Airport Utility and new AirPort Express - Window XP

I have a desktop PC that is hardwired into my wireless router and a laptop PC that is connected wirelessly, both are running Windows XP. My AirPort Utility on my Desktop will not recognise my new AirPort Express, but my wireless laptop will. Here's the fun part....when I click on the "Continue" button to complete the initial setup the Utility goes through the "Connecting To Network" procedure but does NOT continue past. Same thing happens if I click "Manual Setup"I have reset the AirPort Express and still have no luck. Not sure what to do now...can anyone help?

There are many in the same situation. See this thread
https://discussions.apple.com/message/23470358#23470358
And there is a fix but Apple keep deleting messages that mention it.

Similar Messages

Setting up Air play with new time capsule and newer airport express?

I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up? I was also wondering how to transition the network over from the old express to the new time capsule as far software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.

Your setup is very easy..
This is how I would do it.
Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
After 20min power up the cable modem. Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
The extend wireless setup is all done straight from the existing setup.
Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.

Express, Airport Utility and sleepless nights

Hi, Don't know if anyone can help my recent sleep patters I am running Windows Vista on my PC albeit everything else in the house is Apple. Including MacBook Pro, ipads and iphones... amongst others
I have a Thompson TG582n modem router which is connected via Ethernet to the WAN port of my recently purchased Extreme A1408. I have configured using Airport Utility 5.5.3 for Windows and eventually created a wireless network... 'Appleb58c63'.... I have checked the 'extend this network' and all good so far. The signal is good, but only as good as the Thompson modem router. So to 'extend' the signal I have purchased an Express A1264. I have followed every thread on this forum in attempt for the AU to recoginse the AX... I have even balanced on my head with one arm out of the window
Bottom line is it will not recognise the AX 'wirelessly'... If I connect via Ethernet then I do get recognition & I have tried to configure it via Ethernet and then go wireless but alas....... I am usually a stoic person but I have to say I am beaten on this....
Any help on the AX would be most appreciated... the sleep I will sort out.
Thanks

The plot thickens.... are you ready for this one! I checked for wifi on my BB and sure enough the Express showed up.... still doesn't appear in A Utility on the PC though. Then I checked on my Mac Book and...... well it self configured, recognised the Base Station Extreme and then also found the Express and configured itself!!! However, I go back to Utility on the PC and still it doesn't recognise the Express??
On my Mac Book it is showing Modem, Extreme & Express are all now connected to the 'Apple Network b58b63'. I have placed Extreme at the far end of the house and the Mac Book still recognises it but when stood in front of it with the Blackberry the signal for the wifi Network drops low.... yet the Mac Book & Ipads are all good signal... Ah well...
My intention when buying the Express was to 'extend' the signal, as when in various parts of the house the signal is weak and FaceTime etc. sometimes drop out.
I'm not sure if I've done that... have I?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

My Windows XP AirPort util and Bonjour can't find any wireless device

I have both macbook and a PC laptop.
I just started using my TimeCapsula and all features (Internet gateway, access to the USB printer and the external harddisk) are visible and working fine when using my macbook.
My PC wireless card seems to be working fine too and I can access the Internet using the Airport gateway.
My problem is that Airport Util and Bonjour on my PC "can't find any wireless devices" (even though It is clearly working fine) and therefore don't detect/mount the external drive or the Printer.
Thanks!

How do your Extreme and Express connect to one another? Wired Ethernet between the two, or wirelessly?
Try unplugging the Express. Does that change anything?
Wireless interference could cause the symptoms you're describing. Even though you did nothing to your wireless network, the presence of other wireless networks or introduction of nearby devices will bring interference where there was none before.
AirPort and Bluetooth: Potential sources of interference for wireless devices and networks
Try changing wireless channels; use "automatic" unless you have reason to use a specified channel. Try checking "interference robustness". Altering these settings may help, but they could make things worse.
If you are unable to configure a device over Airport, or changing a setting leaves you unable to configure it wirelessly, connect its Ethernet port to your computer's Ethernet port and Airport Utility should find it.
As a last resort, try a "hard reset" followed by re-configuring the Extreme, Express, or both. Start by removing your Express from the network. Re-configure the Extreme and see if that fixes things. If it does, add the Express to your network and re-configure it as well.
AirPort troubleshooting guide
I open airport utility ... can not locate any of my wireless devises, airport extreme base,, airport express, apple tv, wifi printer.
AirPort Utility will only detect Apple AirPort base stations (Extreme, Express, Time Capsule) for purposes of configuring them. It is not designed to detect or configure other wireless devices like your printer.

