Airport time machine, browsing files on my laptop

I have a 2TB ATM and wanted to access files on there to delete - how can I do this? AS this TIME MACHINE also works as a Hard Drive

By Time Machine (software on the computer) I presume you mean Time Capsule TC or ATC), (hardware router with hard disk inside).
You delete files inside a time machine backup to your peril.
See Q12 here.
http://pondini.org/TM/FAQ.html
Storing files on the TC is risky. There is no backup and TM cannot backup files on the TC.. so files cannot be readily backed up unless you do it manually or use a third party utility.. and you still need a target to store them.. TC is not that reliable.. less reliable in fact than the hard disk in your computer.

Similar Messages

  • I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
    Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
    It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
    http://pondini.org/TM/18.html
    Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
    Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
    My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason.  At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups.  At that point, you can erase the USB drive and use it for another purpose.

  • Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?

    I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?  Also, its connected via a powered usb hub.

    I assume that you are using  Mac operating system 10.4.11, as your profile indicates.
    The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
    Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
    Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

  • Time Machine backup file corrupted and locked

    This morning when I switch on my Mac there was a dialogue box telling me that my Time Machine backup file was corrupted and that Time Machine would have to create a new backup file.
    I am backing up my Macs to a disk connected to my Airport Extreme. It's been working for months without any problems. Other than this morning. Time Machine buddy had the following message:
    +Starting standard backup+
    +Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
    +Mounted network destination using URL: afp://[email protected]/MyBookHome+
    +QUICKCHECK ONLY; FILESYSTEM DIRTY+
    +Runtime corruption detected on /Volumes/MyBookHome/iMac27.sparsebundle (fsck_hfs -q termination status: 3)+
    +Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
    +Mounted network destination using URL: afp://[email protected]/MyBookHome+
    +Backup verification failed for image /Volumes/MyBookHome-2/iMac27.sparsebundle!+
    +Moved previous backup image to /Volumes/MyBookHome-2/iMac27_2010-11-01-032949.sparsebundle+
    +Recovery backup declined by user.+
    +Backup canceled.+
    +Ejected Time Machine network volume.+
    Has anybody seen something like this before?
    I now have a locked and renamed sparsebundle on my disk and backups are not working anymore.

    aschmid wrote:
    Yes you are right, I know it isn't supported - as so many other things but they work!
    This one is notorious for working for a while, then . . . not.
    In addition to the problems above I got a pop-up from Time Machine saying the backup file is broken and it needs to create a new one. I told it to go ahead and what happened is that it actually proceeded to DELETE the old backup file before creating a new one - there goes my several months of backup history!
    Yes, just as it says in the message. See #C13 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    All I can say do now is connect my drive directly to my iMac and figure out a way how I can backup my other iMac and the MacBook I have. On the AE this just worked remotely.
    Yeah. Until it didn't.
    Really not much options here to backup a home with 3 Macs!?!
    Sure there is. Back the others up to the same drive, over your network, via sharing. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details and setup instructions.

  • How to see all back ups on Airport Time Machine?

    I have lots of backups on an external HD.
    Looking for a folder/file is easy because I can see all backuped folders and files in the folder set up I have decided upon.
    I would like to see all my folders and files as these have backed up on Airport Time Machine. I just want to see these folders and files like this is the case on my external HD.
    They must be placed somewhere on Time Machine.
    How can I see these?
    I am not really interested in going into Time Machine Backups on a date related basis, but on a folder related basis.

