Airport Use as Ethernet Extension From an Unused Wired Router Port?

Hello all
This is my first post - I'm looking forward to using an Airport Express but I'm not sure if my intended use will work:
I am using a wired router but I would like to use the Airport Express via one of the unused router ports to establish a wireless link to a single Mac - will this work?
Thanks
Bob

Yes it will work absolutely fine.
For best results use the Airport Admin Utility to switch off "Distribute IP Addresses" this will disable the NAT Router in the Airport, as your router is already doing that for you.

Similar Messages

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

Can i connect my hdvt to an airport express unit using an ethernet cable from the tv to the airport expree, thus joining my wireless network for movie downloads

i have a 40 pioneer kuro hdtv with ethernet jack.
i want to connect it to my local airport network. The tv has some kind of "network" capability.
Could i connect by using an airport express to the tv via an ethernet cable;
Sounds unlikely. (tv also has a usb port).
thanks for any advice.
vince

linc
Thanks for reply.
I mostly want to get some youtube videos and also to send some photos to this tv.
would the netgear WNCE2001 allow me then to connect the tv to the local wifi net?

USING LONG ETHERNET CABLE FROM HUB TO VISION BOX

Hi, just ordered bt vision and wondered if anyone could tell me if it is ok to connect the hub to the vision box with a long Ethernet cable, 20m long. From the video clips on setting the system up they say if over 2 meters you must use power adaptors which uses your houses electrical ring main to send the signals. Do you lose picture signal or does it slow down connection to bt. Or do they give the power adaptors to make it easier for people so they don't have to run long Ethernet cables.
Many thanks
Solved!
Go to Solution.

Hi and welcome to the forum.
I also have an ethernet cable around 20m long and works ok, I think BT say the 2m rule so customers do not have long lengths of cable around their house, good old elf'nsafety.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

I want to use the ethernet connection from my new iMac to my Time Capsule. It seems only the Wifi is seen by either device. Ive connected the Time Capsule to the iMac. How can I get the iMac to use the wired connection

I want to connect my iMac to my Time Capsule using Ethernet. I have them connected via an Ethernet cable, but only WiFi seems to be working. How can I specify the Ethernet connection instead of WiFi? Thanks
Welked

Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot. Also be sure it is at the top of the list (above WiFi). If not click on the the wheel at the bottom and set service order.

HT4260 I am planning to extend my network via "roaming" option using an Ethernet cable as the second router is not within range of the primary router. My question is can I use an airport express as the additional router ? My pirimary router is an extreme.

Under the roaming option mentioned in the KB do both routers have to be the same ? Or can one be an express and the other an extreme ?

Setup of the AirPort Express is going to be much easier than you might imagine, although we'll go step by step here.
First, power on the AirPort Express for a few minutes, then hold in the reset button on the Express for 9-10 seconds and release. Allow a full minute for the Express to restart to a slow blinking amber light.
Connect the Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express. I assume that you have previously tested the Ethernet cable to make sure that it is working correctly.
On your Mac, click on the AirPort icon at the top of the screen and wait a few seconds for a listing of New AirPort Base Station. Just below that, click directly on AirPort Express.
AirPort Setup will open up automatically, take a minute to analyze the network, then announce that the Express will be configured to extend the AirPort Extreme network.
Enter a device name that you want to use for the Express and click Next
Now AirPort Utility will confirm that the Express is being configured to extend using Ethernet.
When you see the message of Setup Complete, click Done
That's it. It might surprise you though, to learn that the Express has actually been configured to "create" a wireless network in this type of setup.

