AirPort Utility 5.6 no longer works on Mavericks.

Is there a way o make it work ? Do my first generation AirPort express that no longer appear on the newer AirPort Utility still work ? Their green light is on but they can no longer be managed.

Look here: http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/

Similar Messages

HT6114 AirPort Utility and AirPlay no longer works after 10.9.2 upgrade.

After upgrading to v10.9.2 last night, iTunes no longer shows my AirPlay speakers (attached to an AirPort Express) as available (other devices on same network see them fine still).
After upgrading to v10.9.2 the AirPort Utility can no longer see/connect to manage the Airport Extreme Time Capsule or the AirPort Express (the Wifi works, I'm associated to the SSID and sufring the web just fine, but I can no longer manage the devices - they don't even show up (marked as 'missing' with the option to 'forget' them in the GUI).

This worked for me.
Joseph Rose's solution (in another discussion) finally fixed Airplay for me. I now have mirroring and extended Airplay functions again. It was a long road, but in the end, removing Air Parrot and Air Display was the solution for me.
Solution:
Ran the Air Display uninstaller that I found by searching in spotlight.
Ran the Air Parrot removal tool & confirmed that the files were deleted based on instructions from their website.
Thanks to all that participated and spent their valuable time offering assistance!

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

I can not open Airport utility on my iMac after updating to maverick 10.90.4

I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?

Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/

HT6114 My CanoScan 8600F no longer works with Mavericks- No drivers available from Canon

My CanoScan 8600F no longer works with Mavericks upgrade. Canon does not offer new drivers.

The Canoscan Toolbox works with Mavericks to scan, copy, etc.
If you have Photoshop or Photoshop Elements the drivers can be installed so one can scan from within those applications.
All the necessary software (CanoScan Toolbox 5.0.1.2 Installer) can be obtained from the Canon site.
And, as Eustace mentioned, Vuescan works.
OT

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling and the 'Continue' button at the SLA is greyed out. Any ideas? Cheers 'n thanks for any feedback.

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling the software and the 'Continue' button at the SLA page is greyed out. Any ideas?
Cheers 'n thanks for any feedback.

Went around the long way and reinstalled Mavericks since the Mac was acting a little flakey occasionally of late, and now the printer as once again been installed and works ok by wire. Have not yet had time to try to connect wirelessy yet, so...
Cheers!

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Airport utility 6.1 no longer detects time capsule

After updating to the latest airport utility version 6.1, by time capsule (2nd gen) and my airport express (1st gen) are no longer found in the interface. The following message is displayed in the utility bottom section "No configured Airport base stations have been found. Airport Utility will continue searching." I have Lion 10.7.4 installed and both devices have 7.6.1 firmware. Any idea/help?

I corrected the problem by simple turning off the wiress off/on of the laptop the airport utility I was having the issue. I am not quite sure why the signal got "corrupted", but that did the trick.

Airport Express and Airtunes no longer work error -15006

This is killing me, I feel at my wits end.
I have an airport express that has been in use for two years. I use it only for airtunes from itunes through my wireless network.
I have an apple TV that I added 2 months ago and use occasionally for airtunes, but mostly for all the fine things that apple TV does.
About a week ago, sometime after upgrading to Snow Leopard and before iTunes 9 I have completely lost airtunes connectivity. At first it was just the airport express, but today it is also the apple TV.
When I choose either speaker (apple TV or Airport) from iTunes it just tries to connect forEVER. Sometimes I get the error -15006.
What I have:
24" iMac running snow leopard (wireless)
13" Macbook Pro snow leopard (wireless)
Cisco Router WRT110
Airport Express version 6.3 (wireless)
AppleTV latest software (wireless)
What I have done:
Reset and reloaded the Airport Express a dozen times. It worked for a minute after I changed the settings to require a password, but quickly went back to the same symptoms.
The airport shows up fine in Airport Utility, but will not work for airtunes.
The Apple TV shows up in iTunes and syncs properly, but will not respond to Airtunes. I have checked airtunes settings in the AppleTV and it is on. I even tried turning it off to see if it would improve the airport to no avail.
Please help

Any advice out there? I've even taken bypassed my main Extreme base to plug the ethernet connection directly into the Mac desktop to do software updates that might have been missed by going through the Extreme and wifi. While it did install one security update, it didn't affect the Express units.
I'm wondering about firmware. I have checked over and over for software updates, and my system assures me that everything is up to date. However, I'm concerned that somehow I'm missing a firmware update. My Airport Utility tells me my Extreme is running on Version 5.7, and on the few times one of the Express units shows up, it shows as running Version 6.#.
Do I need to manually install a firmware update, and if so, how? I terrified that I will mess up the ONE wifi unit that is functioning.
Ironically, my Extreme base is the oldest in my batch-both of the Express units are newer than it.