    I am not really interested in going into Time Machine Backups on a date related basis, but on a folder related basis.
    Unfortunately, Time Machine is not really interested in working this way.  Apple takes the word "Time" in Time Machine seriously.
    The best that you will be able to do is navigate to find a folder that you want on your Mac
    Then, open Time Machine and use the timeline to see different versions of that folder

  • I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs.  The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

    I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs.  The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

    The method for setting up file sharing is described here:
    http://homepage.mac.com/rfwilmut/notes/sharing.html

  • Determining the Size of a Time Machine Backup File

    When I highlight a Time Machine backup file and then click on Get Info under File to determine the size of the backup file, the disk drive works its heart out, but the Get Info window never arrives at a determination of the file size being seemingly stuck in the "calculating size" state.
    Anybody have an idea of what's going on?
    JohnnyS

    JohnnyS wrote:
    Regarding your statement: "If you Enter Time Machine (the "Star Wars" interface), from a Finder window with a "size" column, then browse your backups, you should be able to see the sizes easily." - what do you mean by the "Star Wars" interface?
    Ah, you are new to Time Machine. Sorry, that's how you view and restore from your backups. Hold your mouse down on the TM icon in your Menubar and select +*Enter Time Machine,+* or click the TM icon in your Dock, or the +*Time Machine+* app in your Applications folder.
    If I look at the pull-down menu under Finder, I do not see Enter Time Machine. Am I looking in the wrong place? Obviously, since I couldn't get by the first step, I never got to a "size" column, and to be honest, I don't know that I have ever seen a Finder window with a "size" column.
    You can add one, by selecting View > as List, then View > Show View Options in a Finder window's menubar, and select or de-select whatever columns you want.
    I'm a little embarrassed by my lack of knowledge, but if I don't acknowledge my shortcomings, I'll never get the question answered. Thanks for taking your time to try to help me.
    Don't be. We all started at zero at one time or another.
    I'm not sure just what you were looking for in your first post. The size of all your TM backups is just the amount used on your external disk, unless you have other data in the same partition (which isn't a good idea). Because of the way TM works, you can't really determine the size of an individual backup, and it really wouldn't mean much.
    Perhaps if you clarified just what you want to know, we can help answer it.
    For more info on Time Machine, you might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.
    If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will show you how to locate the message(s) that describe the problem, then help you fix it.

  • Can anyone access time machine backup files by connecting to time capsule by ethernet cable?

    I operate an imac connected to a time capsule. It works great. My internet is connected to the time capsule with an ethernet cable and I access the internet on my imac using an ethernet cable connected to the time capsule. I can also connect to the time capsule using wireless.
    A colleague of mine wants to connect to the internet and because of location issues the only convenient way is to let him connect to my time capsule using an ethernet cable. He can access the internet fine and he uses a windows PC. Now my question is, will he be able to access my time machine backup files if he connects to my time capsule using an ethernet cable? I have not given him my password.
    Any help will be appreciated. I want to help him get online but I want to make sure he cannot access my time machine backup files.
    Thanks

    There are actually 3 passwords on the Time Capsule - assuming it has the same setup as my Airport Extreme Base Station.
    One password for the WiFi connection.
    One password to access setup of the device
    One password for access to the storage drive - most people leave the check-box to just use the base-station setup password again.
    And, as I said before, you also have the option to encrypt your TM backups.  So even if somebody runs off with the device and breaks in to the disk, it will all be garbage without the TM password.
    This is the screen as it is on my computer:
    As you can see, to access my drive I have it set to use the device setup password.
    Here is a screen shot of the other options:

  • Time Machine Browser not visible

    I am able to do backup using the time machine application. I can see the backup when I click on the drive icons and move through the file flows. The problem is when I select the time machine icon from the dock, It does not display the images that you can scan through the time line on the right side of the screen is not visible. I am very new to Apple and the Mac, this app was working properly when I first installed a usb drive. It worked for a week and then the system failed during a backup. I was able to reset the drive and remove the failed backup. I was able to then do additional backup using this drive and the time machine but the time machine browser does not work. Is there a way to reset the browser, I can not find anything in my searching various forums.
    Any help is greatly appreciated.
    Thanks in advance for any help

