Airport/Time Capsule - Slow via macbook pro wifi but fast via wired iMac

My wired imac that connects to the time capsule reads about 17mbs. But when I do the speed test that is connected wirelessly it runs at 2mbs. does anybody have any clue on what I am doing wrong? or why the speeds are so slow via my macbook?

KenRN wrote:
does anybody have any clue on what I am doing wrong?
i'm not sure you're doing anything wrong. for starters, a hardwired (gigabit 1000 mbps) connection is way faster than wireless-N (at best 300 mbps).
you could try if changing the channel your wireless network is broadcasting on brings about a bump in speed. you might be suffering from _*wireless interference*_.
perhaps one of your neighbor's wireless networks is interfering with yours. download iStumbler and note the channels of the other networks in your vicinity. select a channel that is as far away from those as possible.
JGG

Similar Messages

  • Time capsule slow with macbook pro

    Hello,
    I'm using a  Time Capsule 2T with a MacBook pro 2.0Ghz Intel Core i7, 8GB ram, OSX 10.9.2.
    I have a 10mbps internet plan and it works perfectly with my iphone or ipad mini using the wireless signal.
    But with my macbook pro, the speed goes down to 1mbps, at maximum...
    I've reseted my modem, the Time Capsule, macbook and nothing changed...
    Does anyone know what could be happening?? Tks!!!

    Have you tested with ethernet? From the specs of your machine it should still have ethernet port.
    That is the first test.. with wireless off.. as it helps to establish if the issue is just wireless or is some network problem. If it is still slow post back without doing anything else.
    Next test.. copy a file to the TC.. use a big file, a system update or some such.. copy it from the computer to the TC.. and TC to the computer. What speed do you get??
    That establishes if the problem is wireless overall or is it wrongly setup somehow.
    Test with wireless should be about 3-5M from the TC.. no need to be right next to it.
    Make sure ipv6 is set to link-local in wireless setting on the computer.
    Do the wireless diagnostics, which is built into the OS. See http://support.apple.com/kb/HT5606
    Follow all the wifi best practice.
    No luck post back your test results.

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • Time Machine back-up (via a Time Capsule) on a MacBook Pro

    Can I create a Time Machine back-up (via a Time Capsule) on a MacBook Pro using Snow Leopard as the OS and then upgrade my OS to Mountain Lion (a few days later) to continue using Time Machine?

    then upgrade my OS to Mountain Lion (a few days later) to continue using Time Machine?
    I am not sure what you mean by "to continue"
    You can continue.. but upgrading is not required "to continue"
    Often you will have issues though. It will create a very large backup, due to the new OS. And going back to Snow Leopard might become impossible.
    I think personally it is better to have a backup of your machine before upgrade .. and keep it separate to later backup after the upgrade.
    You can also do a disk image of the computer running SL to external drive just using free edition of superduper or even disk utility.
    Upgrade installs are never as good as a clean install btw.. !!

  • HT1176 Initial Time Capsule backup on MacBook Pro that doesn't have an Ethernet port

    I just got a 3TB time capsule and am trying to backup my MacBook Pro. The initial process is very slow, but my MacBook doesn't have an Ethernet port. How can I connect the time capsule to the MacBook Pro to make the initial backup go more quickly?

    A very good investment to make would be......
    Apple USB Ethernet Adapter - Apple Store for Business (U.S.)
    Why Apple chose to leave off the most important port in networking is a mystery.

  • HT3275 Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?

    Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?

    If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
    I am received an error on my Time Capsule   which states the backup disk image  "Volumes/Data/MacBook Pro. sparse bundle? is already in use.  so time machine couldn't complete the backup to time capsule - any suggestion

  • Como accedo de mi mini iPad el disco duro de mi time capsule? Mi Macbook pro no enciende.

    Como accedo desde mi iPad el disco del time capsule? Mi Macbook Pro no enciende y necesito accesar el disco del time capsule desde mi iPad.

    Hi I was using disk utility, right now my mac cannot read any internal drive even the original, I test both drives the original hd and the ssd. So I took the mac with a technician to try to fix it, he said that the flex sata cable is bad, so I am going to replace it, unfortunately he does not have it in stock as soon as I get it I will try to use the ssd, I know that is working right now I am using it in the USB port.
    Why do you think sata III is not the problem?
    Thanks.

  • HT3275 How do I correct this problem: "Time Machine couldn't complete the backup to "Robert's Airport Time Capsule."  The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

    How do I correct the following problem?
    "Time Machine couldn't complete the backup to "Robert's Airport Time Capsule".
    The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

    xor. wrote:
    I switched off the TM  for 10 seconds and my laptop still complains about the backup image ...  is in use.
    Some ideas?
    There is some more details here.
    C12 http://pondini.org/TM/Troubleshooting.html
    Tell us more if you cannot get it working.

