Airport utility -6753 on Wifi, but ok on ethernet

I have an Airport Extreme as my main router with DHCP at 192.168.15.1 and using access control to set the computers allowed on my network. An airport express in roaming router mode has been used to extend my network for over 7 months now, but recently I've had problems connecting. I decided to reset the Airport Express to fix these issues. The Airport Express has an IP of 192.168.15.88 in bridge mode and running Airplay for my Denon audio system. The problem is that I can see both routers in the Airport Utility via Wifi or Ethernet at home, but can only chance settings via Ethernet. When using Wifi, I get the -6753 error. I also can't ping 192.168.15.88 from my computer via Wifi, nor can I access AirPlay via Wifi. I can ping and Airply over Ethernet. What step am I forgetting during the setup?
The Airport Extreme is working fine and I can access
BTW, I am using a Lenovo x201 running Win7 and HP DV8T running Win7.

If you haven't yet, try performing a "factory default" reset on your AirPort Express. This should get the base station back to its "out-of-the-box" configuration. Once completed go ahead and reconfigure for your networking needs. Hopefully this solved the issue. If not, then it is possible that the audio circuity inside the Express has failed. Unfortunately there a no user serviceable parts.
One test is to connect a pair of stereo headphones to the base station's audio port. This would test its analog audio output. To test its digital audio you would need a TOSlink cable with one minijack end and a digital receiver or other device.

Similar Messages

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

HT1218 My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

**** little info about your equipment.
If you just replaced the router with an Airport Extreme or Express:
disconnect the modem from power, disconnect the new router from power, connect the modem to power and wait till it os fully started up, then connect the new router to power. After a while the amber light will turn to flashing, then after a while it will turn to green. Then with AirportUtility (in Aplications/Utilities) it should be configured with the password.

Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?

Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

I have connected a new time capsule to a dsl modem. It doesnt see the internet. Airport utility says: Disconnected. But it isnt. Internet tab shows PPPoE. Must I enter Account Name or Password? If so, where do I find them? If not, what do I do?

I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem. If I click the internet Icon in Airport Utility it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
Or am I completely on the wrong track.

Thanks. The modem is a Speedtouch ST585 v6. How do I know whether it is in adsl bridge? Also this is a modem-***-router. Does that make a difference?
If you did not put it in bridge then it is not in bridge..
Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
And I am using Airport Utility 6.0. How do I get the earlier version?
By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed.

Airport Utility can SEE TC, but not CONFIGURE it?

I received my 1TB TC about a week ago (dual band).
Setup
I have AT&T U-Verse with a 3800HGV-B modem/router. Before my TC I had a Linksys Wireless router with DHCP turned off (I let the AT&T router handle DHCP). And yes, I turned wireless on the AT&T router to OFF.
I knew that I wanted to let my TC handle DHCP so when I plugged the TC in and "set it up", I went to access the internet and my AT&T router put the TC on "DMZ Plus". The TC is handling DHCP for all of my wireless devices, and the AT&T router has 3 clients (2 cable boxes and the TC).
Problem
Every now and then I will go to access the USB hard drive plugged into the back of my TC and it will time out. Going into Airport Utility, it will recognize my TC, but when I click "Manual Setup" it times out trying to access the TC configuration. Internet still works, so the routing is fine, but I can not configure it. I've tried this on my iMac and my Macbook. The status light always remains GREEN.
The only solution is pulling the power plug.
My TC is on a 10.0.1.X ip schema network and my AT&T is on a 192.168.1.X schema. Am I having a DHCP conflict? Can anyone else think of why this might be happening?
ALL firmwares/softwares are updated. EVERYTHING is wireless with the exception of the ethernet cable connecting my AT&T router to my TC.
I've searched the internet high and low and can't seem to find any answers.

*This just in!*
Apparently unplugging the USB hard drive I have plugged into my TC will resolve my problem COMPLETELY. One question...WHY?!
This doesn't seem to add up, but sure enough -- If I unplug the USB hard drive connected to the TC, I have NO PROBLEMS accessing the configuration for the TC. I did notice that the USB hard drive's power light turns off when the drive is not being accessed.

Airport extreme continuously blinks orange, it is an older model not used for some time. airport utility can see it but just reports an unexpected error message.

