card before trying this!
In the web link I posted earlier (How I fixed my dropping wireless Airport connection problem in Snow Leopard they explain the reset step in thye line:
"* Trash your home directories SystemConfiguration folder and reboot – Remove all files within ~/Library/Preferences/SystemConfiguration/ and reboot your machine. Make sure you delete the proper folder, this is in your home directory"
Then immediately reboot to rebuild those files. Then after the reset re-join you wireless network through System Preferences->Network pane.

Similar Messages

Airport/Linksys issues after update

I have a G5 2.0 PPC that will not connect to my linksys WAP- it had been fine for the last year, without a hickup. I downloaded the latest update about a week ago, and now all I get is there was a problem joining the linksys network. This became an issue immediatly after the update. My wife's iBook had not downloaded the update and is fine, as well as Dell laptop. Is there a way to un-install the last update?

anybody? Am I on my own?

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

MacBook Airport Issues After Update

Hello. After performing the most recent Software Update, my wireless Airport in my MacBook has been acting erratically. I never had these problems with it before the update and I know it's not the router because other wireless notebooks don't have the problem.
ISSUE: Airport often begins scanning in the middle of an online session without any reason. It then interrupts the session causing a hang while trying to visit other web addresses. It's as if it lost signal and began scanning again. Yet, my signal is always full. Before the update, I NEVER lost signal and never experienced any interruptions. I have verified and repaired all disk permissions. I have reset the router to no avail. Has this happened to anyone else? Does anyone have an idea what can be done?
Thank you.

Same problem! I hope there is someone here who can help us? After updating the recent "firmware" from apple, I've been having connection issues. It's strange...I get a full signal from my airport, but when I scan to find it in Airport Utility it cannot be found. My wife has another Macbook same os, but did not update the "firmware"....guess what?...all fine with her connection to airport. So, I'd have to say it might be an update issue....you think? What can I do? God, someone help....

Lion - TM issues after update

After updating to LION My timemachine started to give me huge issues.
i tried all possible solutions but my TM on Lion does not want create a backup. It has in a week backed up everything but it wont creata a usable sparsebundle . It keeps on ejecting the disk. After clearing the V100 index file seems going better but it still does not create a usable file. The repair disk did not show any issues . going pretty much insane.
I was able to use an external with USB without issues. But the NAS Synology DS207+ running their latest firmware on it that is supposed to work with Lion over LAN is creating the problem.
Tried wirelessy , same issue.
My Network has Airport express extreme. the macbook is connected though directly to the router via LAN while the NAS to Airport via LAN. this setup worked before on Snow leopard.
Couple of TMbuddy codes lines:
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-75305038)
100.0 MB required (including padding), 519.35 GB available
Waiting for index to be ready (101)
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “objects.xib” couldn’t be opened." UserInfo=0x7fbd3adbfa70 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSUnderlyingError=0x7fbd3c1245c0 "The operation couldn’t be completed. Input/output error"}
Stopping backup.
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “keyedobjects.nib” couldn’t be opened." UserInfo=0x1096ddfa0 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSUnderlyingError=0x1096c7fa0 "The operation couldn’t be completed. Input/output error"}
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /Applications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib/object s.xib to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/0D01FF21-79B2-4A6F-BBC8-58EAA4FF5ECD/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 90669 files (34 KB) from volume Enrico.
Error wri
Starting standard backup
Network destination already mounted at: /Volumes/Macbook Backup Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb3df60 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb45670 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb490e0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-3853366630)
100.0 MB required (including padding), 496.41 GB available
Waiting for index to be ready (101)
Stopping backup.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /System/Library/Frameworks/Accelerate.framework/Accelerate to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/E6213496-605C-48CB-AFB9-60C935297EEB/Enrico/Sy stem/Library/Frameworks/Accelerate.framework
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 86208 files (1003.7 MB) from volume Enrico.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copy stage failed with error:28
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Backup failed with error: 26
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: -153; status: -35; dissenting pid: -1)
Error i get:
Time Machine couldn’t complete the backup due to a network problem.
Make sure your computer and the backup disk are on the same network, and that the backup disk is turned on. Then try again to back up.

I am sure that there are other users that have had problems since updating the iOS. Have you totally reset the iPad up as a new device - not from a backup - and you are still having the issues?
If you have done so, have you tried closing all apps? Then when you start using apps - if the iPad works OK up until you launch a certain app - it may be that particular app is cursing the issue. And BTW, have you updated all of your apps since you updated the iOS?
Closing all apps .....
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

IMac 27" wifi issue after update to OS X 10.7.4

Hi all,
i can't access to wifi after update to OS X 10.7.4.
Anybody has remedy to this problem?
Is this software or hardware related problem?
Hope to get a reply soon.
Thanks.

Hi Thomas, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

Logic Remote issues after updating to iOS 8, problem solved!

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Note: Removing the CS (Controller Surface) plist is a part of the basic troubleshooting procedures for Logic Pro (and GB)
See section #8
Logic Pro X: Troubleshooting basics

"No Service" issue after updating iOS 8.1

My iPhone 5 is really giving trouble after updating all iOS 8.01, iOS 8.02 & iOS 8.1. Cellular network is come to halt, "No Service" issue is regular and i am not able to use my iPhone 5 as phone.
Please help me out else i have to switch to some other phone.

I have similar problem but with a 6:   bought new iPhone 6 four days ago, phone and 3G signal were fine in UK from Sat to Mon.   Yesterday, I traveled to Belgium and have had 'no service' problem since.   I am carrying a Nokia feature phone which is locked on to local network and working fine.
If I power off the iPhone and power on, it comes back and joins the network.   Five or so minutes later, it has dropped the network and will not re-attach if I put in/out of flight mode; needs power reset, and then drops again.
It is conceivable that this is a carrier issue but given that Nokia is fine and all the postings that I'm finding on various discussion sites, then I feel that it is an iOS issue.   I'm booked in to visit the Apple Store at the weekend.   My previous iPhone 4S was running iOS 7 and had no such problems.
So, carrying an expensive brick at the moment and hoping for an iOS update that will resolve this.

MacBook Pro issues after updating to iOS8

After updating to iOS8 I ran into some strange issues (listed below) for the first time ever. Some of them I noticed the next day, others a couple of days later...
- all my contacts disappeared in "contacts"
- all my contacts disappeared in "Skype"
- my background picture disappeared
- all my folders in the launchpad were unpacked and all the summarized apps were scattered all over the launchpad.
All those things happened while the computer was in sleep mode, not turned off and didn't return to normal after restarts.
I got everything restored/reorganized but keep wondering if somebody else experienced something similar.
Thanks for your help.

Well, if your Contacts have disappeared, then under System Preferences, click on iCloud and make sure you are signed into iCloud. If you are not, sign in. If you are, sign out and then back in to see if that restores your contacts.
I take it you have already restarted your Mac? If not, do that as well.
Best of luck,
GB

Airport Speed issues after update

Similar Messages

Maybe you are looking for