Airport utility 6.1 change ip address for router

Hi there,
I want to change the IP address for the router from 192.... to 10.....? It doesn't seem possible with the new version of the aiport utility.
Any help would be greatly appreciated.

You can change the IP address range that the AirPort Extreme provides as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click directly on the AirPort Exteme icon
Click Edit in the next small window that appears
Click Network at the top of the next window
Click Network Options at the bottom of the window
Here, you can changet the iPv4 IP address range from 192.168.x.x to 10.0.x.x
Click Save and then click Update to restart the AirPort Extreme
IF....the Network Options button is grayed out, this indicates that the AirPort Extreme is in Bridge Mode. In that type of setup, you have another modem/router or gateway "upstream" on your network. That is is the device that is providing the 192.168.x.x. IP addresses.
The AirPort Exteme simply passes through that network information to connected devices in Bridge Mode, since you only want one router on the network providing IP addresses.
You will need to check with the support folks for your modem/router or gateway if you want to modify the settings on that device.

Similar Messages

Airport Utility 6.0.0 breaks support for my Airport Express

Computer updated to Airport Utility 6.0 but that breaks support for my Airport Express. When I try to access the Airport Express it tells me I have to download Airport Utility 5.6 - but I can't find that anywhere on the Apple sites to download!

My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
~~~~~~~~~~~~~~
I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer. HOWEVER: Another user has informed me that they were able to use Airport Utility v5.6 to install Firmware v7.6.1 without any problems! This would mean anyone can avoid Airport Utility 6.0 entirely if they chose.
~~~~~~~~~~~~~~~~~~~
1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
http://support.apple.com/kb/DL1483
2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
"Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
3) The HELP has some WRONG information. Here we go:
3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
"An error occurred while updating the firmware. -6721"
Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
6) Miscellaneous changes in Airport Utility 6:
6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
6d) MAC address filtering for Airport devices is GONE.
6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
/System/Library/CoreServices/W-Fi Diagnostics
6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
--> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

Steps to change IP address for SAP B1 server

Dear Guru
My company is going to change the IP address of SAP B1 server, because I am very new in this area, so pls clarify for me the following doubt
1. May I change the IP address with the SAP B1 is running?
2. If I need to stop the B1 services, how can I stop it? Stop at windows service level? or is there any console for me to stop the service like SAP R3?
3. Do I need to stop the MSSQL service as well?
4. Do I need to reboot the server before I startup the SAP B1 service?
Regards
Guodong

Dear Guodong,
Just assuming you have only one question since that is the forum rule.
To change IP address for SAP B1 server, you need to Stop and restart the server to prevent the potential problem. B1 is not the same as R/3, you have to stop all B1 related services.
Thanks,
Gordon

Change of address for existing Plant -

Hello,
The requirement is to change the address for an existing Plant. Is this opkay to do - does this impact any other MM/Production processess.
Thanks,
RT

Hi,
Change in address will not impact on anything except the TAXES
In address detail country,region and tax jurisdiction is maintained and this fields area in use for calculation of tax then it will impact.
If region and tax jurisdictions is not in use for tax calculation then you can change.
kapil

Can anyone help me with changing email address for resetting password notification

Can anyone help me with changing email address for resetting password notification?

If you know the answers to your security questions, you can change your rescue email address as shown in step 6 in this article: http://support.apple.com/kb/HT5312.
If you don't kow the answers to your security questions or need other assistance doing this, either contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or contact the Apple account security team: http://support.apple.com/kb/HT5699.

Change IP address for WLC

I want to change IP address for WLC in production, should I convert Access Point from LWAP to IOS then convert again to LWAP ?
Regards,

Hi Friend,
The best way is configure your controlelr as primary controller for all APs. You can do so going to wireless tab and then click on each AP detail and configure this controller as primary controller.
Also if you have WCS you can do the same in one go for all APs and after that even if controller ip address is changed they will stay join to this controller.
HTH
Ankur
*Pls rate all helpfull post

Is there a manual I can PRINT for the Airport Utility Software Version 5.5.3 for Windows?

Is there a manual I can print for the Airport Utility Software Version 5.5.3 for Windows?
If there is, I can't seem to find it anywhere (in the Software, by using Google, etc).