My airport extreme continuously blinks orange. I have tried unplugging and starting again also pressing the reset button to no avail. It shows as connected to the internet but when selected in airport utility I just receive the message "unexpected error occurred try again" and I can't get past this point. any ideas?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

Cannot print over wifi but only via ethernet

Hello,
i have c4780 hp printer, i have installed it on laptop via ethernet. All works fine.
If i unplugg network cable on laptop and use only wireless to connect on my network, the printer cannot print.
I have a dlink 2740b wireless router.
there are particular setting to insert in router configuration?
i have try to install on other pc via wifi but result is the same.
just i plug the network cable the printer work immedialtly..
Why?
Thanks
Giulio

I am confused. Is the printer connected to your router via ethernet or you computer via ethernet? If to the router, how was it initially connected (wired or wireless) when you set it up?
What operating system(s) are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Airport Express connected to WiFi but not visible on iPad

I have set up the airport express and it is connected wirelessly to my new BT HomeHub (green light on Airport Express). However, I cannot see it in the choices (I have Apple TV also) so I cannot play my music through my stereo via Airport Express which is how I used to do it with the Sky router. Am I missing something obvious here?

OK - Just started from scrath again - and it all seems to be working

Why does Time Machine not work over wifi but only via ethernet cable ?

Hi everyone,
It's been some time I have this problem now.
The first time I backed up my mac within Time Capsule with time machine, I chose to use the ethernet cable because the gigabit connection is much faster than the wifi for the first back up, but now, any time I want to update this back up, I need to connect the cable, cause "Time Machine can not connect to the Drive I picked" over wifi.
This is so annoying. Does anyone have a similar issue ?
Any solution ?
When I got this "error" I can use Utility Airport and get full access to the drive, even in finder. The only thing that doesn't work is TimeMachine connecting to the drive, even if it is detected by TimeMachine itself.
Thanks.
Riccardo

Typical Yosemite.
I suggest a full reconfigure of the TC.
Follow this list..
No files are deleted on the TC doing this although you might have to repoint your laptop to the backup.
Note.. even if TM does connect it will say it is going to do a new backup.. it is only when it starts that it discovers the backup exists and increments it.
Start from a factory reset. No files are lost on the hard disk doing this.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Apple TV doesn't recognize computer over WiFi, but does through Ethernet

Home Sharing from iTunes on my Mac Pro to an Apple TV (2nd Generation) only works if the Apple TV is connected to the router using Ethernet (i.e., hardwired). With WiFi (using the same router), the Apple TV won't detect the Mac Pro library. Everything else works fine over WiFi (e.g., Netflix and movie rentals). I can even control the Apple TV using my iPad when connected via WiFi or Ethernet. The only thing that doesn't work via WiFi is access to a network iTunes library. Any suggestions? The router is in bridge mode (i.e., it is an extension of the router that the Mac Pro is connected to). However, since the hardwire connection works, why wouldn't the WiFi connection work? And why does it work for everything but the network library.

Thanks for the suggestions. The problem actually solved itself. When I unplugged my Apple TV, the wireless wasn't recognized so I put it to sleep and woke it back up. When it came back on, the wireless recognized my Mac Pro library. If anyone else has trouble, you might try getting the Apple TV to recognize the desktop by using a hardwire. Then restart the Apple TV (or put it to sleep and wake it back up) with the ethernet unplugged and see if it will show up.
By the way, the bridge mode on my extender isn't a problem. I can hardwire or wireless to the extender router and the IP address on the Apple TV is the same as the host router (i.e., the one that the Apple TV is not plugged into).
Thanks again.
-Andrew

Airport Disk Utility Doesn't See External Drive, But Airport Utility Does?

Hey! I am a recent Apple convert and just got a brand new MacBook and Airport Extreme. I am trying to get my Maxtor OneTouch 320GB HDD to work with the Extreme, but to no avail. The Airport Utility sees my HDD, but the Airport Disk Utility doesn't? Any hints/tips on how to fix this problem? Any help is appreciated! Thanks!

All I can think of is that the drive is formatted in NTFS which I have heard cannot be read by the AEBS(Airport Extreme Base Station), but I am confirming this right now in a different message. If you can copy the files, format your drive in HFS+(the Mac's standard file system), then reload the files. See if it works and reply back.

Airport utility -6753 on Wifi, but ok on ethernet

Similar Messages

Maybe you are looking for