Airport time capsule ipv6 relaisfehler

bekomme seit einiger zeit folgende fehlermeldung bei meiner airport time capsule angezeigt:
status: ipv6-relaisfehler
und weiter heißt es:
"beim ipv6-relais-router ist ein Fehler aufgetreten. warten sie, bis der dienst wieder hergestellt ist, und wenden sie sich an ihren Internetanbieter, falls das problem weiter besteht."
benutze die airport time capsule auch als wlan-router für das internet.
wer kann mir bzgl. der fehlermeldung helfen bzw. was muss ich tun? ein neustart der time capsule hat wiederholte male nichts gebracht.
vielen dank im voraus.
unsermichel

Factory reset the TC and start over.
If you simply tried to change settings without the factory reset that is the problem.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Note the errors in the airport utility and fix them.
The modem should be correctly bridged and the TC in DHCP and NAT mode.. with it running PPPOE on the WAN. Is that how you set it up.
If you have issues still tell us what OS you are running on the computer and post some screenshots.

Similar Messages

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

My airport time capsule did not set up successfully, and then status light flash amber

Hi, Guys
I am the first time user of the time capsule, please help how to proceed?
I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.

Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).

Airport Time Capsule Can't Connect to BrightHouse Internet

I have BrightHouse Internet service set up as follows:
1. Coax in
2. Splitter
3. Coax out to ARRIS modem/telephony combo (BrightHouse box) and Motorola Surfboard (BrightHouse box, for high speed access)
4. Cat 5 from Surfboard to Netgear WNR2000 router.
Note: The modem setup and splitter were installed by BrightHouse.
I want to replace my Netgear router with the AirPort Time Capsule (which to this point I have been using only as a backup drive for Time Machine).
Currently, when the AirPort is connected to a LAN port on the Netgear, I get internet to the AirPort (AirPort Utility says so). With this configuration I have the following settings on the AirPort:
1. Network - Off (Bridge Mode)
2. Wireless network - Off (the broadcast conflicted with the wireless signal from my nearby Netgear WiFi)
3. Internet connect using DHCP
4. IPv6 configure automatically
I have tried various settings to get the AirPort connected, but never works. The Airport Congifurations seem OK (green light in AirPort utility), but the Internet connectivity when plugged into the port on the back of either modem is absent (yellow light in AirPort Utility).
I've done all of the obvious stuff (made sure the ethernet cables are plugged into the proper ports, hard reset the Airport Time Capsule, reset both modems (even in very specific order). No luck.
Does anyone know if there is an issue with BrightHouse and AirPorts?

Did you power down the modem and leave it off for at least 20min.. plus or minus.. say try 5min or try overnight.. but all cable services require the modem powered off so you can swap the router. That is because the first device to connect captures the public IP and is registered by MAC address to the ISP system. To get rid of that you need the modem off long enough for dhcp lease to reset..
You also should factory reset the TC to do this. It is really hard to change roles on the TC by simple manual changes. Start afresh. None of your backups will be altered.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
After a reset the TC will go back to router default mode.
Everything else on the network will also need rebooting. This is important to change over to the new router.
Tell us how you go.
If you still have issues what model TC running what firmware??

How to connect airport time capsule through wireless internet

Just purchased an Airport Time Capsule but having trouble to connect it through my Macbook Air using wireless. Could you please help? many thanks

Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

How to connect airport time capsule to BT home hub 4

I am finding it difficult to connect my new airport time capsule (ATC) to the BT home hub 4. On opening the time machine it asks me to configure the time capsule before using. Should I be using the ATC as time machine only or should I be re-routing wireless from the ATC.

Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

Airport Time capsule has been making its first back up for 3 days and still going

Been having problems with airport time capsule (its a 2TB model my iMac is 1TB), when first used it backed up OK then wouldn't back up after a few months operation. Spoke to support on Thursday 3 days ago, they got me to delete disc from airport utility and had me check all my connections were correct then started a new first backup again.
All seemed to be ok as it showed there were 840 gb to back up. so slowly this reduced friday night to 300 gb remaining. Then Saturday it showed 150 GB of 350 GB now today it is showing 485 Gb of 534 GB but as the target figure keeps increasing just checked now it shows 535 GB!
I have entered time machine to see what is there and all file seem to have copied across but haven't checked then individually. There is only one TM folder saying Today now, so it is still on the first back up.
The other strange thing the available space on the TC is now showing 864 GB free of 2TB how can this be if my imac has only 1TB!

If you still have issues.. and you well might.. i recommend you start over..
Unplug the TC from the network and plug it by ethernet into the computer..
Do factory reset of the TC.. and do a simple setup.. leave it in router mode.. ignore all the problems.
Make absolutely sure ipv6 is set to link-local only for ethernet.
Turn wireless right off.. and start the backup again.. It might even be worth erasing the TC and start over.. It can do 60GB/hr by ethernet.. so should do the disk in around 12-15 hours. although to be generous it can take a long time when it does loads of small files.
Still got issues then tell us exactly what TC model it is.