HT5022 Instructions for Airport Utility 5.6 don't work: "version of Mac OS X is not supported"

Via Software Update, I just downloaded & installed the latest version 6.1 of Airport Utility. When I tried to use it I discovered it recognizes but doesn't support my Airport Expresses (odd in itself).
I was told to install version 5.6 to manage these older devices. So I obediently tried to install it (actually it's v. 5.6.1).
But it won't install! The Installer tells me:
"AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
The system requirements are listed as "AirPort Utility requires Mac OS X v10.5.7, v10.5.8, v10.6 or later." I have 10.7.4.
What the heck is going on here????

Try this one until they fix it:
AirPort Utility 5.6 for Lion: AirPort Utility 5.6.
If that does not work:
AirPort Utility for Leopard, Snow Leopard: AirPort Utility 5.5.3.
Both will run fine on OS X 10.7.4 but since I already have them installed, I do not know if the installer will object. Both will administer all Express models except for the new dual band model.

HP OfficeJet 6500A fax no longer works after Mavericks update

After updating to Mavericks and installing the HP software drivers, the fax component no longer works. I installed the fax part of the update, and when I print to fax, instead of triggering the machine to dial a number like it did in Mountain Lion, the printer prints out garbage text. There's no relevant support page on HP's website about this issue. Anyone got their HP fax to work via print to fax from their Mac?

Hello Peter,
It sounds like you are not able to fax from your HP OfficeJet 6500A. I recommend the following steps for the issue you described:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Presonus FP-10 no longer works after Mavericks update

I updated my Mac Mini to Mavericks and now my Presonus FP-10 will not work. I know that Presonus has made a statement that FP-10 is no longer compatible with Maverick or Mountain Lion. I had it up and running in Mountain Lion. My question is can I reinstall Lion or Mountain Lion to fix this urgent problem. I am using my Mac Mini O SX 10.9 as of now.

I have now managed to get the Canon LBP6300dn printer working on my network (i.e. I did not use USB at all).
In case it helps others, here are the steps I performed.
Infrastructure:
My printer is connected by LAN cable to my Airport Extreme.
The Airport Extreme has a DHCP reservation defined for the printer (e.g. fixed address of 10.1.2.3).
I need A4 as the default paper size, so I installed the UK version of the driver (Mac_CAPT_V365_uk_EN.dmg). I do not know if the locale makes any difference.
I orginally set-up the printer when I used Mountain Lion.
My Mavericks installation on my laptop was clean (i.e. the hard disk was reformatted first)
Set-up:
The printer was switched on and installation was done on my Mavericks laptop over WiFi.
Double-click the .DMG file and follow the instructions.
Open System Preferences | Printers & Scanners.
Click + to add a new printer, the Add dialog should open.
For me, nothing appeared under the Default tab.
Click the IP tab.
In the Address: field: I entered the fixed IP address of my printer (e.g. 10.1.2.3).
The IP address should be automatically validated.
The Protocol: Field was set to Line Printer Daemon - LPD.
After a few seconds, the Use: field should display “Generic PostScript Printer”
Click on the Use: field’s menu to display available options and then pick “Select Software …”
In the Printer Software dialog, select “Canon LBP6300 CAPT (UK)” . Or the equivalent for your locale. Click Ok. Note: I could not get the “Canon LBP6300n CAPT (UK)” to work.
For me, an error “Unable to verify the printer on your network appeared”, but I clicked Continue.
I left the Paper Source Options set to none. (I do not have the 500 cassette.)
I clicked Ok to finish the adding of the printer
After this the printer was finally working for me, including duplex printing.
Anyway, I hope this might help others that are struggling with Mavericks and the Canon LBP6300dn printer.

Script no longer working under Maverick

I just upgraded to Maverick over the weekend and I can not figure out why this script no longer works. It has been working for the last 5 years.
The script moves a file my server sends per e-mail to a folder on a partition on my Mac. Here is the script.
tell application "Microsoft Outlook"
          set selectedMsg to (current messages)
          set selectedMsg to item 1 of result
          set msgAttachment to attachments of selectedMsg
          set msgAttachment to result's item 1
          set attachmentName to name of msgAttachment
          set attachmentFile to ((path to desktop) & attachmentName) as text
save msgAttachment in attachmentFile
end tell
delay 3
set submitfolder to "OS E:Users:e:Desktop:" as alias
set collectionfolder to "/Volumes/Data E/Consulting/Telephone Switch Record/2014" as alias
tell application "Finder" to move (every file whose name contains ("week ") & (do shell script "date +%U")) to collectionfolder
delay 2
tell application "Finder" to move (every file whose name contains ("week ") & (do shell script "date +%U")) to trash
I now get:
If I run:
tell application "Finder"
          open ("/Volumes/Data E/Consulting/Telephone Switch Record/2014" as POSIX file)
end tell
it opens the folder no problem so the path must be ok? or?
Any ideas why it is broken?