Successfully using a Native Extension with Flash CS5.5 Pro, having issues

Hey all,
I'm trying to use a native extension due to an app rejection about the new storage guidelines. I'm hoping someone can help me figure out how to use a native extension from Flash CS5.5 and the adt command line utility (I've never used before).
Apples storage guidelines in 5.0.1 require files saved to Documents (and other places) to be marked with the icloud "do not back up" bit. I'm trying to use Adobe's IOS 5.0.1 data storage native extension to do that as I have file sharing enabled and my app downloads files I want the user to be able to copy to their desktop.
From the bits and fragments I'm reading all over, getting it to compile means using the command line adt tool (I've never used it before) because Flash Pro CS5.5 doesn't support native extensions. Also, this native extension requires a v14 SWF published (11.1) and CS5.5 only goes up to 10.2 (or higher if you install the players).
I edited the AiriPhone.xml file and pointed it to an AIR 3.1 airglobal.swc and I have AIR 3.1 overlayed in flash. I can't test AIR for iOS anymore after that change but I can get it to compile a SWF. The adt command line adt utility stopped complaining that my SWF version was 13 when it needed 14, so I assume this worked?
I am trying to compile a debug version so I can see trace statements to see if the native extension reports success on changing the bit. Here is my command line cobbled together from scraps of info on adobe.com and the -help data:
adt -package -target ipa-debug -connect 192.168.1.80 -provisioning-profile myApp.mobileprovision -storetype pkcs12 -keystore myApp.p12 myApp.ipa myApp-app.xml myApp.swf dat AppIconsForPublish Default-Landscape.png Default-LandscapeRight.png -extdir extensionDir
Before this iCloud change this app published directly from Flash Pro CS5.5 without any issues. I am only running into issues getting this app to work with this native extension and/or published correctly.
I am including the folders "dat" and "AppIconsForPublish" as well as splash screens (this app is landscape-only) as well as that extension in the folder extensionDir.
After putting in my password my app compiles into an IPA which I can drop into iTunes. It has the same general size as the IPA generated from Flash Pro. The icon is correct, etc.
When I sync this file, the progress bar goes across, I see it loading on my iPad and then once it goes to install I get a popup saying "iTunes Sync: 'myApp' failed to install."
Is there anything obvious wrong with my adt line? Has anyone else used this native extension? Ideas on what I can do to fix this?
No, unfortunately I did not build this with Flash Builder. I am an avid user of it now and this would be a moot point as it uses ANEs and changes SWF versions trivially. I have to get this to compile using Flash Pro CS5.5 though.
Any help is greatly appreciated!
edit:
Just FWIW, after I updated the .xml to use the latest AIR and such (so the version is 14) I removed the extension, exported purely from Flash Pro CS5.5 and the app works fine. As soon as I enable the <extension> in the XML I can no longer install the app. This just appears to be a noob adt publish issue.

My app downloads PDFs, movies and other information-esque files and saves them to the apps Documents folder so they can be retrieved via file sharing. These files not being in something purgable like /Library/Caches and not having the "do not back up" bit is why I was rejected.
update: It's definitely my command line building.. I took out the native extension completely and published from flash to an IPA and it works. I then run adt on the same SWF that just worked and it fails to install. So the install failing is my command line. I see this article and my command line is very similar. I'm really uncertain why it's failing.

How do I setup Airport express with ethernet connection to my modem?

Hi there - hoping to get some helpg as I'm having challnges setting up my Airport express via ethernet cable connection directly to my router. It will setup wirelessly no problem, but I occasionally get dropouts when streaming music and I'm hoping to remedy that with a direct cable connection. I know I have to change some settings in my airport utility, but haven't had any luck getting it right.
Here is my setups if it helps:
Airport express, 1st generation, model A1264
Cisco router (provided by my intenet provider)
Macbook Air, running 10.8.5
Airport utility version 6.3.1
Thanks!
Phil

Unfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme?

Cant hear audio using an hdmi cable from my MacBook Pro to an HDTV

i'm trying to watch video and streaming video from my McBook Pro on an HDTV via an HDMI cable. i can see the video but there is no sound. help?