AirPort Utility for old Airport Express

Wanted to change name and password for an older Airport Express. Went to Airport Utility and received this message. "This version of AirPort Utility doesn’t support this base station." Now what?

The 5.6 version does work in Lion..
http://support.apple.com/kb/DL1482
Unless they have done something without telling me.
But it will not install into Mountain Lion. At least directly..
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
I have had no issues getting it to work.

How do i get airport utility to recognize airport express?

Airport express does not show up on my list of devices when I start up Airport Utility. I'd love to use express with my stereo, but I cannot.

If that AirPort Express hasn't been configured, there are two ways to get AirPort Utility to "see" it: (1) Connect an Ethernet cable between the Express and your Mac. This works best if you don't need the Ethernet of the Express to connect to another router. (2) Use the AirPort/WiFi menu bar item to look for a network named in the form "Apple Network xxxxxx". That's the temporary network that the Express is creating. If you select that network, AirPort Utility should list the Express. Once you've configured the Express and restarted it, you'll have to reselect the appropriate wireless network.

Why can't my MB Air's Airport Utility find my Airport Express?

So I just got a Macbook Air for college and an Airport Express so I could have a secure connection to the internet, but after trying to set it up in my dorm, Airport Utility can't find it. I plugged in the Ethernet cable that is hooked up to the wall's Ethernet outlet in the WAN port and then I plugged the Airport's power cord into the power outlet and it's light turned solid green and it was ready to go. Then I go on my Mac and open Airport Utility and it tells me that no configured Airport base stations have been found, but it will continue searching. The Wi-fi on my computer is turned on, the Airport is in good range and is not anywhere near a radio or microwave or metal, and my college does not prohibit personal routers, there are tons already on my floor. How do I fix this? Class starts soon
If this is any help, I have Airport Utility version 6.3.1 and an Airport Express 802.11n wi-fi

In order for the AirPort Utility to find the AirPort Express it must be connected to either the Express' wireless network or to its LAN port. By default, the Express will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN. Can your MacBook Air see this network?

Apple Software Update always lists AirPort Utility 5.3.1 for Windows

Hi all.
My Apple Software Update always lists AirPort Utility 5.3.1 for Windows as an available update. I've checked, and yes - it has been updated successfully. However, the update is still being listed in ASU as being available. Anyone else had this problem?
Thanks,
John

Okay. If you like, we could check to see if the Airport Utility is being correctly recorded in your Windows Installer database.
If interested in doing that, download and install the Windows Installer CleanUp utility. (We're not going to be using it to remove anything just at the moment ... just check on the Installation database more closely.)
Description of the Windows Installer CleanUp Utility
Now launch the utlity (Start > All programs > Windows Install Clean Up).
What version number appears next to the Airport utility for you in there?
For example, I just downloaded and installed the Airport Utility, and in my Installer CleanUp I'm seeing the Airport entry as "(All Users) AirPort \[5.3.1.9]".

HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

Printer problem with Airport Utility and Epson CX5500

Hi,
I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
Here is that post:
ideapod
*Posts: 5*
*Registered: Jul 16, 2007*
*Re: Problem connecting a Epson USB Printer*
*Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
+Hi there,+
+I had the same problem, but with an Epson CX5500.+
+Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
+Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
Cheers,
Mark
The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

Airport Utility and new AirPort Express - Window XP

Similar Messages

Maybe you are looking for