Are you getting the error on this statement
set collectionfolder to "/Volumes/Data E/Consulting/Telephone Switch Record/2014" as alias
or when you do the move? And what is the error number you are getting?
Also try this
set filePart to "week " & (do shell script "date +%U")
log filePart
tell application "Finder" to move (every file whose name contains filePart) to collectionfolder
to see what the string looks like.

Option-drag contacts to Finder no longer works in Mavericks

In all versions of Contacts and Address Book you could select multiple contacts, hold down the option key, then click and drag them into a folder, which would result in a separate vCard for each contact. If you did not hold down Option prior to dragging, all contacts were combined into a single vCard (eg: John Smith and 10 others.vcf).
I just installed Mavericks and now the option-drag method no longer works. As I drag the contacts to a folder everything looks like it is working as normal, except that when I drop, nothing shows up in the finder, the folder remains empty. If I don't hold down the option key, it works as normal and a single vCard is created for multiple contacts. Dragging one at a time also still works.
I would like to know if others are experiencing this as well. I assume this must be a bug, as without this ability the only way to export multiple separate vCards (that I know of) would be to drag them one at a time.

It's frustrating when Apple removes a feature you're used to using... But when they close a door....
Do the following:
1) Open the Contacts Application and select all the contacts you want to export
2) Open the Automator application and create a New Workflow
3) Select "Contacts" from the Library panel at the left
4) Drag the action "Get Selected Contact Items" from the middle panel and select "Get Selected PEOPLE" from the drop-down menu.
5) Drag the action "Export vCards" from the middle panel and select "Export INDIVIDUAL VCARDS" from the first drop-down menu and select a destination FOLDER from the second drop-down menu. Just create a new folder on your Desktop and select it, you don't want to save directly on the Desktop as this will put all your individual vcards there.
6) Run the workflow by hitting the PLAY button at the top-right of the window.
Optionally, you can save the workflow for future use, but the best practice would be to use the Get Selected Items and not the Get Specified Items, as the later would only export the contacts you already have there and not the new ones, I believe.
In any case, there's the window!
Rick.

Which Apple app's will no longer work in Mavericks?

I am using OS 10.8.5 on my MacbookAir. I was contacted by Apple to download a free update to Mavericks, OS 10.9.
I am very suspicious after having been many times forced to buy new apps working under newer Apple operating systems, because some previouly working apps suddenly no longer did after an Apple System upgrade was installed.
I lost mountains of important files created with Applesworks, including important spread sheets and data files which suddenly no longer opened because the Apple appllication used to create them was no longer supported by the newer Apple OS.
I also recall the total mess with earlier iMovie and iDVD updates most of which ensured that previous iMovie and IDVD schemes coukd no longer be opened or used.
Since Apple does not inform users of such problems before the updates are downloaded, maybe it will be of great benefit to get
a reply from other users who have upgraded already to Mavericks.
So which apps, if any will no longer work, if the OS is upgraded to Mavericks?

You were contacted by Apple to download Mavericks? Really?
We wouldn't be able to give you a blow by blow description of which apps will or will not work with Mavericks. There are a lot of people who have upgraded to Mavericks and are not having any issues whatsoever.
There are others who seem to be having every possible issue you can think of.
I would imagine that the difference in experiences here is due to the types of sofware people are running, the amount of CPU capacitity they are using to run various apps, games, etc. Whether or not they are running non-Apple applications, how often they have dropped their laptop, etc.
Since you seem concerned with messes, and problems, and losses of files, then unless you have some burning need to upgrade right at this very moment in it, it seem like it might be prudent to wait.
That's what I am doing. I am perfectly happy with Mountain Lion. There is nothing in Mavericks that I feel I can't live without for awhile. Eventually, I will be upgrading to Mavericks, because I don't want to fall behind in OSX levels for my machine. But for now, there is simply no pressing need to do so.
Bugs are being worked out. Fine tuning is being done. Enhancements are being made.
So, why rush into somehting that has been out for only two months....what's the hurry? It's not going anywhere anytime soon....
GB

AirPort Utility 5.6 no longer works on Mavericks.

Similar Messages

Maybe you are looking for