Airport time capsule will not communicate with apple tv

I have just purchased the new AIRPORT TIME CAPSULE...it will not communicate with my APPLE TV.. 

Is the Time Capsule the only wireless router in your current network configuration? That is, is it connected directly to an Internet modem (and not another router) via Ethernet? Is the Apple TV in the same room, different room, or different floor from the Time Capsule?

Similar Messages

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

    Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
    Is it because the backup on progress?

    Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
    Make sure you are using ipv6 in the computers..
    See
    http://support.apple.com/kb/TS4597
    The 6.3 utility will not work without it.
    Make sure all names are short, no spaces and pure alphanumeric.
    Do a full reset and start over.
    But there are no more controls.. you cannot set mode..
    You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
    Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

  • Time Capsule Will Not Connect to the Internet

    I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

    I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
    o Open AirPort Utility - Click Manual Setup
    o Click the Disks icon
    o Click the Disks tab just below the Disks icon
    o Click the Erase button in the center of the window
    The Quick Erase option will be fine for your purposes. This will only take a moment or two.
    When you are ready to backup the iMac,
    o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
    o Open System Preferences (gear icon) on the dock
    o Open Time Machine
    o Click Select Disk
    o Click on your Time Capsule to highlight it
    o Click Use for Backup
    The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
    Message was edited by: Bob Timmons

  • Time capsule will not hard reset

    Have a older time capsule will not reset any method. Light just keeps flashing yellow

    Can you access it via the airport utility.. if so you can reset via the utility.
    When you press the reset button with a paperclip or toothpick you should feel the switch.. it is fairly normal switch effect like the keyboard. If in the past you pushed too hard you have bent and jammed the lever.. so it is now broken.. the only way to fix it is to open the TC and fix the lever arm.
    BTW the light always flashes yellow.. when you have done a successful reset it simply flashes faster.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Time Capsule will not start

    My Time Capsule will not complete the startup sequence as indicated by a solid amber light on.  I have tried pushing the reset button for more than 5 seconds to no avail.  I also tried holding the reset button while connedting the power source and that did not work either.  Any ideas?

    Let's clarify how the normal startup sequence occurs when you perform a Factory Default Reset
    Power off the Time Capsule (TC) for 4-5 minutes
    Hold in the reset button, and while you continue to hold it in, plug the power back in to the TC
    Continue holding the reset button for 8-10 seconds after you plug the power back in and then release the reset button
    The TC should display a solid amber light for approximately 25-30 seconds and then begin to slowly blink amber. The blinking amber is your signal that the TC has fully reset and is now ready to be re-configured.
    If the amber light stays solid and does not change to blinking after 25-30 seconds, and you have tried the Factory Default Reset a few times, then I'm afraid that there is an internal electrical problem with the TC and you will need to get in touch with Apple to let them have a look.
    Please post on your results.

  • Time Capsule will not mount

    To begin, my finder stopped working and I was advised to re-install Snow Leopard. I did so confident that I could backup from my Time Capsule. However my Time Capsule will not mount and at times cannot be found. I am reluctant to change settings which may result in me not being able to ultimately restore my files.
    Where do I go from here? Any help much appreciated.

    I had the exact same issue. What actually got my attention was the loss of the internet first. That took pulling the power on Time Capsule and plugging back in to the net back. Then I notice time capsule wouldn't update -- my Time Capsule disk wasn't visible. I tried everything I could think of, resets, hard resets and new passwords all the way around. There was no issue with the network access it was great -- good on wireless, good on ethernet. Just no time capsule disk visible anywhere -- not in Finder and not in AirPort Utility Disks.
    I finally downgraded my firmware to 7.3.1 (Airport Utility -- Base Station > Upload Firmware) --- and that still didn't work. Had to go pull the plug again just to get out of the yellow light.
    With nothing to loose I upgraded the firmware back to 7.3.2 and voila --- an error message!! "Internal Disk Error" --- at least I was getting something.
    A quick search turns up the solution to this issue...just erase the dis in the AirPort Utility. Open the Time Capsule in AirPort Utility, go to the Disks tab, select the disk and click Erase.
    PIA - but it is all good again. I thought I had a HDD failure.

  • My wireless hp printer will not communicate with my hp pc

    my wireless hp printer will not communicate with my pc

    Please read this post then provide some details. What printer model? What operating system? How is the printer connected - Wireless LAN or bluetooth?
    Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
    The TC runs too hot..
    Look on ebay for "Time Capsule power supply"
    You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
    If you can DIY it is really only a few dollars worth of capacitors that go bad.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    For a bunch of alternatives.

  • My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
    Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

  • My OS is windows 7 64 bit. My computer will not communicate with my HP Photosmart A646

    My OS is windows 7     64bit. My computer will not communicate with my HP Photosmart A 646 portable printer.
    It says it is ready but when I go to print a picture (4x6 or 5x7) that printer is not available. I downloaded an updated
    driver but no change.
    TY or any help
    Tfoot

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer deskjet f4200 will not communicate with computers

    OK so I am at a loss I know the communication is the issue.  I used this without problem from install till I had to have the computer crashed. Any help ? I have tried installing twice and the doc numerous times.

    Hi @cmac22,
    Welcome to the HP Forums!
    I understand that your HP Deskjet f4200 printer will not communicate with your computers running Windows Vista. I am happy to look into this for you!
    Please, take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
    Hope this guide helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Time Capsule will not reset

    I'm trying to delete old user devices from my access control list, but after I remove them, the Time Capsule will not reset properly.  After I delete one of the devices, click on Update, the time capsule gets stuck during the update and never fully resets.  If I pull the plug and restart the time capsule, it reverts back to it's previous state with the devices still in the access list.  Is anyone having this trouble?

    Dear Stephen,
    I have the same problem and I found this thread describing the same thing on another forum. Each time I try to change any setting this happens (i.e., TC won't reset and I have to unplug it before I can use it again).
    When the postings in the mentioned thread are any indication no reset (hard or soft) will have any lasting effect. But of course, I will try to reconfigure and see what happens.
    Any solution or localization of where the source of the problem (firm-/soft-/ or hardware) would be highly appreciated:)
    Best
    Rene

Maybe you are looking for