I dont' believe there were manuals out there for different versions of the utility. That would be quite a few different manuals.
There are different manuals for the different base stations however...

Old email is closed. I have no access to it. Cannot change email address for icloud in system preferences,does anyone have a way this can be corrected? I don't have access to icloud.

Old email is closed. I have no access to it. Cannot change email address for icloud in system preferences,does anyone have a way this can be corrected? I don't have access to icloud.

Hi Joycars,
Can you not simply sign out of the iCloud account with the incorrect email? Not sure I'm following?
GB

Change company address for report: PC00_M40_PTX - Form 5

Dear Experts,
I want to change company address for report PC00_M40_PTX - Form 5. Can you please help me?
Note: Personnel area address already maintain
Thanks and regards,
Mayur
Edited by: Mayur114 on Jul 20, 2011 3:04 PM

Hi,
I checked the program, in which Include - PCPTXIN6_PDF line no 57 is used for checking the address & displaying in the output.
In that CONCATENATE sadr-name1 sadr-name2 is used for the Empr address part. Check in ur case Name2 is having any entry or not.
The name1 & name2 is 35 character length and it can be maintained in V_T001. Select the Company code & SHIFT+F5, both the fields are on top of the Name header. You can mention the details there & do a test run to check by using both the Function modules.
Regards,
Prasad lad

My Photosmart D100a wireless printer keeps changing IP Address when router reboots.

My Photosmart D100a wireless printer keeps changing IP Address when router reboots.
This question was solved.
View Solution.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Apple Airport Express: How To Change IP Address While in Bridge Mode

Hello, I have a Apple Airport Express router and it has been good for a few years. Just wondering how to change my public IP address. I am also in Bridge mode to a cisco router. Also I am on a Windows 8 computer and this is mainly what I want to change the ip for.

Power cycle the cable modem.. I presume that is what the cisco router is.. your modem.. if not tell us precise model and make of the modem.
The public IP is not changed by you.. it is changed by your ISP.. normally if you power cycle the modem on a dynamic system you will get a new IP.. if not call the ISP and request them to make a change.
It is never really necessary unless you got banned from a site.
I am on a Windows 8 computer and this is mainly what I want to change the ip for.
There is no logical link to needing a new public IP to being on a windows 8 computer.
Explain more about your problem.

Changing the Address for Shipto party for a Service Order..... pls respond

Hi friends,
When i create a Service Order, using CRM_ORDER_MAINTAIN, I want to pass Ship to party number and its address.(its not Master data from BUT000, ADRC tables.).
THe address data what i mean is when we go to Partners tab, the address you see is not master data.
I want to update this address.
Somehow i was able to create with my Shipto party , but im not able to give the address in the IT_PARTNER parameter of Crm_order_maintain.
How can i give the address aswell, when i create Service order, or even changing a service order.
Basically i want to change the address of ship to for a SO.
kindly respond....
thanks in advance,
Niraja

