Airport Turns Off After Sleep

After I sleep my Mac, sometimes Airport is turned off and I can't get on the Web. If I go to network preferences and view the airport connection, I can't turn airport on again. If I lock the connection to prevent further changes, once Airport turns itself off the lock is unlocked. Rebooting will turn Airport on and reestablish the connection. How can I prevent/circumvent this problem without having to reboot?
Someone suggested that another network might be interfering and I should change the channel, but I don't know how to do this... Explanation or other ideas?

I wish I could help, but I have the same problem. When my G5 Tower goes to sleep, I lose Airport connection. When it wakes, Airport is on but will not reconnect. Attempts to connect result in errors (trying again doesn't help). It's not the Airport Extreme, since that works fine with other computers. It's not this specific network (I have two parallel accounts on the Airport Extreme - one public, one private) and it won't connect at all. The only thing that works is a complete reboot. I've tried deleting preferences, resetting the network connection (ie wiping it out, re-establishing the network with password etc) and nothing happens. Is the card dying?

Similar Messages

  • AirPort turns off in sleep mode

    I have a MacBook Pro and when at home I use the built in AirPort to connect to the internet via my wireless router. Over the last two days an odd new behavior has developed. When I put the computer to sleep, then wake it up later, AirPort has been mysteriously turned off. I go into System Preferences and turn it back on, and everything is fine, but I wonder why this is happening in the first place. How can I make this stop?

    I am not sure if your AirPort problem could be related to your computers SMC. But, you might want to read here (http://support.apple.com/kb/HT1411), do some research if you think it is needed, and consider doing an SMC reset.

  • Airport turns off after restart. Any way to change this preference?

    I recently upgraded to 10.4.4 from 10.3.9. Whenever I restart my computer the airport by default is switched off and i have to manually select the network i want to join. Its a small detail, but previously in 10.3.9 the airport would stay on if it was switched on prior to the restart. Is there any way to change this preference or is this just the way airport is set up in 10.4.4?

    Try this:
    http://discussions.apple.com/thread.jspa?messageID=607421&#607421

  • IPhone 4 Refurbished broke after 40 days!   My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode!  It becomes very stubborn to get out and also extremely annoying!  Need a permant fix!!

    My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode!  It becomes very stubborn to get out and also extremely annoying!  Need a permant fix!!
    No warranty left -_-

    Guitargirlcaz wrote:
    I've checked with Apple.  They only give 28Days warranty now  :'(
    Whoever told you that is wrong. The warranty on a repair or replacement iPhone is still 90 days minimum. Quoting from their Service FAQ:
    If defects arise as a result of service, Apple will cover the repair for the remaining term of the iPhone's warranty or 90 days after iPhone service, whichever provides longer coverage for you.
    Call Apple Support and discuss your problem with them. If they agree that it's a hardware problem, they can arrange for mail-in service.
    Regards.

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • Yoga 13 display does not Turn off after idle

    I have the computer set to the balanced power option, and the disaplay is set to turn off after 5 minutes on battery and 10 minutes when plugged in. Unfortunately the screen never turns off.
    Anyone know how to fix this problem ?

    hi tmpst,
    Welcome to the Lenovo Forums.
    If a wireless device (mouse, keyboard, etc.) is plugged to the computer, the display, screen saver or sleep function might not work. If this is your case, try to:
    1. Remove your wireless device (might include a usb dongle)
    2. Apply the Moving mouse causes laptop to exit sleep mode fix
    If you have Power DVD installed, apply http://support.microsoft.com/kb/913405
    Let me know your findings.
    Cheers.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Airport turns off by itself and won't turn on back again!!!

    hey there, i am currently facing an issue with the airport as by it is turnning off by itself and i cant turn it back on .. i have to restart !!!
    sometimes when i turn on my mac like just now happened it is off and can;t be turned on.
    please if anyone can help i would really appreciate it
    thank you very much

    Hey, in case you haven't been able to find a solution to your original problem with airport turning off, i seem to have found the solution for my MacBook Pro. I called Apple Care and they had me to shut down my computer. Then, while holding down the four keys: command, option, R and P, push the power button to turn on the computer. Do not let up on the four keys until the start up chime has sounded twice. Then let up on the four keys and the OS will boot up as usual. They said what that does is reset your "sleep" parameters on your computer. This seemed to have solved my problem.

  • Airport turns off, won't come back w/o restart

    My Airport card has been driving me crazy since approximately late May. It turns off at will, and I've searched the net and tried a host of fixes -- resetting RAM and whatnot (holding down various button at restart), deleting and adding a new location in network prefs, etc etc -- but nothing has worked. I'm afraid (and becoming increasingly convinced) that it is a hardware issue. Things are fine when I leave my MBP on the desk. But as soon as I try to move it, or put it in my lap, the Airport turns off (icon at upper right goes "empty"). And it won't turn back on unless I restart. This happens every time I move it, though if I'm reeeally careful and hold it at the front/sides, it might make it to its new location...for a bit. Then, if I move it around too much...gone.
    I'm out of warranty and don't have Applecare, so if this is purely hardware related, I might be SOL...or have to do some surgery myself. But if anyone has any advice, it would be much appreciated. Like I said, I've tried resetting everything at startup, erasing and adding a new location in network prefs...nothing worked at all.
    (Also worth nothing, back in Nov 08, I had a problem with the board, which incidentally was also interfering with the Airport a bit....but it was mostly just causing system failure. Sent it in via an Apple Store, and when it came back, the board issue/kernel panics/etc were gone, but I had a HD hum....as in, faint clicking noise coming from the right upper area. Stops when I hold down the P, [, or ] keys, or those in the vicinity. Unfortunately, my warranty ran out shortly after, and I couldn't afford to lose my comp for a couple of weeks in there. *****. Now here I am.)

    try a security wipe, doubt it will work but worth a try
    backup device
    options- security options- general settings
    menu button- wipe handheld
    wait till you BB reboots adn test it again without restoring your backup
    if that doesnt work, try this
    make sure you have DTM 4.7 or 5.0 installed and closed
    plug in BB
    click on start- run and type
    cmd
    press enter, then type
    cd c:\program files\common files\research in motion\apploader
    press enter, then type
    loader.exe /resettofactory
    press enter
    wait till you BB reboots adn test it again without restoring your backup.