    Michael29 wrote:
    I Guess its all done, thank you very much for your help.
    Yay! and you're entirely welcome.
    I have been an OS2 user for many years and of coarse did windows, apple is somewhat different in the way this are done but is very stable machine. I have my MAC now for about three weeks and It just works, no crashes, the mail program never misbehaves, can not say the same for windows and outlook.
    Yes, Macs are pretty good, but they're not perfect (these forums are not empty).
    Do you think I should get an antivirus program, from what I read you really do not need one. My concern is the overhead those type of programs have on system performance.
    No. There are no known OSX viruses, and the few trojans and other malware require your participation in one way or another to load and/or run. (I especially like the ones that are hidden in pirated copies of iWork and other apps -- how appropriate!)
    Some folks, however, worry about passing Windoze viruses amongst their PC friends. In that case, the free clamXav is recommended most here, as being as good as any, and not obtrusive.
    If you haven't seen this yet, there may be a handy tidbit or two: http://www.apple.com/support/switch101/

  • MAC OS 10.7 Trying to Delete from TRASH Time Machine FOLDER (file)

    Trying to delete time machine Folder(files) from TRASH. even used secure option, goes through ok. but will not delete from TRASH. files delete from
    Time Machine Drive ok, deletion gives you more space on TM DRIVE Time Machine runs ok, How to Delete the Folder (Files) From TRASH?

    Hello Mtaff,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    You can't empty the Trash or move a file to the Trash
    http://support.apple.com/kb/ht1526
    press Shift-Option or Option key combination while emptying the Trash
    Have a nice day,
    Mario

  • I have a Airport Time Machine at my computer, a Airport Extreme in the kitchen, and I want to set-up my Airport Express in my second office.  How is this done so all show 4 bars on my iPhone?

    I have a Airport Time Machine at my desk in the office with the router,  a Airport Extreme to have WiFI in the kitchen connected by my ethernet, and I have a Airport Express in my second business office connected to the ethernet thru a switch. 
    Will this all work?   And what is the best configuration?
    Do I connect my Express to the Ethernet?  From the installation notes it seems I do, but I'm not sure?
    Any help on these is appreciated?
    NoviceJM

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • Hi, Question about secure empty trash. I moved some Time Machine backup files to the trash from an external hard drive. Now I can't secure empty trash. It starts, finds 74,003 files, and does nothing. The external hard drive shows it's empty, but it isn't

    I moved some time machine backup files from an external USB hard drive to the trash. Tried secure empty trash. It counts 74,003 items, then just sits there. The external hard drive window shows it's empty, but the info pane says it only has 50G of memory left. I left the secure empty trash on over night. It did nothing. Ideas?
    Thanks,
    Ron

    Relaunch the Finder, then from the Finder menu bar, select
    Finder ▹ Preferences ▹ Advanced
    and uncheck the box marked Empty Trash securely. Try again to empty the Trash.

  • My mac 10.8 does no have the file, com.apple.desktop. plist   I wentto lIbrary, preference and look  for it and it is not where in my mac.  I also launch time machine and file is no where on my Mac.  How do I get this file back?

    My mac 10.8 does no have the file, com.apple.desktop. plist   I wentto lIbrary, preference and look  for it and it is not where in my mac.  I also launch time machine and file is no where on my Mac.  How do I get this file back?
    thanks

    System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
    http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

  • HT201250 Does Time Machine delete files in back-ups that are deleted on my Mac?

    Does Time Machine delete files in back-ups that are deleted on my Mac?  IOW....if I need to restore a whole back-up, I don't want to restore previously deleted files.

    Does Time Machine delete files in back-ups that are deleted on my Mac?
    Not immediately. When space starts to get tight, Time Machine will start to delete the oldest file(s) to make more room, but this won't occur for some time.
    if I need to restore a whole back-up, I don't want to restore previously deleted files.
    You won't if you choose to restore from a backup that occurred after the date that you deleted the file.
    If you absolutely do not want to keep the file in your Time Machine backups at all, you do have the option to go into Time Machine, find the file, and manually delete all versions of the file from past dates.

  • Using external HDD for Time Machine and files in one single partition ?