THis is the code i wrote to update the street: . but its not updating.. :((((((((((
pls hlp fnds...
    CLEAR: ls_input_fields.
    ls_input_fields-objectname = 'PARTNER'.
    ls_input_fields-ref_kind    = c_a.
    IF p_header-guid IS INITIAL.
      ls_input_fields-ref_handle = c_handle.
      ls_sconf_partner-ref_handle = c_handle.
    ELSE.
      ls_input_fields-ref_guid = p_header-guid.
      ls_sconf_partner-ref_guid   = p_header-guid.
    ENDIF.
    ls_partfieldnames-fieldname = 'ADDR_NP'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'ADDR_NR'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'ADDR_ORIGIN'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'ADDR_TYPE'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'STD_BP_ADDRESS'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'KIND_OF_ENTRY'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_partfieldnames-fieldname = 'STREET'.
    INSERT ls_partfieldnames INTO TABLE lt_partfieldnames.
    ls_input_fields-field_names = lt_partfieldnames.
    CONCATENATE '000000000055 ' p_header-shipto_no '        BPBP'
           INTO ls_input_fields-logical_key.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_sconf_partner-ref_partner_handle = '0001'.
    ls_sconf_partner-ref_kind = c_a.
    ls_sconf_partner-ref_partner_fct = c_00000055.
    ls_sconf_partner-ref_partner_no = p_header-shipto_no. "'0010017295'. "
    ls_sconf_partner-ref_no_type = 'BP'.
    ls_sconf_partner-ref_display_type = 'BP'.
    ls_sconf_partner-kind_of_entry = 'C'.
    ls_sconf_partner-partner_fct = c_00000055.
    ls_sconf_partner-partner_no = p_header-shipto_no. "'0010017295'. "
    ls_sconf_partner-no_type = 'BP'.
    ls_sconf_partner-display_type = 'BP'.
    ls_sconf_partner-mainpartner = 'X'.
    ls_sconf_partner-addr_nr = '0000060435'.
    ls_sconf_partner-addr_np = ''.
    ls_sconf_partner-addr_type = 1.
    ls_sconf_partner-addr_origin = 'B'.
    ls_sconf_partner-relation_partner = '48222495E5735887E1000000CC9AA02A'.
    ls_sconf_partner-std_bp_address = ''.
    ls_sconf_partner-street = 'helloteststreet'.
    INSERT ls_sconf_partner INTO TABLE lt_sconf_partner.
Can somebody give me any hints. pls ......
thanks in advance,
Niraja

Changing email address for Preferences???

Hi Everyone,
This question actually has nothing to do with SQL! I am having trouble working out how to change were my email alerts are being sent to! I login with my hotmail account, but email alerts (concerning my threads) are being sent to my work address. I can't
work out how to change were alerts are sent to...such a seemingly simple thing! However the MSDN site isn't the easiest to set preferences in!!!
Primarily I use the MSDN site for learning about SQL so I am specifically interested in changing where alerts related to the following URL -http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ are sent to...
Of course I have Googled this, but with NO LUCK (admittedly I didn't get super desperate and Bing Search!).
Any help here will be greatly appreciated. If your an Administrator with enough skill to move this thread can you please share instructions on how to change the notifications email address???
Kind Regards,
David

Hi David,
You can change the email address notifications are sent to via 'My settings'. To get there, click on the 'Quick access' dropdown in the upper left (under the 'Ask a question' button) and then click on 'My settings'.
There's a 'Configure alerts' section there where you can change the address.
Just as a heads up (you don't have to worry about this, but I'll post this for future people who find this thread), making any changes in 'My settings' mangles all HTML tags in your signature block. You'd need to paste in fresh HTML before saving the changes
to ensure that your signature doesn't break.
EDIT:
I just learned that you'll also need to confirm the new address that you enter into the 'Configure alerts' section before notifications will start being delivered to this new address. The confirmation email may take quite a while to appear.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Changing Email address for BTWiFi-with-FON

Is it possible to change the username/email address for logging in to BTWiFi-with-FON as the btinternet.com email address I got lumbered with is very long (29 characters) and awkward to key in on a smartphone?
Solved!
Go to Solution.

A1944 wrote:
pottyperson wrote:
Keep the phone's Wifi switched off until you actively want to use it. That will probably save on battery usage as well.
Thanks for the idea, but unfortunately that would not help as I use it on the WiFi at home quite a lot, especially when I have the PC switched off.
Sorry, I got the wrong end of the stick. You need to set the phone to prioritise wifi connections, but I don't know the procedure for iPhone as I have Android. You could try simply deleting BT WiFi from the list of connections to see if it gets a lower priority next time you connect to it.
You can click the white star next to this message if you think it was helpful.

Change Invoicing address for number of PO's

Hi
We have a requirement to change the invoicing address for all PO's existing in the system.
How can we achieve it?
Please help.

Hi,
There is no invoicing party mentioned in PO header.
Company procures raw material from one comapny code to another c.code.
c.code is coming as delivery address not invoicing address.
The invoicing address mentioned is of Customer.
There is the requirement that invoicing address has been changed and all po that were subjected to send to previous address need to get updated with new invoicing address.
I know that address is getting updated from adrnr field in adrc table but dont know how to change for mass po's.
Please help.

Airport utility 6.1 change ip address for router

Similar Messages

Maybe you are looking for