  • IPhone turns off after calls

    Why does the iPhone turn off after phone calls. I've had two phones now, both have had this problem. It doesn't happen on all calls. On one phone it happened more than the other. But the Iphone turns off after some phone calls and it takes anywhere from about 15-40 seconds before the turn on button will actually turn on the phone. Is this a hardware problem, or a software problem?

    It's neither, it's normal. If the phone was asleep when the call came in, it will go back to sleep when the call ends since this was the last thing it was doing when you accepted the call.

  • IPhone 4 OS 7.1.2 doesn't turn off after notification

    After I receive a text, email notification or missed phone call, the notification screen usually turns off after a few seconds. It's gotten to where about 40% of the time it just stays on until I manually hit the On/Off button. At first I thought it was because the phone was plugged up but it's also happening when it is unplugged.
    Anyone else having this issue or know of a fix?

    Try a reset first.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • WiFi turns off after an inconistant amount of time until restart.

    On my MacBook Pro. My wifi turns off at certain times. So to battle it when I feel its about to go I'll turn airport off and on again. I don't get it. It really happened after installing 10.5.7. Although I remember once long before that the airport turned off and went back after restart. Could have been with 10.5.3. I ran Apple Hardware test (not the through one just the normal one) and it said that my hardware was fine? Is everyone experiencing this on All 4,1 MacBook Pro 17" Models?

    Here is something but I am not sure whether it is the right thing.
    Jul 25 20:01:14 Jan-Kouts-MacBook-Pro kernel[0]: AirPort_Brcm43xx: Ethernet address 00:25:00:47:15:60
    Jul 25 20:01:14 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Down on en1
    Jul 25 20:01:16 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Jul 25 20:01:39 Jan-Kouts-MacBook-Pro com.apple.launchd[81] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
    Jul 25 20:01:40 Jan-Kouts-MacBook-Pro airportd[22]: Error: processsccallback() interfaces: 2\n<CFArray 0x10d370 [0xa03551a0]>{type = mutable-small, count = 2, values = (\n 0 : <CFString 0x101d80 [0xa03551a0]>{contents = "en1"}\n 1 : <CFString 0x102260 [0xa03551a0]>{contents = "en1"}\n)}
    Jul 25 20:45:32 e178111037 kernel[0]: AirPort: No beacon for too long time
    Jul 25 20:45:32 e178111037 kernel[0]: AirPort: Link Down on en1
    Jul 25 20:51:02 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Up on en1

  • Sticky Keys keeps turning off after every restart

    the Sticky Keys option in the universal access prefs pane keeps turning off after every restart. how can i fix this?

    It seems to be a common problem in the OS that when you restarts some of the settings get reset. For me it happens with the screeen dimming before sleep and the double click using 2 fingers and maybe others that I don't know about. I am hoping that its fixed in 10.4.7 which should be out within a week or so.

  • Monitor turns off to sleep but computer stays on???

    Monitor turns off to sleep but computer stays on???
    Any clues why? I can only shut-down and it gets annoying because I like to be working in less than a minute after powering up. Any things to look for to help?

    Thanks,
    don't know why it'd matter if I had a warranty or not since the function
    in question is apart of what I'm supposed to be getting w/ cost of computer.
    Time to load the overpriced 1 ton computer into the car and demand they fix it at the apple store. This is absurd since I originally bought this computer for music creating and it's the most unreliable computer EVER as far as stability for music. My audiophile records for like 10 sec. before the sound cuts out, everytime, but of course that's not apple's fault.
    Never buying apple again. This is straw that broke the camels back. Anyone wanna trade a pc for my G5?
    Sorry for the venting but this is where I draw the line!
    Thanks,
    Henry

  • IPhone 5 keeps turning off after battery replacement

    iPhone 5 keeps turning off after battery replacement. After 10 minutes or so, the phone freezes and shuts off, can't even use it anymore.

    Hi there Luke811813,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1.Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2.Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    3.Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4.After at least 15 minutes, if:
    •The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    •The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    •Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5.If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    •If the display turns on, go to step 4.
    •If the display remains black, go to next step.
    6.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7.If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

Maybe you are looking for

  • Shuffle no longer working with headset

    Today I got prompted to upgrade my iPod software so I did...and the shuffle (2nd gen) no longer works. The flashy lights were green orange green orange. I went to the help website and dutifully restored factory settings with iTunes. Still doesn't wor

  • Problem with NAT and RDP

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bo

  • Cannot create Oracle model MS SQL 7 - Oracle 8.1.6

    Have MS SQL Server 7.0 and Oracle 8.1.6 running on same NT server. The SQL Server 7.0 Source Model is created with no problems - I can see each table and its owner (always dbo). When creating the Oracle model the tables from the MASTER database are l

  • RMI of EJB Problem Sun Application Server 8

    I have an application that tries to invoke a remote ejb. If the client is on the same box as the ejb then everything works as expected. If the client makes the call from a different application server, then the errors listed below are generated CONTI

  • PC to I-Mac conversion

    I purchased an online PC upgrade version of CS6.  I recently purchased an I-Mac and would like to install PS on it.  The website will only allow me to download a PC version of the software. Is it possible to get the IOS version without purchasing a n