Airport-tool (5.6 version)

I just got my new Macbook Pro, and found out that my Airport-tool for my Airport Extreme (old version) can not be installed on my harddrive. Can anybody me help out. Sorry about the Danish.
Thank you in advance.

If you are trying to install AirPort Utility 5.6.1........this application is only for Snow Leopard and Leopard Macs.
Since you are using Lion, you need to download and install......
AirPort Utility 5.6 for Mac OS X Lion

Similar Messages

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

Airport Extreme, Airport Tool compatibility

I have an old airport extreme I want to use temporarily to have WI FI in my house, but my version of the airport tool doesn't support the airport extreme? How can I go wireless?

I have an old airport extreme
There are a number of versions of the "old" AirPort Extreme. Can you please provide the model number of this device? It is on the bottom of the AirPort.....starts with an "A" followed by four numbers.
but my version of the airport tool
What version do you have? If you are not sure, open AirPort Utility and click on the AirPort Utility menu, then click About AirPort Utility and post back with the version number that you see there.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

BPC User Management Tools in different versions

Hi all,
I am comparing the different versions of BPC from 5.1 to 10.0 and I have the following questions about user management tools:
1)
How does "User Management Server" work?
What's the difference when it is compared with "Active Directory" and "BPC NW Authorization"?
2)
I have summarized my understand on the availability of the user management tools in different versions of BPC but I don't know if it is correct.
Active Directory
Central Management Server
BPC NW Authorization
NetWeaver version
N/A
BPC 7.X, 10.0
BPC 7.X, 10.0
Microsoft version
BPC 5.1, 7.X, 10.0
BPC 7.X, 10.0
BPC 7.X, 10.0
Please kindly correct me if I am wrong.
Thanks in advance!
Winson

Hi Winson,
You are incorrect for BPC NW 7.5 - it uses Active Directory users...
Vadim

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

I have installed airport express on my Window 7 and had problem to find the airport express.
I solved the problem by turning off my AVG firewall and the airport tool found the airport express and it went steady green.
I then turned on the AVG firewall again and it continues ok.
But when I turn off and restarted my laptop I have to follow the same procedure.
The AVG firewall is set to All Allowed for the airport express.
Is there anybody out there that can give assistance to solve this problem?

Hi,
I solved the problem myself by updating the Wi-fi driver.
Now it works perfect.

VMware tools and hardware version for Cisco vWLC

I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?

If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore.
-Scott

Can I connect an A1084 model Airport Express using current version of Airport Utility

Can I connect an A1084 model Airport Express using current version of Airport Utility?

You will need an older 5.x version of AirPort Utility to be able to administer the older AirPort Express. That would mean that you need to have....or be able to borrow for 10-15 minutes......a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

Connecting the PC by using the AirPort tool

I am using the AirPort tool to set up my wireless PC. The PC can recognize the AirPort unit, but when trying to set up the PC, there is "no connection to Apple network". And the indicator on the PC is amber, all through the indicator on the AirPort is stable green.
My PC has been rebooted and the AirPort Extreme has been returned to factory settings.
I can establish connection to the internet through windows, but that is not enough.

Direct connect
To move files by connecting your Mac directly to your PC:
Connect your Mac to your PC using a standard Ethernet cable.
Make sure that both computers are turned on.
In the Finder on your Mac, choose Connect to Server from the Go menu to open the window.
Type your PC's network address in the Server Address text box using one of these formats:
smb://DNSname/ShareName
smb://IPaddress/ShareName
Click Connect.
Follow the onscreen instructions to enter your PC's workgroup name, user name, password, and the volume or folder you wish to access.
Your PC volume should appear on your Mac Desktop.
Open the volume and drag and drop files directly from it to anywhere on your Mac.
When finished, drag your PC volume to the Trash to unmount it.
Joe

Why have apple not launced new airport express 802.11ac version

Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
Do you think they will launch one soon as wanting to extend my WI-FI network but don't want to purchase current Airport Express 802.11n version if a new model is due to be on sale in the near future as would prefer latest models/technology.
Please advise
Regards
Dave

Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
Do you think they will launch one soon ......
Sorry, but no one here on a user-to-user support forum will be able to tell you what a notoriously secretive company like Apple will do or when they might do it. We are all users.....just like you.
You would need to ask Apple about this, although I would be very surprised if you get an answer with any real information.
http://www.apple.com/support/contact/

Issues with BAT tool on UCM version 7.1.5.31900-3

Has anyone used the bulk add tool in UCM and tried to add a phone/user and received the error "too recently changed pin for pin and too recently changed credential for password"?

Hi Dmitry,
You can see this error when combining the 2 files and not following
the naming conventions;
Procedure
Step 1 Ensure that you have completed the "Installing the Unrestricted COP File" section.
Step 2 From the Software Download page on Cisco.com, download the two UCSInstall files.
Step 3 To combine the two files, execute one of the following commands.
Note Because the UCSInstall_UCOS_UNRST_7.1.5.31900-3 build specifies a nonbootable ISO, the build proves useful only for upgrades. You cannot use this build for new installations.
a. If you have a Unix/Linux system, copy and paste the following command into the CLI:
cat UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2 UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2 > UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso
b. If you have a Windows system, copy and paste the following command into the command prompt (cmd.exe):
COPY /B UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2+UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2 UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso
Step 4 Use an md5sum utility to verify that the MD5 sum of the final file is correct.
for the Unrestriced version:
•UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2
•UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2
The MD5 for the Unrestricted combined download is: 4b53a2b676f9db562c4064a2cbc32095
http://www.cisco.com/web/software/282074295/36574/cucm-readme-715bsu2-2.pdf
Cheers!
Rob
"Celebration it's around us, every nations, all around us.
Singin' forever young, singin' songs underneath that sun" - K'naan

Should I expect a major difference between 2nd gen Airport Extreme and latest version of Express or Extreme?

Assume that I am within 2-3 feet proximity of the the base station - is there really a difference in performance? Also, if I am primarly using the wifi connection, is there any significant difference in the performance of the latest version of the Express vs Extreme?
Thanks!

A second generation AirPort Extreme is a single band unit, either 2.4 or 5 GHz. Both the new Extreme and Express create both wireless networks simultaneously.
There were antenna improvements made about the time of the fourth generation Extreme. Given your proximity to the base stations you are unlikely to observe any differences due to that alone, but the ability to use both 2.4 and 5 GHz networks is a major advantage.

Airport-tool (5.6 version)

Similar Messages

Maybe you are looking for