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

HT201510 Airport Time Capsule

I need help to set up the Airport time capsule?

The Modem is from Nordnet which is connected to a satellite dish receiver it's a Newtec NTC/2252.AA modem.... that probably doesn't mean too much.
I want the time capsule to provide a wireless network, which should replace my existing wireless network.
So I have removed the existing wireless router from Nordnet and connected the Time capsule directly to the Nordnet Modem via an ethernet cable.
I did have connectivity at the first attempt first with a steady green connection led. but after trying to connect to the time capsule with my iMac wirelessly I could not and now I do not have a steady green light anymore but an amber flashing. I could never connect to the internet via the capsule but I had the Time Machine connected with the Capsule and it was functioning ok as my back up.
So I reconnected back up my previous wireless router etc and disconnected the time capsule and all functions of the router functioned ok as it did previously.
so now im trying again to use the airport capsule to run both the wireless internet and do my back ups and i just cannot get past GO.
When I open the airport utility, I only see the internet connection ( the globe) and its connected to the internet via the modem. I see also on the left drop down window which identifies the Airport capsule but when I try to connect to it, it fails giving an error message "Unexpected Error" and i can go no further.
I have done a hard reset on the capsule and tried again but cannot see the time capsule anymore.
I have run the System Information on the Network and copy pasted this information as below as you may see what the problem is.
Wi-Fi:
WiFi
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Ethernet:
MAC Address: b8:09:8a:ca:02:ad
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Service Order: 1
Automatic:
Active Location: No
Services:
Bluetooth DUN:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial on Demand: No
Disconnect on Fast User Switch: Yes
Disconnect on Idle: Yes
Disconnect on Idle Timer: 600
Disconnect on Logout: Yes
Disconnect on Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: ac:87:a3:20:1c:d5
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Wi-Fi:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: b8:09:8a:ca:02:ad
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
IEEE80211:
JoinModeFallback: Prompt
PowerEnabled: 1
RememberJoinedNetworks: 1
RequireAdminIBSS: 1
RequireAdminNetworkChange: 1
RequireAdminPowerToggle: 1
Version: 2200
Bluetooth PAN:
Type: Ethernet
BSD Device Name: en4
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Thunderbolt Bridge:
Type: Bridge
BSD Device Name: bridge0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Model Identifier: iMac1571-5A60-9E35-AFDEE673E10F
Model Name: iMac
Model Identifier: iMac15,1
Processor Name: Intel Core i7
Processor Speed: 4 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
I can run other reports as you would like to request.
i would certainly appreciate your help.
regards,
Anthony

Can not connect to airport time capsule

Here is what the current situation is:
I can setup the Airport Time Capsule (3GB) form my Mavericks 10.9.4 MacBookAir 2013 using AirPort Utility. However, after setup, I cannot connect to the time capsule using many of the standard ways. Trying both connections of wired and wireless. I have tried:
1. Connecting to the Time Capsule using Time Machine (which I can see the Time Capsule Drive as a selection), and I always get the error "There was a problem connecting to the server “XXXXXX”. Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator."
2. Using Finder side bar under Shared (which I can see the Time Capsule Drive as a selection), clicking on it, always says Connection Failed at the top of the window. Clicking the Connect As... button results in the same error message as #1.
3. Using Finder, connect to server option, entering the name of the time capsule with .local at the end, and using the ip address and it always returns the same error as #1.
Trying option #3 and looking at the Console for error messages always produces these two messages:
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Any help would be much appreciated. My computer has security scripts run on it that my company wrote inhouse and not sure exactly what is locked down and not locked down. Thank you.

Using method 3.. try
SMB://TCname.local or SMB://TCIPaddress (I hope obvious you replace with actual name or actual IP).. Please use names that are SMB compatible.. ie short, no spaces and pure alphanumeric.
No luck try CIFS:// etc.
This forces it to SMB1.
No luck ping the TC in terminal.. does it respond??
Do you have ipv6 set ot link-local only in the computer??
Your company may have locked you out.. I would not be surprised. Are you running a vpn on the computer whilst trying to connect to the local network. That will fail and the ping test will show you why.
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Interesting.. it is blocking AFP perhaps. AFP modules refused.. I do not know the errors well enough but if AFP fails there is a good chance TM won't work. So even if you can mount and access the disk I am not sure you can do TM backups.

2Tb airport time capsule

Recieved 2Tb airport time capsule as a gift. Have tried to join it to an existing wireless network not successful. When I choose join existing network it goes straight to create new network. What am I doing wrong?