  • Airport Time Capsule slows down internet speed while uploading app

    Hi All,
    Internet speed is going down drastically when I am submitting any iOS app to iTunes Connect.
    Previously it was not like this.
    I have updated my Macbook Pro to Mavericks and using Airport Time Capsule for wi-fi connection.
    Is anyone facing this problem? Any help on this will be very much helpful.

    I have almost the exact setup as you, and airtunes never slows down my internet connection.
    Has it just happened recently? Have you done a reset on the TC? Make sure you are using the g network, and not in the b only mode.
    You can also make sure everything on the network are getting good signal. You can check the signal strength from Airport Utility (in the logs and Stats pane).

  • Airport - Time Capsule slowed to a crawl

    My 6 month old Airport time capsule is grinding to a halt and now can only achieve 0.5mbit/sec (both wired and wireless)) throughput when connected to the internet, even though the Netgear DSL modem alone achieves 15mbit/sec, so the line is OK. This also happend to my old TC so I bought the new upright brick version, which has been fine till a few months back. The wireless function itself works fine, although connects to the net at the same basic slow speed. I have tried everything. Changed cables, factory resets++, unplugged everything else etc. I see others have had similar problems around the chat rooms, but no solution. Any ideas?

    I believe there is a WAN port compatiblity issue.
    Did you buy a crossover cable to try?? They are still readily available and cheap.. and it is worth a go..
    Or if you have a small 10/100 switch you can place between the netgear and the TC to see if you can get the ethernet to link correctly.
    Apple removed all diagnostics.. in the end if you make no progress, it is under warranty and just return it for replacement as being faulty. (I think it is not faulty .. it is actually buggy).
    There is more testing I can suggest but I think the above is more relevant.
    What role does the Netgear have? ie is it modem or full modem and router.. in which case the TC would be in bridge mode??

  • Connect to AirPort Time Capsule remotely via Windows 8?

    Is their a way to connect to the new AirPort Time Capsule 802.11ac remotley via Windows 8, 7, or XP? I've tried to open up the smb port (445) but i get no luck on my mac or pc. I opened the afp port (445) and i get right in. Any suggestions?

    SMB is blocked by 90% of ISP's around the world.. the number of unprotected windows computers that would be exposed opening SMB would probably cause the WWW to collapse.
    SMB is entirely unsafe.. it is a local LAN protocol to never ever be used over the internet. It has poor security and when people setup LAN sharing it is often setup with none. 
    The TC does not expose SMB to WAN.. only AFP..
    And no windows computer has AFP protocol add ons.
    Summary.. it cannot be done.
    Now the right way.. Use a Mac. Either directly or via BTMM and iCloud.
    Or relegate the TC to bridge and buy a proper vpn router.. Connect to the network using vpn and you can fully access all network resources as if you were on the local lan. A vpn router is not expensive.

  • Just plugged in Time Capsule and one MacBook Pro works fine on WiFi while the other MacBook Pro and iPad 3 keep disconnecting. Any ideas?

    Additionally, the wifi icon at the top of the screen has an exclamation mark on the MacBook Pro that doesn't connect. We've tried restarting the machine, the Time Capsule but nothing has helped.

    Just called Apple Support and it turns out we had the settings wrong. We're all set now!

  • Time Capsule with new MacBook Pro

    I recently purchased a new MacBook Pro and synced it with my old computer. How do I get it to connect to my Time Capsule to pull old files? It wants to start a new library under the new computer, but I need files from my old computer on my new one.

    From your profile.
    Your old TC.. is more than old.. it is ancient.
    Time Capsule 802.11n (1st Gen),
    I mean like seriously from bygone era.. and very likely to not appreciate even more load than it already has. I hope you are planning for what happens when it finally bites the dust.. they tend to go rapidly .. like one day it works.. next it is over.. all over. 
    I am looking at the option of picking up a new USB 3.0 external drive (e.g. Toshiba Canvio Basics 2TB or Slim 500 GB) and plugging it into the (unused) USB port of the Time Capsule for my MBP Time Machine backup.  Will this work?
    Yes it will.. but slow.. very very slow.
    I imagine that MBP Time Machine setup will show 2 drives to back up to and I would simply select the second/USB drive as backup.
    Correct.
    If this setup works, I am also wondering if I should do the initial backup via USB 3.0 without the Time Capsule intermediary to speed up the process.  My Time Capsule doesn't sport a USB 3.0 port, but the new MBP and USB drive will.
    Sadly no, that is not possible.. Time Machine does not work the same way on network drives cf local drives.. you just have to live with the very slow backup.
    So of course this is also impossible.
    Also, can I switch back and forth between using Time Machine using 1) Time Capsule with USB drive connected for wireless backups at home and occassionally plugging the 2) same USB 3.0 drive directly into the MBP for on the road backups?
    But you can buy a second USB drive and take it with you.. you can setup two different locations for backups and TM will recognise when the USB drive is plugged in.
    You could also use CCC and create a bootable drive image.. which will get you backup and running in a few minutes cf TM which can takes several hours of absolute brain beating. CCC backups means you are more likely to recover files than simply using one backup utility. You can also use CCC to the USB drive at home.. now and then.