What year was your Mac made, IE what Model year is it and what model is it?
With newer Macs all you need is a good Mini Displayport to HDMI adapter, I know the Griffin model work as I have one, and a HDMI cable.
If a Retina model that has a HDMI out port then you don't need any adapters of any kind. Just a cable from HDMI to HDMI ports on Mac and TV.
Once you have a good adapter, if you need one, and the cable is connected to the TV go into System Preferences and the Sound Applet and there should be an option in the Output section for HDMI. Enable that and the sound will be sent over the HDMI cable to the TV.
If you have an older Mac computer then you may need to use a separate cable from the Mac headphone out port to a Line In port on the TV

As there is no sound only picture when connecting my ipad, do I need to also use the audio cable from Apple TV to an older Philips TV?

I have just bought a black Apple TV and it works fine when connecting my iPad to a modern TV. However on an older Philips TV, there is no sound coming through. Do I need to use an audio cable from the optical digital audio port in addition to the HDMI cable? The TV's HDMI does not appear to support sound.

Thanks. However no luck with this TV so far. I've purchased a converter to give a digital audio signal from the optical digital audio output port. The TV has an input audio digital port, but I've had no success in getting sound so far.
Is there any setting in the Apple TV menu that may affect the signal. I've tried the setting for 16 bit signal, without any success.
Perhaps this Philips TV may just not be compatible with the new black Apple TV. I have talked at some length with Philips support desk, but they've offered nothing new.

How to set up my airport extreme to share my net connection. i have a ethernet cable from my isp which when i use in my mac, i have to enter username

I access net through ethernet cable from my isp. so i just plug in the cable in my mac and in the browser it put the username & password. now i want to use my airport express to create a wireless network so i can access net from ipad and mac simultaneously. when i use airport express both my mac & ipad gets connected to airp exp but each of them ask for isp's username and password. i can only login from either one of them and access net in that one only. Pls advice???

To allow your Mac to "see" the HDD attached to an AirPort Extreme Base Station (AEBS) that is configured as a bridge, just be sure to assign a static Private IP address to the AEBS. By default the AEBS is a DHCP client and will get a dynamic IP address from the upstream router that is acting as the DHCP server. Since this address can change over time, it would make it more difficult for network clients to find the HDD.

Using Time Capsule as an external hard drive with ethernet cable, disabling airport, using wifi from laptop

Okay, first of all, I admit right off the bat that I should have bought an external hard drive. Now I am stuck with a 3TB Time Capsule that I want to tie to my laptop via ethernet cable, without having the Time Capsule disable my laptop's current wifi. So, I want to be able to back up my laptop (using the ethernet cable and Time Machine) to my Time Capsule drive and still be able to be surfing the internet as if I didn't have Time Capsule at all.
My MacBook Pro is OS 10.7.5.
Any thoughts are much appreciated.

This is not difficult.
You need to work out one issue beforehand..
What IP address range does the computer get from the wifi router.. ?
If you get 10.0.x.x then you will need to adjust the settings on the TC to a different IP range.. eg 192.168.1.1 for the TC.
Tell me what IP you get on wireless. I will assume for now you are getting 192.168.x.x
In the ethernet setup on the laptop, choose configure IPv4 Manually.
Give the computer an IP address say 10.0.1.10 with 255.255.255.0 subnet. Do not fill in router or dns values.
You can now find the ethernet linked TC and get internet via the airport.
On the TC itself, just leave it in router mode.. and ignore all the errors.. turn off the wireless.

I have a netgear n300 router broadcasting my wpa secured wireless network and bought an airport express to extend the network. I did an Ethernet setup from a MacBook, got the green checkmark but no extension. help.

I have a net gear n300 router transmitting my WPA secured network, and I bought an airport express to use as a network extender. I configured it via an Ethernet cable from a MacBook using manual setup in airport utility. I got the green checkmark at the end, but it is not extending my signal. Can you help me?

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Netgear router can be extended wirelessly with the AirPort Express Base Station (AX).
The few non-AirPort routers that are known to work are:
Linksys WRT54G or WRT54GS (not v5)
Belkin F5D7230-4 and F5D7231
BT Voyager 2091
Netgear WGR614 v6
Buffalo WGR-G54

Airport Use as Ethernet Extension From an Unused Wired Router Port?

Similar Messages

Maybe you are looking for