    Hello everybody.
    I've been searching for some time now and have encountered some contradictory answers, so I turn to you.
    I would like to know if it's possible (one) and safe (two) to use a single partition for both Time Machine and file storage. I've read that this should be ok, since TM is actually only a single folder, which means the rest can easily be used as a standard Finder drive. Some people say however that this is not good to do so, because TM will run out of space quicker. But if the -let's say- 30Gb used for files where used by TM after a month, that would be the same, wouldn't it ? It would simply erase older backups. But is it safe to do so ? Will Time Machine not makes errors when accessing files or doing an entire system backup ? I don't won't to make a new partition really, that's why I'm asking you here, to let me know some arguments about it.
    Thank you very much for your answers.

    Marekova wrote:
    Yet, overlooking that, you say "safe: mostly", why is that ? where's the "danger" or, what where you thinking when you said that ? Aren't these simple folder's ? Do you mean that, because during a full backup, these "stranger" files could be a problem ? It would be great if that was clarified, since I've found no indication about it elsewhere, has anyone tryed it ?
    Oh, yes folks have tried it. That's why I (and many others) recommended against it.
    Here's a similar thread from just the other day: http://discussions.apple.com/thread.jspa?threadID=1926893 Note the responses from the top 2 "gurus" on this forum.
    I probably should have asked you what you mean by "safe." If you mean, will TM delete other files on it's partition, no, it won't. If you mean, can there be problems, then yes, there can be conflicts and difficulties, as mentioned.
    As to whether TM backups are simple folders, no, they aren't. They look like normal files and folders, but they actually contain what are variously called "hard links," "multi-links," and (my own personal favorite term) "ghost clones." Think of them as very fancy aliases. So they're not to be fooled with directly, by us mere mortals.
    If you want more on this: http://arstechnica.com/apple/reviews/2007/10/mac-os-x-10-5.ars/14
    and/or: http://www.appleinsider.com/articles/07/10/12/roadto_mac_os_x_leopard_timemachine.html
    and, if you haven't seen it yet: http://www.apple.com/findouthow/mac/#tutorial=leopardtimemachine
    You should also know that, for some reason, TM stores it's backups differently when it does them wirelessly. In that case, they're in a "SparseBundle," very different from the structure used for directly-attached backups.
    All the more reason to put each Mac's backups in a separate partition, and if you want to store other data there also, a 3rd partition for that.
    I've been using Mac since many years now, but I have no idea about backups, so excuse me if the statements appear a little childish.
    Nope. Even those of us who are "older than dirt" and have used many flavors and varieties of backup systems for decades are in a whole new world with Time Machine.
    And most of the folks on this forum who found themselves in deep trouble got there because they assumed things or didn't ask.

Maybe you are looking for

  • Ipod 3rd Gen won't hold charge

    I got a 3rd generation Ipod used for my sister for christmas, but it is having problems that I'm worried about. First of all, it won't charge through the usb cord hooked up to the computer. It does recognize it in ITUNES but it won't charge. I hooked

  • The html-el:checkbox No Longer Works If Preceded by html-el:form

    My <html-el:checkbox worked fine. But if the <html-el:form ....> ... </html-el:form> come before the <html-el:checkbox ... >, I got the runtime JSP error: "cannot find bean: "org.apache.struts.taglib.html.BEAN" in any scope". The complaint points spe

  • How to Remove the default Block for payment in MIRO

    Hi, In MIRO after posting the document message is coming, "Document no. 5105600184 created (Blocked for payment)" But our requirement is to remove the default "Block for payment" What is the necessary setting to be done to remove it. Thanks Prasant

  • Thumbnail size

    Hi, Is there a way to make the thumbnails larger beyond the slider max size. My eyes ain't so good, and it would be nice to have them larger. Cheers, Michael

  • No puedo cambiar forma de pago

    hola, deseo cambiar la imformacion de mi tarjeta de credito y no puedo necesito ayuda