  • Migration Problems with Time Capsule and New MacBook Pro

    Hopefully someone on here can help with with this problem I'm having. I just bought the new 13' MacBook Pro this week from the store and I no longer have my old MacBook Pro. I have a Time Capsule with complete backups of my old MacBook Pro and I also have the internal hard drive from it as well.
    I had installed the beta version of Mountain Lion on the old MacBook Pro and the new one still has Lion.
    The problem is that every time I have tried to use the Migration Assistant (and I've tried 3 times now) my files and applications are getting messed up.
    iPhoto won't open. It says that it needs to be updated but when I check to update it it says that there is no update needed.
    I'm seriously about to beat my head against the wall because every time I migrate the data it takes about 12 hours. I'm thinking at this point that it might be easier for me to just swap out the internal hard drives in the units because it is possibly an issue with the OS' and wait until next month to try migrating to the new drive again after Mountain Lion is officially launched.

    Bob,
    I appreciate your honest and prompt response. I was VERY SPECIFIC when I told the sales rep I was hoping to use the Time Capsule with two different MacBook Pro's on different subnets (one is behind a firewall on a router, one is directly connect to a WAN side IP with no firewall) and the sales rep made a point of saying that the dual band feature would facilitate this connectivity which left me with the impression (obviously wrong) that the WiFi features of the time capsule could be used to communicate with multiple Macs regardless of their own networking configurations. (I have been configuring fairly complicated networks for 20 years and only bought my first Mac two and a half years ago; the second Mac is only six months old; the third will be bought next month.)
    This isn't the end of the world for me... it does require reconfiguring my network and doing a lot of port tunneling for the box outside of the firewall in order to bring it inside as well as giving up some remote access redundancies (which were based on the ability to connect to both machines using VNC software which is port specific which means that it needed separate WAN side IP addresses).
    Overall I love the Mac approach compared to the nightmare that was (is) Windows (although I do also run an Ubuntu Linux box just to keep me honest). That said, your sales reps do your products a HUGE disservice when they give glib and incorrect answer to what was, I believe in my case, a very specific and precise question.
    Bill Wood
    Watertown, Mass.

  • Time Capsule With My Macbook Pro

    I am planning on buying the 1 tb time capsule and I am wondering on if it will be sufficient to cover the entire house, From what I hear they are capable of getting a good range but have the ability to be expanded with the airport express. I am in a 6500 square foot house and need it all to be covered! It would be great if I could also have the basement covered on top of that, So could you tell me the range your getting and the best place to place it eg top floor, main floor or basement
    Basically will cover around 8400 square feet alone if not how many other air port express units will I need to buy

    Mark,
    There are other factors other then space to cover to take in to consideration such as are your walls and ceilings concrete? Is your studding metal? How many floors are in your house? These are all very important. Also if you have an older Macbook Pro pre Wireless N note that the signal will not be as strong because it will not be able to take full advantage of the N technology. I would suggest at least 2 Airport Express' to work alongside your Time capsule to guarantee that you are getting maximum coverage throughout your house. Feel free to let me know if you have any questions. Good Luck.

Maybe you are looking for

  • My ipod touch 4g wont let me sync apps.

    I want to sync apps to my ipod but it won't let me!! I have successfully synced apps before but just recently, i thought something was wrong because the app store dissappeared from my ipod home pages and it wouldn't let me delete apps (by holding on

  • Athlete Looking for an iPod Set-Up

    Hello- I am going to switch t the iPod, but since I listened to Mr. Jobs podcast on all the changes that were happening (about 3 weeks ago), I thought I would try to get some help with getting a good set-up for my triathlon and biathlon trials and pr

  • Where can I find the "install.flashplayer" exe file after downloading it

    I successfully downloaded flash player for Firefox 24 several times (with no error messages), but I can't find the exe file anywhere. Where is it? I uninstalled a previous Flash Player version with Windows uninstaller by mistake, and now I don't have

  • Searching characters in numric field

    Hi all, I would like to find , whether atleast one character is present in a numeric variable.   568866A55 should tell me that is A is present in the variable. regards, Satya

  • Regd Attachment Download...

    Hi All, We are using SAP Integrated ITS 640, basis patch level 18 . We are able to download the attachment by clicking on export button in Display PO (ME23N)transaction.When we directly try to open the attachment by clicking on the file , we are prom