The icon will only show up once you complete the setup.. setup any old way and when it completes make sure you update the TC.. close the airport utility.. wait a minute or two then reopen it.. if the TC icon is not there then the values have not been saved.
Go to the full manual setup.
Plug the TC LAN port, into the computer by ethernet.
No other connection to the TC..
Factory reset the TC.. and this time use manual method..
1. Ensure that your ethernet is correct.. your computer must be 10.0.1.2 and the TC is 10.0.1.1
Make sure ipv6 is set to link-local. This is from network preference in your computer.
2. In airport utility go to file / Configure Other.
3. Type in the IP address.. No password is needed.
4. Click OK and you will get this screen..
Apple made v6 utility fully dependent on wireless. The v5 utility would work by either ethernet or wireless.. I only recently figured out how to force the v6 to actually use ethernet.
Set the network to bridge.. set the internet to dhcp.. set the wireless to create a wireless network.
Fix up the names to all short, no spaces and pure alphanumeric.. then update the TC. Plug it back WAN port to the modem LAN port. and it should work.

Airport Time Capsule A1470

i just bought airport time capsule, and was trying to setup with Thomson TG585 v7.
i connect the ethernet cable between my Thomson and TC (Ethernet WAN).
using airport utility, it found the TC, but computer couldn't see it in order to read it
i am doing something wrong and don't know what is it, and the setup instruction not clear enough
anyone can help me to setup TC step by step
thanks,

We need to know some more..
What computer running what OS?? The airport utility needs to be v6 and running on Lion or later.
Windows version is very hard to use. It is only v5.
How is the computer connected to the TC? If you use newer Mac you must have wireless on and do it over wireless.
You must have ipv6 set to link local.
Once you meet those criteria.. it should work.. if it fails.. factory reset the TC and setup in isolation manually.
Step by step instructions here.
https://discussions.apple.com/thread/5800974?tstart=0
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

IMac vs. AirPort Time Capsule.

Hi,
On my iMac running on 10.6.8, when I go into AirPort Utility.app, I get a message saying that I have to update my AirPort, and it gives me that address to get the update: http://www.apple.com/support/airport/
However, I can't seem to get the update...
I find this very confusing.
Can someone help me please? I keep having AirPort Time Capsule problems (it says that my printer isn't connected when it is IN FACT connected, it gives the same IP address to my iMac and MacBook Pro, etc.).
Thanks!
Chris.

Did you buy a new AC model TC?
If so you are in trouble. You cannot (at least easily) configure it using the 5.6 utility in Snow Leopard. Nor can you upgrade to later version of the airport utillity without upgrading the OS.
So I would try simply ignoring the problems.. apparently the 5.6 utility will in fact work.. it is just that it shouldn't. You might need to turn on ipv6 to local link for the wireless or ethernet connection you are using.. strongly recommend ethernet.
Or if you have any iOS products with latest version OS you can download the airport utility for iOS.

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

Stuck in calculating time remaining, what do i do, its my second airport time capsule that i purchased as the first had a faulty hard drive, why is this soo hard!

This is my second airport time capsule as the first i purchaed had a faulty hard drive, so now, its been a while i keep trying hoping it will work but its always stuck in 'calculating time remaining'. i thought it was my wifi so i connected directly to the capsule using an ethernet cord, bought an adaptor as i have the new macbook air (4m old) 13 inch, still not working. Help please,i am thinknig of just returning it and getting a less expeecsive and easier one to use.
D

Mavericks is the pain here.
It can lose the network connection half way through a backup.
When you connect by ethernet (good to get that.. hope it is the thunderbolt to ethernet).. did you turn off the wireless.. this is important.. nothing changes if the wireless is still on.
I recommend you start over. Keep the wireless on for this part.
Stop the backup.
Factory reset the TC.
Redo the TC setup but this time use all short names, no spaces, pure alphanumeric.
I know the airport utility will suggest apple names..
Fred Blog's Airport Time Capsule.
Don't fall for it.
Use TCgen5
For wireless name use TCwifi (or if you want more control, TC24ghz and change 5ghz to TC5ghz).
Wipe the current TM setup.
Use A4 to reset it. http://pondini.org/TM/Troubleshooting.html
With wireless off now and just ethernet connection try the backup again.
No luck manually mount the TC hard disk in finder. Go/Connect to Server.
AFP://TCname.local (replace TCname with your new nice short name.. and use the domain which is local by default).
OR
Use AFP://10.0.1.1 (Replace with whatever IP the TC uses.. but it must be static.. easy for router mode.. not so easy if the TC is in bridge mode).
The Computer will request the password.. type in whatever password you used for disk access.. by default it ithe device password. If you did not change it then default is public.
This setup has worked for other people.
https://discussions.apple.com/thread/5951390?tstart=0
I cannot guarantee you won't need to reboot the TC oocasionally as it does fall over.
There are other bits that I keep forgetting..
Make sure ipv6 is set to link-local for both wireless and ethernet in the computer.
Once you finish the main backup the short incremental backups can work over wireless.. so just turn wireless back on.

Airport time capsule ipv6 relaisfehler

Similar Messages

Maybe you are looking for