AirPort Time Capsule? Should I back up my files?

I'm updating to Mavricks and my laptop came with (Adobe Dreamweaver, Photoshop, ID, FC, FL, BR, FW, AI/ Mirosoft P,
O, W, X, C) for school. Is Time Machine/AirPort Time Capule only used via exteral hardrive or Ethernet cable?
http://support.apple.com/kb/HT1178

Similar Messages

I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

igonneau wrote:
Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
You can, but how are you going to back up those other files? When (not if) your Time Capsule fails, you risk losing them. See #Q3 in Using Time Machine with a Time Capsule for details.
Then can i access these files only on the time capsule without connecting it?
Not sure what you mean. You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk.

Is the AirPort Time Capsule only for backing up Macs or can I back up additional files from SD cards too as if it were an external hard drive?

I'm a professional photographer and I'm interested in the most recent features of the AirPort Time Capsule. I process a lot of data and much of it never hits my Mac hard drive. Currently I back up to external hard drives, but is it possible to back up files from SD cards mounted on my desktop on to the AirPort Time Capsule for instant access in the future as if the drive were an external hard drive (in addition to being a back up server)?
I appreciate input!

If your question is whether Time Machine can back up the data on the SD drives, the answer would be no.
The reason for this is that SD drives are formatted in Windows FAT16, which is not compatible with Time Machine, the backup application included with Macs.

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Airport Time capsule as external hard drive too?

Can the new airport time capsule work as back up and as an external hard drive? If I have photos saved in the cloud online and put onto time capsule, can I then delete from my mac and still have them on time capsule?

Apple do not recommend having the iphoto library (same applies to Aperture) on network drive.
iphoto network no no.
http://support.apple.com/kb/HT1198
It's recommended that you store your iPhoto library on a locally mounted hard drive. Storing your iPhoto library on a network share can lead to poor performance, data corruption, or data loss.
You cannot use TC as external drive it is now and forevermore a network drive.
There are also backup issues.. since Time Machine cannot backup files on a network drive.. nor can TC back itself up.
It is much better to use an actual external hard disk.

My iPad and iPhone are not seeing my airport time capsule

MY iPad and iPhone are not seeing my airport time capsule.

You cannot back up directly to a Time Capsule from an iPhone.
iOS backups are done using either iCloud or iTunes as documented here:
iOS: Back up and restore your iOS device with iCloud or iTunes

My Time Machine does not recognize Airport Time Capsule 2TB

I just connect my new Airport Time capsule 2TB and the wifi work fine in the whole house.
But Time machine does not recognize my Airport time capsule. It remain stuck on my ex baxkup My Book. If I press select disk or option nothing happen . If I click on remove backup disk nothing happen. I want to use Airport Time capsule as my back up disk.
Thank you for your help.
Guy-Gabriel

Do a full TM reset.. see A4 here.
http://pondini.org/TM/Troubleshooting.html
You might also need to manually mount the TC disk..
In finder use Go, Connect to server in the top menu.
AFP://TCname or TCIPaddress (using the actual name or IP of course).

Airport Time capsule has been making its first back up for 3 days and still going

Been having problems with airport time capsule (its a 2TB model my iMac is 1TB), when first used it backed up OK then wouldn't back up after a few months operation. Spoke to support on Thursday 3 days ago, they got me to delete disc from airport utility and had me check all my connections were correct then started a new first backup again.
All seemed to be ok as it showed there were 840 gb to back up. so slowly this reduced friday night to 300 gb remaining. Then Saturday it showed 150 GB of 350 GB now today it is showing 485 Gb of 534 GB but as the target figure keeps increasing just checked now it shows 535 GB!
I have entered time machine to see what is there and all file seem to have copied across but haven't checked then individually. There is only one TM folder saying Today now, so it is still on the first back up.
The other strange thing the available space on the TC is now showing 864 GB free of 2TB how can this be if my imac has only 1TB!

If you still have issues.. and you well might.. i recommend you start over..
Unplug the TC from the network and plug it by ethernet into the computer..
Do factory reset of the TC.. and do a simple setup.. leave it in router mode.. ignore all the problems.
Make absolutely sure ipv6 is set to link-local only for ethernet.
Turn wireless right off.. and start the backup again.. It might even be worth erasing the TC and start over.. It can do 60GB/hr by ethernet.. so should do the disk in around 12-15 hours. although to be generous it can take a long time when it does loads of small files.
Still got issues then tell us exactly what TC model it is.

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

I have a rMBP that needs to be backed up. The Wi-Fi in my house is poor and I do not have an Ex. Hard Drive. I want to get the new Airport Time Capsule, but can you accomplish it's benefits wirelessly?

So...
I have a modem across the house and my room is at the opposite side. I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi. However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
Is there any way to do this? I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
So, to recap:
I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
Thanks.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

My MacBook Pro is currently online via wifi, but the airport utility doesn't recognize the airport time capsule base station and has not backed up in 10 days

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

AirPort Time Capsule? Should I back up my files?

Similar Messages

Maybe you are looking for